Description:
Statfree
®
Type T2 meets the worksurface requirements of ANSI/ESD S20.20 and EIA-625. This material
is a dual purpose rubber matting material. The two layer construction allows it to be used as a dissipative
or a conductive matting product. The soft dissipative layer makes an excellent table mat, ideal for use in
soldering and assembly areas. This rubber material has superior resistance to heat, abrasion, chemicals, and
is easy to clean and maintain. Statfree
®
Type T2 material will not melt and does not burn when coming into
contact with hot metal parts or soldering debris. It is amine, chloride, sulfide, alumina, and magnesia free.
Statfree
®
Type T2 is suitable for use with continuous monitors.
Statfree
®
Type T2 is manufactured without any ozone depleting substances, and in accordance with
the Montreal Protocol.
Electrical Properties:
BLUE, DARK GREY,
BEIGE, DARK BLUE
Disclaimer:
All statements, technical data, and recommendations
contained herein are based upon tests we believe to
be reliable. However, the accuracy or completeness
thereof is not guaranteed. The proper and correct
applications of products and data is the responsibility
of the user. Statements or recommendations not
contained herein shall have no force or effect unless
embodied in a written agreement signed by
authorized offers of Desco Industries, Inc.
Property
RTT Resistance:
RTG Resistance:
Charge Decay:
Test Method
ESD S4.1
ESD S4.1
FTMS 101C, Method 4046
Value
1
0
6
- 10
8
Ohms
10
6
- 10
8
Ohms
0.01seconds
Limited Lifetime Warranty:
Desco warrants for one year that
Statfree
®
matting products will be free
of defects in materials and workman-
ship and will guarantee dissipative/
conductive mat properties for the life of
the mat. Damage to matting caused by
misuse of any kind, including using
inappropriate cleaners is not covered
by Desco Limited Warranty.
Electrical Properties obtained by testing to industrial standards by an
independent testing laboratory @ 100 Volts and 50% relative humidity unless
otherwise specified. Complete text of the test report is available upon request.
Specifications:
Construction:
Thickness:
Color:*
Texture:*
Weight:
Hardness:
Heat Resistance:
Chemical Resistance:
Dual-layer rubber material
0.060" (1.5mm)
Blue, Dark Blue, Dark Grey, Beige (top), Black (bottom)
Slight embossed
0.43 lbs./sq. ft. (0.2g/cm
2
)
65 ± 5 Shore “A”, per ASTM-D2240
Does not melt or burn when coming into contact with hot solder and soldering irons.
Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons,
mineral oil, aldehydes, and amines
Tolerances:
Width +/- .250"
Length +/- .250" every 1
linear foot of running material.
*Color and texture may vary between lots and mills
See reverse side for available
mat and roll sizes.
Grounding: This material must be properly grounded for optimum electrical performance. Ask for Technical Bulleltin TB-2000
for mat grounding instructions.
Cleaning: Use only ESD mat cleaner such as Reztore™ Surface & Mat Cleaner to clean and extend mat useful life. Do not
use cleaners contaiing silicone as silicone will create an insulative film on the surface. Do not sue solvent based cleaners
as solvents will dry out matting and may cause curling.
Made in America
STATFREE
®
MATERIAL, DISSIPATIVE, RUBBER, 2-LAYER, 0.060" (1.5mm)
DESCO WEST:
3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST:
90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
MATERIAL TYPE T2
DRAWING PM-104
DATE:
4/05
© 2005 DESCO INDUSTRIES INC.
Employee Owned
Item Number Reference For Statfree
®
Type T2 Rubber, Dissipative, 2-Layer
KITS
Mat Top Kit Item Numbers
SIZE
24" x 36"
24" x 48"
BEIGE
66030
66035
BLUE
66040
66045
DK. GREY
66050
66055
DK. BLUE
66051
66056
Look for the Statfree
®
brand on Desco
ESD matting. All Desco mat top kits are
permanently marked for your
protection and auditing purposes.
MAT TOP KIT INCLUDES
1 Benchmat, Type T2, size as specified
1 09826, common point ground cord
1 09864, universal snap kit
ROLL STOCK
0.060" (1.5mm)
THICK ROLLS
Type T2
Is Also
Available
In Full
Rolls
Hardware is not included with rolls.
As a general rule, continuous runs of ESD matting should
be grounded at ten-foot intervals to ensure path-to-ground
and not substantially increasing RTG. Each individual ESD
mat should be grounded with ground snap located no
further than five feet from either end.
© 2005 DESCO INDUSTRIES INC.
Employee Owned
Roll Stock Item Numbers
SIZE
24" x 40'
30" x 40'
36" x 40'
48" x 40'
BEIGE
66060
66115
66065
66090
BLUE
66070
66110
66075
66095
DK. GREY
66080
66105
66085
66100
DK. BLUE
66081
66106
66086
66101
Matting materials have a tendency to shrink slightly when first unrolled. In applications where
length is critical, allow the material to relax for at least 4 hours before cutting to size. Always
trim with a sharp knife or razor blade.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
