1N5186 thru 1N5188, 1N5190
VOIDLESS-HERMETICALLY SEALED FAST
RECOVERY GLASS RECTIFIERS
Qualified per MIL-PRF-19500/424
DESCRIPTION
This “fast recovery” rectifier diode series is military qualified and is ideal for high-reliability
applications where a failure cannot be tolerated. These industry-recognized 3.0 amp rated
rectifiers for working peak reverse voltages from 100 to 600 volts are hermetically sealed with
voidless-glass construction using an internal “Category
1”
metallurgical bond. Microsemi also
offers numerous other rectifier products to meet higher and lower current ratings with various
recovery time speed requirements including fast and ultrafast device types in both through-hole
and surface mount packages.
Important:
For the latest information, visit our website
http://www.microsemi.com.
Available on
commercial
versions
Qualified Levels:
JAN, JANTX
and JANTXV
FEATURES
•
•
•
•
•
•
JEDEC registered 1N5186 thru 1N5190 series.
Voidless hermetically sealed glass package.
Working Peak Reverse Voltage 100 to 600 volts.
Internal “Category
I
”
metallurgical bond.
JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/424.
RoHS compliant versions available (commercial grade only).
“B” Package
APPLICATIONS / BENEFITS
•
•
•
•
•
•
•
•
Fast recovery 3 amp 100 to 600 volt rectifiers.
Military and other high-reliability applications.
General rectifier applications including bridges, half-bridges, catch diodes, etc.
High forward surge current capability.
Extremely robust construction.
Low thermal resistance.
Controlled avalanche with peak reverse power capability.
Inherently radiation hard as described in Microsemi “MicroNote
050”.
MAXIMUM RATINGS
Parameters/Test Conditions
Symbol
Junction and Storage Temperature
T
J
and T
STG
(1)
Thermal Resistance Junction-to-Lead
R
ӨJL
o
Forward Surge Current @ 8.3 ms half-sine, T
A
= +150 C
I
FSM
V
RWM
Working Peak Reverse Voltage
1N5186
1N5187
1N5188
1N5190
Average Rectified Forward Current
Maximum Reverse Recovery Time
@ T
A
= +25 C
o
@ T
A
= +150 C
1N5186
1N5187
1N5188
1N5190
o
I
O
t
rr
Solder Temperature @ 10 s
Notes:
1. At 3/8 inch (10 mm) lead length from body.
T
SP
Value
-65 to +175
20
80
100
200
400
600
3.0
0.700
150
200
250
400
260
Unit
o
C
o
C/W
A
V
A
ns
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158
Tel: (978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
o
C
T4-LDS-0216, Rev. 1 (111512)
©2011 Microsemi Corporation
Page 1 of 3
1N5186 thru 1N5188, 1N5190
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Hermetically sealed voidless hard glass with tungsten slugs.
TERMINALS: Tin/lead (Sn/Pb) over nickel (Ni) coat or RoHS compliant matte-tin (commercial grade only) over copper.
MARKING: Body is coated and marked with part number.
POLARITY: Cathode band.
TAPE & REEL option: Standard per EIA-296. Consult factory for quantities.
WEIGHT: 797 milligrams.
See
Package Dimensions
on last page.
PART NOMENCLATURE
JAN
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
Blank = Commercial
1N5186
e3
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
JEDEC type number
See
Electrical Characteristics
table
Symbol
V
(BR)
V
RWM
V
F
I
R
t
rr
SYMBOLS & DEFINITIONS
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature
range.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature.
Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from
the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs.
ELECTRICAL CHARACTERISTICS
MINIMUM
BREAKDOWN
VOLTAGE
TYPE
V
(
BR)
@ 100
µA
Volts
FORWARD
VOLTAGE
MAXIMUM
REVERSE
CURRENT
I
R
@ V
RWM
25
o
C
µA
100
o
C
µA
V
F
@ 9 A (pulsed)
MIN
Volts
MAX
Volts
1N5186
1N5187
1N5188
1N5190
120
240
480
660
0.9
0.9
0.9
0.9
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
100
100
100
100
T4-LDS-0216, Rev. 1 (111512)
©2011 Microsemi Corporation
Page 2 of 3
1N5186 thru 1N5188, 1N5190
PACKAGE DIMENSIONS
Symbol
BD
LD
BL
LL
Dimension
Inch
Millimeters
Min
Max
Min
Max
0.115
0.155 2.92
3.94
0.038
0.042 0.97
1.07
0.150
0.300 3.81
7.62
1.00
1.50
25.40
38.10
Notes
3
4
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Dimension BD shall be measured at the largest diameter. The BL dimension shall include the entire body including slugs.
4. Dimension BL shall include the sections of the lead over which the diameter is uncontrolled.
This uncontrolled area is defined as the zone between the edge of the diode body and extending .050 inch (1.27
mm) onto the leads.
5. In accordance with ASME Y14.5M, diameters are equivalent to
Φx
symbology.
T4-LDS-0216, Rev. 1 (111512)
©2011 Microsemi Corporation
Page 3 of 3
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
