Z201 (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/°C,
PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 %
and Load Life Stability of ± 0.005 %
INDUSTRY BREAKTHROUGH
FEATURES
Temperature coefficient of resistance (TCR):
± 0.05 ppm/°C typical (0 °C to + 60 °C)
± 0.2 ppm/°C typical (- 55 °C to + 125 °C,
+ 25 °C ref.)
Power coefficient of resistance “R due to self
heating”: ± 5 ppm at rated power
Rated power: 0.6 W at 70 °C
0.3 W at 125 °C
Resistance tolerance: to ± 0.005 %
Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated
power
Resistance range: 10
to 100 k (higher or lower values
of resistance available)
Electrostatic discharge (ESD) up to 25 000 V
Non inductive, non capacitive design
Rise time: 1.0 ns without ringing
Current noise: 0.01: - 40 dB
Thermal EMF: 0.1 µV/°C max.
0.05 µV/°C typical
Voltage coefficient: < 0.1 ppm/V
Non inductive: 0.08 µH
Terminal finishes available: lead (Pb)-free
tin/lead alloy
Maximum working voltage: 300 V
Drop in replacement for S102C/K
Matched sets are available per request
For better performances please contact us
Any value at any tolerance available within resistance rage
INTRODUCTION
IM
PR
O
VE
D
The Z-Foil technology provides a significant reduction of the
resistive component’s sensitivity to ambient temperature
variations (TCR) and applied power changes (PCR).
Designers can now guarantee a high degree of stability and
accuracy in fixed-resistor applications using solutions based
on Vishay’s revolutionary Z-Foil technology.
Our application engineering department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
The Z201 (0.150" lead spacing) and Z201L (0.200" lead
spacing) Bulk Metal
®
Z-Foil resistors represent an industry
breakthrough. This is the 3
rd
in a series of ultra-precision
resistors since the first Bulk Metal
®
Foil resistor was
introduced by in 1962. Each represents an improvement on
the earlier model. The TCR slope of the Z201 is 0.2 ppm/C
(- 55 °C to + 125 °C, + 25 °C ref.) and is an order of
magnitude better than the original S102C. The Bulk Metal
®
Z-Foil resistor is the ultimate choice in the most demanding
analog applications.
Percent of Rated Power at + 125 °C
TABLE 1 - TOLERANCE AND TCR VERSUS
VALUE
STANDARD
TOLERANCE
± 0.005 %
± 0.005 %
± 0.01 %
TYPICAL TCR AND
MAXIMUM SPREAD
- 55 °C TO + 125 °C
(+ 25 °C REF.)
± 0.2 ± 0.6 ppm/°C
± 0.2 ± 0.8 ppm/°C
100
to 100 k
80
to < 100
50
to < 80
± 0.2 ± 1.0 ppm/°C
± 0.2 ± 1.3 ppm/°C
± 0.2 ± 1.6 ppm/°C
25
to < 50
10
to < 25
± 0.01 %
± 0.02 %
* Pb containing terminations are RoHS compliant, exemptions may apply
Document Number: 63113
Revision: 25-Mar-10
For any questions, contact:
foil@vishaypg.com
www.foilresistors.com
1
PR
O
DU
CT
APPLICATIONS
Precision amplifiers, high precision instrumentation,
medical and automatic test equipment
Laboratory, audio (high end stereo equipment)
EB applications, military, airborne and space
Down-hole (high temperature)
FIGURE 1 - POWER DERATING CURVE
200
%
175
%
150
%
125
%
100
%
75
%
50
%
25
%
0
- 75 - 50 - 25
- 55 °C
+ 70 °C
Double Rated Power
Rated Power
Safe operation
for < 150 ppm
ΔR
after
2000 hours
load life
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Ambient Temperature (°C)
Z201 (Z-Foil)
Vishay Foil Resistors
FIGURE 2 - TRIMMING TO VALUES
(conceptual illustration)
FIGURE 3 - TYPICAL TCR CURVE Z-FOIL
+ 500
+ 400
+ 300
Interloop Capacitance
Reduction in Series
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Note:
Foil shown in
black,
etched spaces in
white
FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS
Front View
L
VISHAY
XXXX
Z201
Date Code
07
16
Year
Week
ST*
Model
Name
H
IM
PR
O
VE
D
LS
Lead Material #22 AWG
Round Solder Coated Copper
* The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the unit
after all soldering processes.
LS
W
L
H
0.326 ± 0.010
8.28 ± 0.25
ST
0.010 min
0.254 min
SW
0.035 ± 0.01
1.02 ± 0.13
LL
1.000 ± 0.125
25.4 ± 3.18
Z 201
Inches
mm
0.150 ± 0.005
3.81 ± 0.13
Z 201 L
Inches
mm
0.200 ± 0.005
5.08 ± 0.13
0.105 ± 0.010
2.67 ± 0.25
0.300 ± 0.010
7.62 ± 0.25
TABLE 2 - Z201 SPECIFICATIONS
Stability
± 0.005 % max.
R
at 0.1 W/+ 70 °C
± 0.015 % max.
R
at 0.3 W/+ 125 °C
± 0.01 % max.
R
at 0.05 W/+ 125 °C
± 0.05 % max.
R
at 0.3 W/+ 125 °C
Load Life at 2000 h
Load Life at 10 000 h
www.foilresistors.com
2
For any questions, contact:
foil@vishaypg.com
PR
O
DU
CT
+ 100
ΔR
0
R
(ppm)
- 100
- 200
- 300
0.05 ppm/°C
- 0.1 ppm/°C
0.1 ppm/°C
0.14 ppm/°C
- 400
- 0.16 ppm/°C
- 25
0
0.2 ppm/°C
- 500
- 55
+ 25
+ 60 + 75
+ 100 + 125
Ambient Temperature (°C)
Current Path
Before Trimming
+ 200
W
Rear View
Optional Customer Part
Number
Print specification, etc. if required
XXXXXX
100R01
0.01%
Resistance
Value
Code
Tolerance
SW
LL
Document Number: 63113
Revision: 25-Mar-10
Z201 (Z-Foil)
Vishay Foil Resistors
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-55182
CHAR J
Test Group I
Thermal Shock
Short Time Overload
Test Group II
Resistance Temperature
Characteristic
Low Temperature Storage
Low Temperature Operation
Terminal Strength
Test Group III
DWV
Resistance to Solder Heat
Moisture Resistance
Test Group IV
Shock
Vibration
Test Group V
Life Test at 0.3 W/+ 125 °C
2000 hours
10 000 hours
Test Group Va
Life Test at 0.6 W (2 x Rated Power)/+ 70 °C, 2000 hours
Test Group VI
High Temperature Exposure
Test Group VII
Voltage Coefficient
Z201
MAXIMUM
R
TYPICAL
R
IM
PR
O
VE
D
STANDARD MEASUREMENT
(at room temperature)
Standard Test Conditions:
Temperature: + 23 °C ± 2 °C
Relative humidity: 35 to 65 % RH
Lead test point: 0.5" (12.7 mm) from resistor body
IMPROVED PERFORMANCE TESTING
The preceding information is based on product directly off the production line. Improved performance (meaning increased time
stability with load and other stresses) is available through factory conducted "Improved Performance Testing". The test routine
is usually tailored to the user’s stability objectives. A screened product can be brought down to a potential load life drift of less
than 50 ppm.
For example, the datasheet “7 Technical Reasons to Specify BMF Resistive Components” shows the drift characteristics of a
standard product.
Various screen test routines are available and all anticipated stresses must be taken into account before settling on one specific
test routine. Our applications engineering department is available to discuss and recommend appropriate routines given the full
spectrum of anticipated stresses and stability requirements.
Document Number: 63113
Revision: 25-Mar-10
For any questions, contact:
foil@vishaypg.com
PR
O
DU
CT
± 0.2 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.003 % (30 ppm)
± 25 ppm/°C
± 0.15 %
± 0.15 %
± 0.2 %
see Table 1
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.05 ppm/°C
(0 °C to + 60 °C)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
± 0.15 %
± 0.1 %
± 0.4 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.05 % (500 ppm)
± 0.002 % (20 ppm)
± 0.005 % (50 ppm)
± 0.01 % (100 ppm)
± 0.2 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
± 0.5 %
± 2.0 %
± 0.015 % (150 ppm)
± 0.05 % (500 ppm)
± 0.01 % (100 ppm)
± 0.03 % (300 ppm)
± 0.5 %
± 0.015 % (150 ppm)
± 0.01 % (100 ppm)
± 2.0 %
± 0.1 % (1000 ppm)
± 0.05 % (500 ppm)
0.005 %/V
< 0.00001 %/V
< 0.00001 %/V
www.foilresistors.com
3
Z201 (Z-Foil)
Vishay Foil Resistors
TABLE 4 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1453250R000V9L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
K
= k
CHARACTERISTICS
(1)
0
= standard
9
= lead (Pb)-free
1 to 999
= custom
Y
1
4
5
3
2
5
PRODUCT CODE
1453
= Z201
1454
= Z201L
RESISTANCE TOLERANCE
V
= ± 0.005 %
T
= ± 0.01 %
Q
= ± 0.02 %
A
= ± 0.05 %
B
= ± 0.1 %
C
= ± 0.25 %
D
= ± 0.5 %
F
= ± 1.0 %
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1453 250R000 V 9 L:
TYPE: Z201
VALUE: 250.0
ABSOLUTE TOLERANCE: ± 0.005 %
TERMINATION: lead (Pb)-free
PACKAGING: bulk
HISTORICAL PART NUMBER: Z201T 250R00 V B (will continue to be used)
Z201
MODEL
Z201
Z201L
T
TERMINATION
T
= lead (Pb)-free
None = tin/lead
250R00
OHMIC VALUE
250.0
IM
PR
O
VE
D
Note
(1)
For non-standard requests, please contact application engineering.
www.foilresistors.com
4
For any questions, contact:
foil@vishaypg.com
PR
O
DU
CT
0
R
0
0
0
V
9
L
PACKAGING
L
= bulk
V
B
ABS. TOLERANCE
V
T
Q
A
B
C
D
F
= ± 0.005 %
= ± 0.01 %
= ± 0.02 %
= ± 0.05 %
= ± 0.1 %
= ± 0.25 %
= ± 0.5 %
= ± 1.0 %
PACKAGING
B
= bulk
Document Number: 63113
Revision: 25-Mar-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and
conditions of purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision
Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and
all liability, including without limitation special, consequential or incidental damages, and (iii) any and
all implied warranties, including warranties of fitness for particular purpose, non-infringement and
merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different
applications and performance may vary over time. Statements regarding the suitability of products for
certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that
are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular
application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or
by any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly
indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay
Precision Group for any damages arising or resulting from such use or sale. Please contact authorized
Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for
such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-2011
www.vishaypg.com
1
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
