Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
9
Automotive Application Guide
We classify automotive electronic equipment into the following four application categories and set usable
application categories for each of our products. When using our products for automotive electronic
equipment, please be sure to check such application categories and use our products accordingly. Should
you have any questions on this matter, please contact us.
・HEV/PHV/EV Core Control (Battery, Inverter, DC-DC)
・Automotive Locator (Car location information providing device), etc.
・ABS (Anti-Lock Brake System)
・ESC (Electronic Stability Control)
・Airbag
・Wiper
・Automatic Door
・Power Window
SAFETY
・ADAS (Equipment that directly controls running, turning and stopping), etc.
BODY & CHASSIS
・Keyless Entry System
・Electric Door Mirror
・Interior Lighting
・LED Headlight
・TPMS (Tire Pressure Monitoring System)
・Anti-Theft Device (Immobilizer), etc.
・Car Infotainment System
INFOTAINMENT
・ITS/Telematics System
・Instrument Cluster
・ADAS (Sensor, Equipment that is not interlocked with safety equipment or powertrain), etc.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
9
15
SMD POWER INDUCTORS(NS SERIES)
SMD POWER INDUCTORS（NS SERIES）
AEC-Q200 Grade 3 (we conduct the evaluation at the test condition of Grade 3.)
*Operating environment Temp:-40½85℃
■PART
NUMBER
*Operating Temp. :
-40½125℃（Including self-generated heat）
REFLOW
AEC-Q200
REFLOW
AEC-Q200
N
S △
①
1
0
1 4
②
5
T △
③
1
0 0
④
M
⑤
N
⑥
V
V
⑦
△＝Blank space
①Series name
Code
NS△
②Dimensions（L×W×H）
Code
10145
10155
10165
12555
12565
12575
③Packaging
Code
T△
Series name
SMD inductor
Dimensions（L×W×H）［mm½
10.1×10.1×4.5
10.1×10.1×5.5
10.1×10.1×6.5
12.5×12.5×5.5
12.5×12.5×6.5
12.5×12.5×7.5
④Nominal inductance
Code（example）
1R0
100
101
※R＝Decimal point
⑤Inductance tolerance
Code
M
N
⑥Special code
Code
N△
NV
⑦Internal code
Code
V
Nominal inductance［μ
H½
1.0
10
100
INDUCTORS POWER INDUCTORS
Inductance tolerance
±20％
±30％
／
Packaging
Taping
Special code
125 type standard
101 type standard
Internal code
Inductor for Industrial and Automotive
■STANDARD
EXTERNAL DIMENSIONS / MINIMUM QUANTITY
100
L
W
a
H
b
b
Type
NS 10145
NS 10155
NS 10165
NS 12555
NS 12565
NS 12575
L
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
W
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
H
4.5±0.35
（0.177±0.014）
5.5±0.35
（0.217±0.014）
6.5±0.35
（0.256±0.014）
5.5±0.35
（0.217±0.014）
6.5±0.35
（0.256±0.014）
7.5±0.35
（0.295±0.014）
a
2.8±0.1
（0.110±0.004）
2.8±0.1
（0.110±0.004）
2.8±0.1
（0.110±0.004）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
b
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
Minimum quantity [pcs]
2000
2000
2000
2000
2000
2000
Unit：mm（inch）
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to these products is reflow soldering only.
C
Type
NS 10145
NS 10155
NS 10165
NS 12555
NS 12565
NS 12575
A
2.5
2.5
2.5
2.5
2.5
2.5
B
5.6
5.6
5.6
8.6
8.6
8.6
C
3.2
3.2
3.2
3.2
3.2
3.2
Unit：mm
A
B
A
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
hq_i_smd_NS_e-E07R01
1
9
57
■PART
NUMBER
・ All the SMD Power Inductors of the catalog lineup are RoHS compliant.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive (AEC-Q200 Qualified) products for BODY & CHASSIS, and INFOTAINMENT. Please check ”Automotive Application Guide” for further details before using the products.
AEC-Q200
＜ ：AEC-Q200 qualified＞
All the SMD Power Inductors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial products and Medical products
●NS
10145 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
10145T 1R0NNVV
10145T 1R5NNVV
10145T 2R2NNVV
10145T 3R3NNVV
10145T 4R7NNVV
10145T 5R6NNVV
10145T 6R8NNVV
10145T 100MNVV
10145T 150MNVV
10145T 220MNVV
10145T 330MNVV
10145T 470MNVV
10145T 680MNVV
10145T 101MNVV
10145T 151MNVV
10145T 221MNVV
10145T 331MNVV
10145T 471MNVV
10145T 681MNVV
10145T 102MNVV
10145T 152MNVV
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
5.6
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0049
0.0060
0.0085
0.0100
0.0144
0.0181
0.0230
0.0270
0.0381
0.0570
0.0880
0.130
0.150
0.230
0.350
0.510
0.700
1.03
1.57
2.58
3.70
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc1
Idc2
12.54
8.90
10.34
7.99
8.91
6.64
7.33
6.10
6.69
5.03
5.85
4.45
5.05
4.22
4.22
3.10
3.44
3.00
2.87
2.30
2.36
1.90
2.00
1.50
1.66
1.45
1.40
1.10
1.11
0.86
0.91
0.78
0.71
0.64
0.61
0.52
0.50
0.42
0.41
0.32
0.36
0.27
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Note
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
INDUCTORS POWER INDUCTORS
／
58
●NS
10155 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
10155T 1R5NNVV
10155T 2R2NNVV
10155T 3R3NNVV
10155T 4R7NNVV
10155T 6R8NNVV
10155T 100MNVV
10155T 150MNVV
10155T 220MNVV
Nominal inductance
［μH½
1.5
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0060
0.0072
0.0097
0.0112
0.0159
0.0200
0.0310
0.0430
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc1
Idc2
11.90
8.39
10.00
7.61
8.50
6.49
7.40
6.01
6.00
4.98
4.49
4.40
4.03
3.40
3.37
2.80
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
Note
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
●NS
10165 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
10165T
10165T
10165T
10165T
10165T
10165T
10165T
10165T
1R5NNVV
2R2NNVV
3R3NNVV
4R7NNVV
6R8NNVV
100MNVV
150MNVV
220MNVV
Nominal inductance
［μH½
1.5
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0062
0.0074
0.0086
0.0112
0.0140
0.0174
0.0280
0.0350
Rated current ※） ［A½
Temperature rise current
Saturation current
Idc1
Idc2
13.60
8.04
10.80
7.32
9.30
6.76
7.70
5.88
6.00
5.22
5.20
4.66
3.60
3.84
3.10
3.41
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
Note
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
※
） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
hq_i_smd_NS_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
9
■PART
NUMBER
●NS
12555 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
6R0NN V
100MN V
150MN V
220MN V
330MN V
470MN V
680MN V
101MN V
151MN V
221MN V
331MN V
471MN V
681MN V
102MN V
152MN V
Nominal inductance
［μH½
6.0
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Inductance tolerance
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0140
0.0175
0.0233
0.0297
0.0415
0.0618
0.0832
0.117
0.215
0.270
0.410
0.520
0.870
1.44
1.73
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc1
Idc2
5.01
5.60
4.73
5.04
3.89
4.18
3.20
3.81
2.64
3.16
2.23
2.70
1.81
2.14
1.53
1.86
1.10
1.30
1.00
1.18
0.82
0.96
0.68
0.80
0.48
0.61
0.41
0.46
0.40
0.44
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Note
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
●NS
12565 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
2R0NN
4R2NN
7R0NN
100MN
150MN
220MN
330MN
470MN
680MN
101MN
151MN
221MN
V
V
V
V
V
V
V
V
V
V
V
V
Nominal inductance
［μH½
2.0
4.2
7.0
10
15
22
33
47
68
100
150
220
Inductance tolerance
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0080
0.0126
0.0162
0.0199
0.0237
0.0310
0.0390
0.0575
0.0775
0.123
0.173
0.273
Rated current ※） ［A½
Temperature rise current
Saturation current
Idc1
Idc2
13.91
7.60
9.40
5.91
7.80
5.21
6.00
4.75
5.60
4.33
4.20
3.91
3.80
3.22
3.34
2.78
2.70
2.30
2.23
1.81
1.80
1.54
1.39
1.18
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
Note
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
INDUCTORS POWER INDUCTORS
／
●NS
12575 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
12575T
1R2NN V
2R7NN V
3R9NN V
5R6NN V
6R8NN V
100MN V
150MN V
220MN V
330MN V
470MN V
680MN V
101MN V
151MN V
221MN V
102MN V
Nominal inductance
［μH½
1.2
2.7
3.9
5.6
6.8
10
15
22
33
47
68
100
150
220
1000
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0058
0.0085
0.0099
0.0116
0.0131
0.0156
0.0184
0.0260
0.0390
0.0515
0.0900
0.110
0.161
0.300
1.170
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc1
Idc2
18.08
9.15
13.91
7.69
12.10
7.38
10.20
6.36
9.50
5.84
7.65
5.55
6.30
5.22
5.50
4.05
4.30
3.48
3.60
2.95
2.78
2.10
2.50
2.01
1.90
1.51
1.60
1.10
0.72
0.53
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Note
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
※
） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
■Derating
of Rated Current
●NS
series
Derating of current is necessary for NS series depending on ambient temperature.
Please refer to the chart shown below for appropriate derating of current.
120%
NS101 type
Ratio to rated current
120%
100%
80%
60%
40%
20%
0%
-40
-20
Idc1
Idc2
0
NS125 type
Ratio to rated current
100%
80%
60%
40%
20%
0%
-40
-20
Idc1
Idc2
0
20 40 60 80 100 120 140
Ambient Temperature (℃)
20
40
60
80
100 120 140
Ambient Temperature
(℃)
hq_i_smd_NS_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
在网上下了个在wince上跑的MP3播放器代码，编译通过 了，就是在执行的出了问题
CoCreateInstance of OLE control {22D6F312-B0F6-11D0-94AB-0080C74C7E95} failed.
>>> Result code: 0x800401 ......
依托 Zena CSS 与 Arm 完整的合作伙伴生态，加速自动驾驶的落地进程。 闭上双眼，想象你正坐上车准备去上班。车内温度和座舱设置早已根据你的习惯调整到位。上车后，汽车通过学习已经了解你的驾乘习惯，主动询问你现在是否再次前往办公室。尽管你的车目前还无法在你居住的繁忙城区实现无监督导航，但你可以双手离开方向盘，让汽车在拥堵路段自主行驶，而你只需留意路况即可。 很快地，你的车就会提示你...[详细]
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
