LM = Soldering type pushbutton switches with momentary action,
LA = Soldering type pushbutton switches with alternate action.
:
T1
Contact Arrange
:
1AB = 1 NO + 1 NC, 2AB = 2 NO + 2 NC.
Round (Concave)
Part Number Table
Description
Lens, Blue, Round, 18mm, For D16
Lens, Green, Round, 18mm, For D16
Lens, Orange, Round, 18mm, For D16
Lens, Red, Round, 18mm, For D16
Lens, White, Round, 18mm, For D16
Lens, Yellow, Round, 18mm, For D16
Lens, Blue, 18 x 18mm, For D16
Lens, Green, 18 x 18mm, For D16
Lens, Orange, 18 x 18mm, For D16
Lens, Red, 18 x 18mm, For D16
Lens, White, 18 x 18mm, For D16
Lens, Yellow, 18 x 18mm, For D16
Part Number
50-001-01
50-001-02
50-001-03
50-001-04
50-001-05
50-001-06
50-003-01
50-003-02
50-003-03
50-003-04
50-003-05
50-003-06
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Page <3>
20/08/09 V1.1
Push Button Switches
Part Number Table
Description
Lens, Blue, 18 x 24mm, For D16
Lens, Green, 18 x 24mm, For D16
Lens, Orange, 18 x 24mm, For D16
Lens, Red, 18 x 24mm, For D16
Lens, White, 18 x 24mm, For D16
Lens, Yellow, 18 x 24mm, For D16
Part Number
50-002-01
50-002-02
50-002-03
50-002-04
50-002-05
50-002-06
Protection Cap
Specifications:
50-011-01
50-010-01
50-011-02
: For square head (90°).
: Most requirement of IP65, two pieces of transparent plastic, rectangular head.
: For rectangular head (90°)
Part Number Table
Description
Cover, Protection, 18 x 18mm, For D16
Cover, Splashguard, 18 x 24mm, For D16
Cover, Protection, 18 x 24mm, For D16
Part Number
50-011-01
50-010-01
50-011-02
Disclaimer
This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
C++ 属于面向对象的编程语言，OOP的思想不必多说，特别对于复杂的软件工程来说，利用OOP绝对是事半功倍，相对于传统的C来说； 当然用C来写单片机程序无可厚非，已经延续了一个传统，从大学时学的开始到工作岗位，好多人都是一直用C来做，但是既然Keil支持C++编译， 可以用C++来编写你的代码，可以利用高级语言来结构化，清晰化你的程序，为嘛不用呢！哈哈，个人看法！下面进入正题： C+...[详细]
ARM技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
