Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete
information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no
responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without
notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information
does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of
SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's
standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or
errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon
request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure
could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC
and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms
of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems
Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND
ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE.
IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES;
OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON
CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR
NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SMSC USB97C202
Page 2
Revision 1.6 (11-05-04)
DATASHEET
USB 2.0 ATA/ATAPI Controller
Datasheet
USB97C202 Datasheet Revision History
NAME
H. Wurzburg
M.Bohm
M.Bohm
P. Konasewich
M. Bohm
M. Bohm
M. Bohm
M. Bohm
SECTION/FIGURE/ENTRY
Features
Ordering Information, cover
Chapter 9 Package Outline, page 19
References to TQFP package
changed to STQFP package.
Cover – Ordering Information
Table 7.1
-
DC Electrical
Characteristics, page 15
Chapter 2 - Pin Table, page 6
Table 5.1 - USB97C202 Pin
Descriptions, page 9
Table 5.1 - USB97C202 Pin
Descriptions, page 9
Ordering information, Cover
Features, Cover
Removed USB97C202-MN-03.
Revised Input Leakage.
Changed test pin names to nTEST0,
nTEST1 & nTEST2
Changed nTest[0:2] to nTEST[0:2]
and clarified the functionality of the
XNOR test function.
Revised description of the following
pins: GPIO1 and GPIO4.
Added order numbers USB97C202-
MN-03 and USB97C202-MN-04
Added feature bullet: Can share drive
in MP3 player and 1394/USB
applications by isolating the IDE
Interface with other controllers.
Added the following description: In
part number USB97C202-MN-03 or
later ROM codes.
CORRECTION
Modified third sub bullet under 7
GPIO’s
Changed the firmware extension from
-04 to -05 for the order numbers
Added the 100 pin TQFP package
DATE
REVISED
Rev 1.6
(11-05-04)
Rev 1.6
(9-29-04)
Rev 1.6
(9-29-04)
Rev. 1.5
(02-04-04)
Rev. 1.5
(11-07-03)
Rev. 1.5
(11-04-03)
Rev. 1.5
(11-04-03)
Rev. 1.5
(11-04-03)
Rev. 1.4
(04/02/03)
1/23/03
1/09/03
H. Wurzburg
Table 5.1 - USB97C202 Pin
Descriptions, page 9
1/09/03
SMSC USB97C202
Page 3
Revision 1.6 (11-05-04)
DATASHEET
USB 2.0 ATA/ATAPI Controller
Datasheet
Table of Contents
USB97C202 DATASHEET REVISION HISTORY .........................................................................................................3
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
CHAPTER 5
GENERAL DESCRIPTION................................................................................................................5
这标志着在物流供应链打印中处于全球领先地位的美国普印力PRINTRONIX更加看好中国市场，进一步加大在中国的投资力度，依托国际性分销商和本土的行业巨头进一步深入中国市场。 来自政府相关部门的领导、自动识别行业专家、行业客户代表以及新闻媒体出席了新闻发布会，普印力全球高级销售总裁James B. McWilson以及大中华区总经理Roger Zhao出席会议，与闪联总裁孙育宁博士现场...[详细]
汽车电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
