MINIATURE RIBBONS
IDC SUPERIBBON
™
& Metal Shell
Vertical Mount Compliant Pin
Solder Cup
Right-Angle Solder Tail
Wire Wrap
Vertical Mount Solder Tail
Accessories & Application Tooling
.085 in. (2.16mm)
Density
Miniature Ribbon
Introduction
The Miniature Ribbon connector has been a mainstay in the electronics
industry for decades. First widely used in telecommunications, it has proven
itself to be a very reliable interconnection system, with generous wiping action,
high contact pressure, large mating surface area in a relatively compact for-
mat, and polarized shells to ensure proper orientation in mating.
The Miniature Ribbon connector gets its name from the ribbon-like shape of
the mating end of the contact. It is a derivative of the first connector design to
incorporate this type of interconnection where mating members are equally
flexible. Each contact is backed up by its respective insulator, resulting in high
contact pressure without concern over relaxation that can occur with a beam
or cantilever design. Industry standard sizes for this product are 14, 24, 36,
50, and 64 positions. Cinch adheres to industry-standard contact numbering
and mating geometry.
Cinch has led the way in making the Miniature Ribbon connector one of the
most cost-effective yet high-quality connector systems in the industry. From its
roots in the telecommunications industry where it is traditionally known as the
“Key Telephone” style connector (USOC Type RJ21), Cinch’s innovations in
termination, latching, and accessories have helped make the Miniature Ribbon
family the choice for applications in computers and instrumentation as well. It
is called out as the standard connector for a parallel printer interface (IEEE
1284-B, also known as “Centronics”), multi-purpose peripheral interface
(SCSI-1), and instrumentation interface (IEEE-488, also know as “GPIB”).
Cinch manufactures one of the most diverse lines of Miniature Ribbon
products in the industry. From SUPERIBBON
TM
all-plastic products with
solderless termination to full-metal shell products with solder terminations,
and even filtered versions designed to solve EMI problems, Cinch can
provide the Miniature Ribbon products you need.
Several options are available so you can find the right Cinch Miniature Ribbon
product for your application. Cinch’s method of integrating
features into the product often
reduces overall installed cost compared to other
alternatives.
Select the termination type, the configuration, the
latching and mounting methods to be used, and any accessories that
would make the installation of the connector complete.
All-Plastic
6-6
6-30
6-38
6-42
6-48
6-48
Metal Shell
6-14
6-24
6-30
6-34
6-42
6-46
IDC
Solder Cup
Wire Wrap
Vertical-Mount Solder Tail
Vertical-Mount Compliant Pin
Right Angle Solder Tail
Filtered Vertical-Mount Solder-Tail
Male/Female Adapter
Connector Face Views
6
Accessories information starts on page 6-51.
Tooling Information starts on pafe 6-54.
SUPERIBBON is a trademark of Cinch Connectors, Inc.Systems, Inc.
6-1
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Termination Options
Introduction
Cinch offers products suitable for termination by various methods:
•
IDC -- Cinch’s patented Insulation Displacement Contact (IDC) provides reliable,
low-cost termination to discrete wire, either loose or in jacketed cable. With the use
of special tools designed for field and/or factory use, wires can be terminated to the
connector without individual cutting, stripping, or soldering. Reliable performance
is ensured by the exclusive 4-point contact termination, and the built-in wire strain
relief prevents mechanical stress from reaching the termination points.
Cinch IDC connectors are available in both Metal Shell and All-Plastic
SUPERIBBON versions. They are available to terminate solid conductor (some 22
AWG, and 24-26 AWG) or stranded (24-28 AWG) wire. Likewise, a full range of
termination tooling is available.
•
Wire Wrap -- This termination style, which is also solderless, is often used when
termination must be done in place, such as in wired backplanes, etc. Cinch wire-
wrap terminated Miniature Ribbon connectors are available in both Metal Shell and
All-Plastic versions, with either .025" or .045" sq. tails.
Solder Cup -- For those applications where nothing but the lowest termination
resistance will do, Cinch offers Metal Shell Miniature Ribbon connectors with
solder-cup termination. Available with or without insulator barriers between
contact terminal areas, these products will accept up to one 22 AWG solid wire
or one 24 AWG stranded wire per contact.
Solder Tail -- This style allows Cinch Miniature Ribbon connectors to be through-
hole soldered directly to a printed circuit board. They are available in Vertical Mount
and Right-Angle Mount versions.
Compliant Pin -- This style allows termination to a printed circuit board without
soldering. This eliminates the costly cleaning/rework associated with soldering,
yet the Cinch modified-C type termination will not damage the board’s plating as
standard press-fit terminals can.
Piercing/compressing action as wire is
pressed into contact
Termination section of IDC contact
•
•
•
Configuration
Cinch Miniature Ribbon and SUPERIBBON products are available as connectors alone to
be mounted to a system’s panel or printed circuit board, or complete with hoods for use
on various types of cable assemblies. Hooded products are available with cable exits
straight back 180 degrees from the mating face (Top-Entry) or with cable exits on either
end, 90, or 270 degrees from the mating face (Standard and Reverse Orientation End-
Entry). Finally, overmold kits are available allowing you to efficiently and economically
manufacture your own “custom” cable assemblies.
End-Entry SuperShield
TM
connectors and All-Plastic SUPERIBBON connectors feature an
integral cable clamp that prevents stress on the termination area, even when the hood is
removed during assembly or repair.
Top-Entry products have cable clamps built into the hoods. These clamps are adjustable
to fit a range of cable sizes.
6
SuperShield is a trademark of Cinch Connectors , Inc.
Call Toll Free: 1 (800) 323-9612
6-2
.085 in. (2.16mm)
Density
Miniature Ribbon
Latching Options
Introduction
Miniature Ribbon and SUPERIBBON products exhibit a degree of self-locking inherent in
the contact design; however, additional locking means are recommended to prevent
connectors from being unmated inadvertently. Choices include:
•
Screwlock Hardware -- the simplest connectors require the use of separate threaded
hardware to lock mating connectors together. Some Cinch Miniature Ribbon cable
connectors include locking screws; hardware for other configurations may be found
in the Accessories section of the Miniature Ribbon line.
Some panel-mount products are available with fixed female (internal thread)
screwlocks that provide an integral threaded screwlock as part of the connector.
•
Bail Latches -- as an alternative to screwlock hardware, Cinch offers many
configurations with industry-standard bail latches. These connectors have wire clips
on each end of the socket, and mating plugs have notched ends that these clips
snap into.
Bail latches offer the advantage of operating without any tools. Because of
this, they have been standardized into several applications, including “Centronics”
36-position parallel printer interface and SCSI-1 peripheral interface bus.
Bail latch sockets include standard “straight” latches, suitable for top entry
configurations. Special latches can be ordered to replace one standard latch to fit
under the cable on end entry mating plug assemblies.
•
InstaLatch
TM
-- all Cinch SUPERIBBON all-plastic sockets and some metal shell
Miniature Ribbon sockets are available with a Cinch-patented latching system called
InstaLatch. In this passive latching system, spring clips at each end of the socket
automatically lock into windows in the shell of the mating plug securing the two
connectors together. Audible feedback confirms that the connectors are
indeed locked.
InstaLatches may be unlocked by depressing the latch at either end of the connector,
using almost any small, pointed-end tool. A special tool is also available to unlatch
InstaLatches when connectors are laid out in a tight arrangement.
•
J-Hooks -- These devices, available on selected Miniature Ribbon products,
automatically lock onto the nose and hood of mating end entry connectors. They
are easily unlatched without special tools and are more accessible than other latches
in certain applications.
6
InstaLatch is a trademark of Cinch Connectors, Inc.
6-3
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Mounting Options
Introduction
Various mounting options are available with Cinch Miniature Ribbon
and SUPERIBBON products:
•
Through-Hole/Threaded Hole -- These products require separate hardware to mount
the connector to a panel or other component. Versions are available to accommodate
#3, #4, and in some cases, through #8 hardware.
Standard size cutouts are adequate for mounting panel-mount connectors to system
panels with this type of hardware. They may be front- or rear-mounted. (Sockets with
bail latches, however, must be front-mounted unless a modified cutout is used to clear
the latch retaining hardware.)
Metal Shell PC Mount products are available in some versions with standoffs to the
printed circuit board. These may be conductive or insulated.
Standard Panel Cutout Recommendations
Rear Mounting
Front Mounting
Dimensions
Plug or Fixed-Mount Socket
Size
14
24
36
50
Float-Mount Socket
D
(14.73)
(14.73)
(14.73)
(14.73)
1.417
1.842
2.352
2.947
A
1.417 (35.99)
1.842 (46.79)
2.352 (59.74)
2.947 (74.85)
1.098
1.523
2.033
2.628
B
C
A
(35.99)
(46.79)
(59.74)
(74.85)
1.153
1.578
2.088
2.683
B
C
.635
.635
.635
.635
D
(16.13)
(16.13)
(16.13)
(16.13)
(27.89) .940 (23.88) .580
(38.68) 1.365 (34.67) .580
(51.64) 1.875 (47.63) .580
(66.75) 2.472 (62.79) .580
(29.29) .995 (25.27)
(40.08) 1.420 (36.07)
(53.04) 1.930 (49.02)
(68.15) 2.525 (64.14)
SUPERIBBON, Plug or Socket
Size
A
1.417 (35.99)
1.842 (46.79)
2.352 (59.74)
2.947 (74.85)
3.592 (91.24)
1.172
1.597
2.107
2.703
3.298
B
(29.77)
(40.56)
(53.52)
(68.66)
(83.77)
.787
1.212
1.722
2.317
2.912
C
(19.99)
(30.78)
(43.74)
(58.85)
(73.96)
.610
.610
.610
.610
.610
D
(15.49)
(15.49)
(15.49)
(15.49)
(15.49)
6
•
•
14
24
36
50
64
Panel Clips -- These devices are add-on accessories for All-Plastic products and are
available as optional configurations on certain Metal Shell products. They allow you to
mount the connector to the system panel without screws, nuts, or spacers, and leave
the connector’s mounting holes free for use in latching, if so desired.
Boardlocks -- These devices, found on certain solder-tail PC mount products, fasten the
connector to the printed circuit board with solder as part of the wave soldering process.
Thus, there is no additional labor required to complete the assembly, and a cost savings
can often be realized.
Call Toll Free: 1 (800) 323-9612
6-4
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
