Subminiature Snap Action Switch
D3M
Saves Wiring Effort, Production Steps,
and Time
• Easy wiring ensured through the Quick-Connect Terminals
• External actuator mounts in either of two directions
• Horizontal layout of terminals saves mounting space
• Same mounting pitch and internal mechanism as the
OMRON SS Subminiature Snap Action Switch
• RoHS Compliant
Ordering Information
Actuator
Pin plunger
Actuator mounting position
—
Contact type
SPST-NC
SPST-NO
Hinge lever
High ratio operating position
(“K” actuator position)
Standard operating position
(“L” actuator position)
Hinge roller lever
High ratio operating position
(“K” actuator position)
Standard operating position
(“L” actuator position)
Simulated roller lever
High ratio operating position
(“K” actuator position)
Standard operating position
(“L” actuator position)
SPST-NC
SPST-NO
SPST-NC
SPST-NO
SPST-NC
SPST-NO
SPST-NC
SPST-NO
SPST-NC
SPST-NO
SPST-NC
SPST-NO
Model
D3M-01
D3M-01-3
D3M-01K1
D3M-01K1-3
D3M-01L1
D3M-01L1-3
D3M-01K2
D3M-01K2-3
D3M-01L2
D3M-01L2-3
D3M-01K3
D3M-01K3-3
D3M-01L3
D3M-01L3-3
Model Number Legend
D3M-01
1 2 3
1.
Actuator Mounting Position
None: No
actuator
K:
Pushbutton close to actuator fulcrum
L:
Pushbutton far from actuator fulcrum
“K” Actuator Postition
“L” Actuator Postition
2.
Actuator
None:
Pin plunger
1:
Hinge lever
2:
Hinge roller lever
3:
Simulated roller lever
3.
Contact Form
None:
SPST-NC (with red pushbutton)
-3:
SPST-NO (with
black
pushbutton)
Subminiature Snap Action Switch
D3M
57
Specifications
■
Characteristics
Electrical Rating (See note 4)
Operating speed
Operating frequency
Insulation resistance
Contact resistance
Dielectric strength (See note 2)
0.1 A at 30 VDC, resistive
0.1 mm/s to 1 m/s (pin plunger models)
Mechanical: 400 operations/minute max.
Electrical: 30 operations/minute max.
100 MΩ min. at 500 VDC
100 mΩ max. including connector and 50-mm AWG28 lead wire resistance
1,000 VAC at 50/60 Hz for 1 minute between terminals of the same polarity
1,500 VAC at 50/60 Hz for 1 minute between charged metal part and ground
1,500 VAC at 50/60 Hz for 1 minute between non-charged metal part and each terminal
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s
2
(approx. 100G) max.
Malfunction: 300 m/s
2
(approx. 30G) max.
IEC IP40
175
-25°C to 85°C (at 60% RH max) with no icing
85% max. (for 5°C to 35°C)
Mechanical: 500,000 operations at 60 operations/minute
Electrical: 200,000 operations at 30 operations/minute
Approx. 2 g (pin plunger model)
Vibration resistance (See note 3)
Shock resistance (See note 3)
Degree of protection
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Life expectancy
Weight
Degree of protection against electric shock
Class I
Note: 1.
Data shown are of initial value.
2.
The dielectric strength shown is measured using a separator between the switch and metal mounting plate.
3.
For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply
at the total travel position. Contact opening or closing time is within 1 ms.
4.
The electrical ratings apply under the following test conditions: Ambient Temperature = 20
±
2
°
C, Ambient Humidity = 65
±
5%, Operating frequency = 30 op-
erations/min.
■
Approved Standards
UL Recognized/CSA Certified
Rated voltage
30 VDC
0.1 A
D3M
■
Contact Specifications
Item
Specification
Material
Contact gap
Inrush current
D3M
Minimum applicable load
(see note)
Crossbar
Gold alloy
0.5 mm
1 A max.
1 mA at 5 VDC
Specification
EN61058-1 (TÜV Rheinland approval)
Rated voltage
30 VDC
0.1 A
Testing conditions: 1E5 (100,000 operations), T85 (0°C to 85°C)
Note:
Minimum applicable loads are indicated by N standard refer-
ence values. This value represents the failure rate at a 60%
(λ
60
) reliability level (JIS C5003).
The equation
λ
60
=0.5 x 10
-6
/ operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
Engineering Data
■
Mounting Holes
All switches may be panel mounted using M2.3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.23 to 0.26 N·m.
Two, 2.4-dia. mounting hole or M2.3 screw hole
■
Contact Form
SPST-NC
SPST-NO
9.5
±0.1
58
Subminiature Snap Action Switch
D3M
Dimensions
Note: 1.
Unless otherwise specified, all units are in millimeters and a tolerance of
±0.4
mm applies to all dimensions
2.
The operating characteristics are for operation in the A direction( )
Pin Plunger Models
D3M-01
D3M-01-3
(7.2)
OF max
RF min.
PT max.
(see note 2)
A
3.5
7.6
153 gf
25 gf
0.6 mm
0.4 mm
0.1 mm
8.4
±
0.3 mm
OT min.
MD max.
OP
FP
(see note 2)
2.5
2.35
+0.1
7.7
–0.05
10
OP
7
(see note 1)
2.35
+0.1
dia.
–0.05
2.5 dia.
9.5
±0.1
29.2
5.7
(31.6)
Note:
1. The terminals connect to JST’s Dipole XA Connector.
2. The Dipole XA Connector consists of the following components.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
Hinge Lever Models (K)
D3M-01K1
D3M-01K1-3
(7.2)
OF max
RF min.
OT min.
(see note 2)
A
3.6
(see note 2)
FP
2.5
2.35
+0.1
7.7
–0.05
OP
10
Stainless steel (t = 0.3)
1
8
.2
12.9
51 gf
6 gf
1.2 mm
0.8 mm
14.0 mm
10.0
±
0.8 mm
MD max.
FP max.
OP
7
2.5 dia.
(see note 1)
+0.1
9.5
±0.1
2.35
–0.05
dia.
29.2
(31.6)
5.7
Note:
1. The terminals connect to JST’s Dipole XA Connector.
2. The Dipole XA Connector consists of the following components.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
Hinge Lever Models (L)
D3M-01L1
D3M-01L1-3
(7.2)
OF max
RF min.
(see note 2)
Stainless steel (t = 0.3)
102 gf
10 gf
0.7 mm
0.6 mm
11.5 mm
9.2
±
0.6 mm
OT min.
MD max.
FP max.
OP
FP
1
8
.2
3.6
(see note 2)
2.35
+0.1
7.7
–0.05
OP
10
2.4
A
2.5
7
(see note 1)
2.35
+0.1
dia.
–0.05
2.5 dia.
9.5
±0.1
29.2
(31.6)
5.7
Note:
1. The terminals connect to JST’s Dipole XA Connector.
2. The Dipole XA Connector consists of the following components.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
Subminiature Snap Action Switch
D3M
59
Note: 1.
Unless otherwise specified, all units are in millimeters and a tolerance of
±0.4
mm applies to all dimensions
2.
The operating characteristics are for operation in the A direction( )
Hinge Roller Lever Models (K)
D3M-01K2
D3M-01K2-3
(7.2)
3.8
4.8 dia. 3.2
A
polyacetal
resin roller
Stainless steel (t = 0.3)
17.9
OF max
RF min.
OT min.
MD max.
FP max.
OP
FP
OP
51 gf
6 gf
1.2 mm
0.8 mm
19.7 mm
15.7
±
0.8 mm
(see note 2)
12.9
(see note 2)
2.35
+0.1
7.7
–0.05
2.5
10
7
2.5 dia.
(see note 1)
+0.1
9.5
±0.1
2.35
–0.05
dia.
29.2
(31.6)
3.8
Note:
1. The terminals connect to JST’s Dipole XA Connector.
5.7
2. The Dipole XA Connector consists of the following components.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
Hinge Roller Lever Models (L)
D3M-01L2
D3M-01L2-3
(7.2)
OF max
RF min.
Stainless steel (t = 0.3)
102 gf
10 gf
0.7 mm
0.6 mm
17.2 mm
14.9
±
0.6 mm
OT min.
A 4.8 dia. 3.2 polyacetal
resin roller
(see note 2)
17.9
2.4
(see note 2)
MD max.
FP max.
OP
FP
OP
2.5
2.35
+0.1
7.7
–0.05
10
7
(see note 1)
2.35
+0.1
dia.
–0.05
2.5 dia.
9.5
±0.1
29.2
(31.6)
Note:
1. The terminals connect to JST’s Dipole XA Connector.
5.7
2. The Dipole XA Connector consists of the following components.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
Simulated Roller Lever Models (K)
D3M-01K3
D3M-01K3-3
(7.2)
OF max
RF min.
(see note 2)
Stainless steel (t = 0.3)
19.2
A
12.9
51 gf
6 gf
1.2 mm
0.8 mm
16.2 mm
12.2
±
0.8 mm
OT min.
MD max.
FP max.
OP
3.6
(see note 2)
FP
2.5
2.35
+0.1
7.7
–0.05
OP
10
7
(see note 1)
2.35
+0.1
dia.
–0.05
2.5 dia.
9.5
±0.1
29.2
(31.6)
Note:
1. The terminals connect to JST’s Dipole XA Connector.
5.7
2. The Dipole XA Connector consists of the following components
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
Simulated Roller Lever Models (L)
D3M-01L3
D3M-01L3-3
(7.2)
OF max
RF min.
Stainless steel (t = 0.3)
(see note 2)
102 gf
10 gf
0.7 mm
0.6 mm
13.6 mm
11.3
±
0.6 mm
OT min.
MD max.
FP max.
OP
FP
19.2
2.4
(see note 2)
A
2.5
2.35
+0.1
7.7
–0.05
OP
10
7
(see note 1)
2.35
+0.1
dia.
–0.05
2.5 dia.
9.5
±0.1
29.2
(31.6)
Note:
1. The terminals connect to JST’s Dipole XA Connector.
5.7
2. The Dipole XA Connector consists of the following components.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
60
Subminiature Snap Action Switch
D3M
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■
Correct Use
Mounting
Make sure that the surface to which the D3M is mounted is flat. If the
surface is not flat, the housing may distort, and the D3M may
malfunction, or the housing may crack.
■
Cautions
Handling
To avoid an electric shock or a fire, be sure to turn OFF the D3M
before mounting, removing, wiring, or servicing.
Operating Stroke
Make sure that the dog is separated from the actuator when the actu-
ator is in the free position and that the actuator is pressed appropri-
ately when the D3M is actuated. The actuator must not be pressed
excessively to reach the maximum overtravel position, or the D3M
may be damaged.
Make sure the actuator is pressed in the direction where the D3M is
actuated.
!CAUTION
The voltage and current applied to the D3M must be within the rat-
ed ranges when it is turned ON, turned OFF, and in operation, or
the service life of the D3M may be shortened. Also note that if in-
appropriate voltage and current are applied, the D3M may radiate
heat and burn.
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
Voltage
(V)
30
0.16mA
100mA
24
Operating
range
12
Inoper-
able
range
1mA
0.1
1
10
100mA
1,000
100
Current (mA)
5
0
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Wiring
The terminals connect to JST’s Dipole XA Connector.
The Dipole XA Connector consists of the following components.
Contact: SAX-001T-P0.6
Housing: XAP-02V-1
OMRON does not sell the Dipole XA Connector.
Contact J.S.T. Manufacturing Co. for these connectors.
Subminiature Snap Action Switch
D3M
61
意法半导体-低功耗射频
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
