HMC-T2240
Synthesized Signal Generator, 10 MHz to 40 GHz
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at TE@hittite.com
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
Wide Frequency Range, 10 MHz to 40 GHz Signal Generator!
9
The HMC-T2240 is an easy to implement test equipment solution designed to fulfill your signal
generation needs. Built on a foundation of high quality and market leading Hittite MMICs, the
HMC-T2240 provides the highest output power, lowest harmonic levels and broadest frequency
range amongst signal generators of its size and cost.
This compact and lightweight signal generator also features USB, GPIB and Ethernet
interfaces ensuring carefree integration within various test environments while improving overall
productivity and equipment utilization.
Applications
ATE
Test & Measurement
R&D Laboratories
Advantages
SYNTHESIZED SIGNAL GENERATOR
Versatile: Higher Drive Simplifies Test Set-Ups
Efficient: 500 μs Frequency Switching
Reliable: Incorporates Hittite MMICs
Flexible: Manual or Software Control
Via USB, GPIB or Ethernet
Performance
High Output Power: +29 dBm @ 1 GHz
Wide Frequency Range:
10 MHz to 40 GHz
Excellent Phase Noise Performance:
-96 dBc/Hz @ 10 kHz Offset @ 10 GHz
Spurious Rejection: -65 dBc @ 10 GHz
Power Resolution: 0.1 dB
Frequency Resolution: 1 Hz
9-2
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at TE@hittite.com
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
Frequency
Accuracy: As Per Internal Ref. ±2 ppm
Resolution: 1 Hz
Internal Reference: 10 MHz
Aging Rate: <1 ppm/yr
External Reference Input: 10 MHz (Sine)
Internal Reference Output: 10 MHz (Square Wave)
Output Power Range @ 25°C
40
35
OUTPUT POWER (dBm)
30
25
20
15
10
5
0
9
Output Power
Frequency
(GHz)
0.01
0.1
0.5
1
5
10
15
20
25
30
35
40
(Maximum Leveled)
Power Output (dBm)
26
29
29
29
28
26
25
21
20
22
21
20
0
4
8
12
16
20
24
28
32
36
40
FREQUENCY (GHz)
SSB Phase Noise vs. Frequency
0
-20
10 MHz
1 GHz
5 GHz
10 GHz
15 GHz
20 GHz
25 GHz
30 GHz
40 GHz
SSB PHASE NOISE (dBc/Hz)
-40
-60
-80
-100
-120
-140
-160
1e+1
Minimum Settable: -40 dBm
Dynamic Range: >60 dB
Resolution: 0.1 dB
Power Accuracy: ±1 dB for leveled outputs
1e+2
1e+3
1e+4
1e+5
1e+6
1e+7
FREQUENCY OFFSET (Hz)
Spurious @ 10 dBm Output
< -60 dBc @ Integer Frequencies
< -45 dBc @ Fractional Frequencies
Harmonics
Frequency
(GHz)
0.01
0.05
0.1
0.5
1
2
5
10
15
20
25
2nd
Harmonics
(dBc)
-20
-36
-21
-27
-30
-30
-38
-29
-27
-42
-26
3rd
Harmonics
(dBc)
-36
-41
-31
-38
-49
-52
-56
-55
-44
-
-
SSB Phase Noise (dBc/Hz)
Frequency
(GHz)
0.01
0.10
0.50
1
5
10
15
20
25
30
40
Offset From Carrier
10 Hz
-79
-88
-85
-87
-72
-61
-60
-51
-55
-53
-50
100 Hz
-89
-95
-93
-89
-75
-64
-62
-60
-63
-65
-59
1 kHz
-100
-103
-117
-111
-96
-90
-87
-84
-78
-82
-78
10 kHz 100 kHz 1 MHz 10 MHz
-106
-110
-122
-116
-102
-96
-92
-90
-83
-87
-84
-102
-104
-120
-114
-98
-92
-90
-86
-82
-85
-81
-126
-128
-135
-134
-123
-117
-110
-111
-99
-105
-105
-140
-140
-136
-146
-145
-142
-133
-136
-126
-120
-126
Output Noise: Floor < -155 dBc/Hz
Output Power = +10 dBm
Above data is typical performance at +25°C after 30 minutes of warm-up time unless otherwise stated.
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at TE@hittite.com
9-3
SYNTHESIZED SIGNAL GENERATOR
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
General Specifi cations
9
Power - AC:
100 to 240 VAC @ 50 to 60 Hz
Calibration:
1 Year
Environment
(for indoor use only): 0 to 35 °C
Cooling:
2 Internal Fans
Input / Output:
10 MHz REFOUT
[1]
10 MHz REFIN
[2]
TRIGGER IN
[3]
: TTL
TRIGGER OUT
[3]
: TTL
RS-232 (used for field upgrades)
Ethernet
GPIB
USB 1.1/2.0
RF Output 2.92mm Female
Mechanical Vibration & Shock:
MIL-STD 810 Table 415.5 C-VII
MIL-STD 202 MTD 214 1.5G
Compliance
[4]
:
CSA & CE
General Mechanical Characteristics
H: 76.2 mm (3 in)
W: 203 mm (8 in)
D: 305 mm (12 in)
Weight 3.2 kg (7 lbs)
Warranty:
1 Year Parts and Labor
[1] +10 dBm typ. into 50 Ohms; BNC Connector
[2] -5 dBm min. 50 Ohms; BNC Connector
[3] The trigger input can be driven from either 3.3V or 5V sources for direct interface with TTL signal levels; BNC Connector
[4] Testing in Process
Two Tone Third Order Intercept Test Set-up
SYNTHESIZED SIGNAL GENERATOR
HMC-T2240
I/O
CONTROL
HMC-T2240
Spectrum Analyzer
HMC-T2240
RF
RFIN
DUT
LO
IF
Device Under Test
• Amplifiers
• Mixers & Converters
• Modulators
• RFICs & Subsystems
Efficient Mixer Conversion Loss, Isolation & MxN Spurious Test Set-up
Device Under Test
• Single or Double-Balanced Mixers
• Up/Down Converters
• I/Q Mixers
LO
IF
HMC-T2240
I/O
CONTROL
DUT
HMC-T2240
RF
Spectrum Analyzer
RFIN
9-4
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at TE@hittite.com
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
HMC-T2240 Rear Panel I/O Connections
9
Connectivity & Control
Remote Interface
Hardware:
USB (Windows XP
®
, Windows 7
®
,
Windows Vista
®
Drivers Supplied), GPIB or Ethernet
Software:
LabVIEW 2009 Driver
Frequency Switching Speed:
500 us Typ.
Local Interface
Front Panel Rotary Knob & Display
Windows
®
-
Windows XP
®
,
Windows 7
®
and Windows Vista
®
are
registered trademarks of Microsoft Corporation.
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at TE@hittite.com
9-5
SYNTHESIZED SIGNAL GENERATOR
Its compact size, light weight, fast switching speed and USB,
GBIP and Ethernet control interfaces support the standard
SCPI command set ensuring smooth integration within all test
environments, particularly those associated with automated
test. An installation disk that accompanies each unit includes
all the drivers required to remotely control the device as well as
a user friendly GUI interface (right) compatible with a Windows
XP
®
, Windows 7
®
or Windows Vista
®
operating system. User
control is facilitated via pull down menus that allow program-
ming of single or swept modes in frequency or power. Integra-
tion of multiple units within a production test environment is
easy, and affordable.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
