RN5RT SERIES
8V INPUT LOW SUPPLY CURRENT VOLTAGE REGULATOR
NO.EA-038-130422
OUTLINE
The RN5RT Series are CMOS-based voltage regulator ICs with high output voltage accuracy and low supply
current developed . Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier,
output voltage setting resistors and a current limit circuit. The output voltage of these ICs is fixed with high
accuracy.
The built-in Driver Transistor of low ON Resistance permits developing of low dropout CMOS type regulator as
RN5RT Series. Even if V
OUT
is shorted to GND, the current limit circuit protects the ICs from destruction.
Furthermore, these ICs have a chip enable function, so that the supply current on standby can be minimized.
Since the package for these ICs is the SOT-23-5 (Mini-mold) package, high density mounting of the ICs on
boards is possible.
FEATURES
•
•
•
•
•
•
•
•
•
•
Supply Current ............................................................. Typ. 4μA (except I
CEL
)
Standby Current ........................................................... Typ. 0.1μA
Dropout Voltage ........................................................... Typ. 0.3V (IOUT=60mA, RN5RT30A)
Temperature-Drift Coefficient of Output Voltage .......... Typ. ±100ppm/°C
Line Regulation. ......................................................... Typ. 0.15%/V
Input Voltage Range .................................................... Max. 8.0V
Output Voltage Range.................................................. 2.0V to 6.0V (0.1V steps)
Output Voltage Accuracy.............................................. ±2.0%
Built-in Fold Back Protection Circuit ............................ Typ. 30mA (Current at short mode)
Package ....................................................................... SOT-23-5
APPLICATION
•
Power source for battery-powered equipment.
•
Power source for cellular phones, cameras, VCRs, camcorders, hand-held audio instruments and
hand-held communication equipment.
•
Power source for domestic appliances.
1
RN5RT
ABSOLUTE MAXIMUM RATINGS
Symbol
V
IN
V
CE
V
OUT
I
OUT
P
D
T
opt
T
stg
T
solder
Input Voltage
Input Voltage (
CE
)
Output Voltage
Output Current
Power Dissipation
∗
Item
Rating
9
−0.3
to V
IN
+0.3
−0.3
to V
IN
+0.3
150
420
−40
to 85
−55
to 125
260°C , 10s
Unit
V
V
V
mA
mW
°C
°C
(SOT-23-5)
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering)
∗)
For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
3
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
