3M
™
Pleated Foil I/O Cable Assemblies
MDR Version
• Mates with standard 3M MDR Boardmount Headers
• Pleated copper foil provides a 360 degree shield
Overmolded Assemblies
•
•
•
•
Available in 68, 80 and 100 Positions
Molded-in strain relief
Can utilize either #4-40 or M2.5 thumbscrews
Supplied as a complete assembly only
Metal Shell Assemblies
• Metal shells available in 20, 26, 36, 40, 50, 68, 80 and
100 Positions
• Offer quick release feature on 20 to 68 position for ease
of installation
• 68, 80 and 100 positions available with thumbscrews
• RoHS* compliant
Date Modified: April 12, 2007
TS-0804-08
Sheet 1 of 4
Physical
(Connector)
Technical Specification: See TS-0423 for .050″ Mini D-Ribbon (MDR)
(Cable)
Construction: 0.025″ Pleated Foil Shielded, 30 AWG (solid), TPE Primary
50 Ohm Technical Specifications: See TS-0285 for 90101 - Gray PVC Jacket
See TS-0402 for 90201 - Gray TPE Cover
See TS-0876 for 93101 - Low Skew, Gray PVC Jacket
75 Ohm Technical Specifications: See TS-0451 for 90111 - Gray PVC Jacket
See TS-0598 for 90211 - Gray TPE Cover
(Shells)
Overmolded: 68, 80 and 100 positions, thumbscrews
Glass Reinforced Polyester (PBT) - Gray
Metal: See TS-0655 - 20, 26, 36 and 40 position, latching
See TS-0396 - 50 position, latching
See TS-0355 - 68 position, latching
See TS-0666 - 68, 80 and 100 position, thumbscrew
(Jackscrews)
Material: Steel
Plating: Nickel on #4-40
Zinc Trivalent Black on M2.5
Electrical
Voltage Rating: 30 V
Impedance: See Pleated Foil Cable (PFC) Specifications
Environmental
Temperature Rating:
75°C maximum
*"RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum
concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application
that is exempt under EU RoHS. This information represents 3M's knowledge and belief, which may be based in whole or in part on information
provided by third party suppliers to 3M.
and Buyer’s exclusive
UL File No.: E86982
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liabilityWarranty stated below.
remedy will be in accordance with the
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pleated Foil I/O Cable Assemblies
MDR Version
Overmolded Shell w/ Thumbscrews
Contact Quantity
Dimension A
Dimension B
Dimension C
Dimension D
Assembly Tolerances
Length and Tolerance
<36
″: ±1″
36″ to 120″:
±2″
120″ to 240″:
±4″
>240″:±6″
Minimum Length: 8″
[203
mm]
68
80
100
2.52 [ 64.0 ]
2.81 [ 71.4 ]
3.32 [ 84.3 ]
2.32 [ 58.9 ]
2.61 [ 66.3 ]
3.12 [ 79.2 ]
2.22 [ 56.4 ]
2.58 [ 65.5 ]
3.08 [ 78.2 ]
2.11 [ 53.6 ]
2.41 [ 61.2 ]
2.91 [ 73.9 ]
Overmold Backshell Version
2.05 Max
[ 52.1 ]
1.43
[ 36.3 ]
1.13
[ 28.7 ]
.51
[ 13.0 ]
.36 Min
[ 9.1 ]
(Last) Position “n”
Shim (Optional)
.43
[ 10.9 ]
.08
[ 2.0 ]
A
C
D
B
Position 2
.250
[ 6.35 ]
Position 1
1.72
[ 43.7 ]
Jackscrew Option
4-40 UNC or M2.5
MDR Plug
Pleated Foil
Copper Foil Shield
Overmold Resin
Cable Jacket
In c h
[m m ]
T o le ra n c e U n le s s N o te d
.0
in c h
± .1
.0 0
.0 0 0
± .0 1 ± .0 0 5
[ ] D im e n sio ns fo r R e fe re n ce
O n ly
TS-0804-08
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pleated Foil I/O Cable Assemblies
MDR Version
Metal Shell
Pleated Foil
Assembly Tolerances
Length and Tolerance
<36
″: ±1″
36″ to 120″:
±2″
120″ to 240″:
±4″
>240″:±6″
Minimum Length:
68-100 Position: 8″
[203
mm]
Cable Jacket
Metal Cable Clamp
MDR Plug
Conductive Gasket
Metal Backshell with Thumbscrews Version
Metal Shell with Thumbscrews
Contact
Quantity
Dimension A
68
80
100
2.52 [ 64.0 ]
2.82 [ 71.6 ]
3.32 [ 84.3 ]
1.73
[ 43.9 ]
.52
[ 13.2 ]
.11
[ 2.8 ]
Dim A
Note: There are two connector terminations available for Metal Shell Versions (see ordering information).
1. MS = Standard Connection for GSGSG, with Signals on wires 2, 4, 6, (etc.) places all the Grounds in the lower (Circle) row of the
connector and all the signals in the upper (Triangle) row of the connector.
2. LS = Low Crosstalk Connection for GSGSG, with signals on wires 2, 4, 6, (etc.) places a GSGSG pattern on both the lower (Circle)
and upper (Triangle) rows of the connector.
3. Metal junction shells come with either 2 or 4 screws, see individual tech sheet for details.
TS-0804-08
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pleated Foil I/O Cable Assemblies
MDR Version
Metal Shell with Latches
Contact
Quantity
Dimension B
Dimension C
Dimension D
Metal Backshell with Latching Version
C
D
.08
[ 2.0 ]
20
26
36
40
50
68
1.17 [ 29.7 ]
1.31 [ 33.3 ]
1.57 [ 39.9 ]
1.67 [ 42.4 ]
1.93 [ 49.0 ]
2.37 [ 60.2 ]
1.55 [ 39.4 ]
1.50 [ 38.1 ]
.42 [ 10.7 ]
1.35 [ 34.3 ]
.46 [ 11.7 ]
B
In c h
[m m ]
T o le ra n c e U n le s s N o te d
.0
in c h
± .1
.0 0
.0 0 0
± .0 1 ± .0 0 5
[ ] D im e n sio ns fo r R e fe re n ce
O n ly
Assembly Tolerances
Length and Tolerance
<36
″: ±1″
36″ to 120″:
±2″
120″ to 240″:
±4″
>240″:±6″
Minimum Length:
20-50 Position: 6" [152 mm]
68-100 Position: 8" [203 mm]
Over Molded or Metal Backshell
withThumbscrews
68 - 100 position
Metal Backshell with Latches
20 - 68 position
X
X
Ordering Information
Body Type
OM=Overmold
LS=Metal Shell, Low Crosstalk Connection
MS=Metal Shell, Standard Connection
Cable Impedance and Jacket Type
50
Ω
90101= Thick Jacket
90201= Thin Cover
93101= Thick Jacket, Low Skew
75
Ω
90111= Thick Jacket
90211= Thin Cover
J a Oh
c k m,
et P
, 9 VC
01
01
/X
X
50
O
C h
ov m
er , T
,9 P
02 E
01
/X
50
X
J a Oh
c k m,
et P
L VC
93 ow
10 Sk
1/ ew
X
X ,
75
J a Oh
c k m,
et P
, 9 VC
01
11
/X
X
75
O
C h
ov m
er , T
,9 P
02 E
11
/X
X
50
X
X
X
X
X
X
XX-XXXXXG-XXX-XX-XXX.X
Length in Inches
Minimum lengths, 6" [152 mm] for 20 - 50
position cables,
and 8" [203 mm] for 68 - 100
position cables
Jackscrew
4=4-40 Thread
M=M2.5 Thread
L=Latch
Shim
N=No Shim (Overmold Only)
S=Shim (Overmold Only)
0=Placeholder (metal shell only)
Conductor/
Contact Quantity
( See Table )
TS-0804-08
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product.
Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics
3
Minimum 10%
Post-Consumer Fiber
Printed in USA.
©
All rights reserved.
3M 2007
Microchip MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
