Spansion
®
Analog and Microcontroller
Products
The following document contains information on Spansion analog and microcontroller products. Although the
document is marked with the name “Fujitsu”, the company that originally developed the specification, Spansion
will continue to offer these products to new and existing customers.
Continuity of Specifications
There is no change to this document as a result of offering the device as a Spansion product. Any changes that
have been made are the result of normal document improvements and are noted in the document revision
summary, where supported. Future routine revisions will occur when appropriate, and changes will be noted in a
revision summary.
Continuity of Ordering Part Numbers
Spansion continues to support existing part numbers beginning with “MB”. To order these products, please use
only the Ordering Part Numbers listed in this document.
For More Information
Please contact your local sales office for additional information about Spansion memory, analog, and
microcontroller products and solutions.
FUJITSU MICROELECTRONICS
DATA SHEET
DS07-12555-3E
8-bit Proprietary Microcontroller
CMOS
F MC-8L MB89560A Series
MB89567A/567AC/P568/PV560
■
DESCRIPTION
The MB89560A series has been developed as a general-purpose version of the F
2
MC*-8L family consisting of
proprietary 8-bit, single-chip microcontrollers.
In addition to a compact instruction set, the microcontroller contains a variety of peripheral functions such as I
2
C
interface, timers, 2 ch 8-bit PWM timers, 8/16-bit timer, 21-bit timebase timer, 8-bit PWC timer, 17-bit Watch
prescaler, Watch-dog timer, High speed UART, 8-bit SIO, UART/SIO, LCD controller/driver (optional booster),
Two type Programmable Pulse Generators (PPG), an A/D converter, and external interrupt.
* : F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
2
■
FEATURES
• F
2
MC-8L family CPU core
• Instruction set optimized for controllers:
- Multiplication and division instructions
- 16-bit arithmetic operations
- Test and branch instructions
- Bit manipulation instructions, etc.
• Low-voltage operation (when an A/D converter is not used)
• Low current consumption (applicable to the dual-clock system)
• Minimum execution time: 0.32
μs
at 12.5 MHz /3.5 V to 5.5 V
• Two type of Programmable Pulse Generator (PPG): 6-bit PPG and 12-bit PPG
• I
2
C interface circuit
•Three types of Serial Interface:
- 8-bit Serial I/O (SIO)
- UART/SIO
- High Speed UART (
Transfer rate from 300 bps to 192000 bps /10 MHz main clock)
(Continued)
For the information for microcontroller supports, see the following web site.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2002-2009 FUJITSU MICROELECTRONICS LIMITED All rights reserved
2009.5
MB89560A Series
(Continued)
• I/O ports: Max 50 channels
• 21-bit time-base timer
• 8-bit PWM 2 channels timers
• 8/16-bit timer/counter (8 bits x 2 channels or 16 bits x 1 channel)
• 8-bit PWC timer operation
• Watchdog timer
• 17-bit Watch prescaler
• 10-bit A/D converter: 8 channels
• External interrupt 1: 8 channels
• External interrupt 2 (wake-up function): 4 channels
• LCD controller/driver: 24 segments x 4 commons (Max 96 pixels, duty LCD mode and Static LCD mode)
• LCD booster function (option)
• Wild register (Max 6 different address locations)
• Low-power consumption modes (stop mode, sleep mode, watch mode, and sub clock mode)
• LQFP-80 and QFP-80 package
• CMOS technology
2
DS07-12555-3E
MB89560A Series
■
PRODUCT LINEUP
Part number
MB89567A
Parameter
Classification
ROM size
RAM size
Mass production products
(mask ROM products)
32 K
×
8-bit
(internal mask ROM)
1 K
×
8-bit
Number of instructions
Instruction bit length
Instruction length
Data bit length
Minimum execution time
Minimum interrupt processing time
: 136
: 8-bit
: 1 to 3 bytes
: 1-, 8-, 16-bit
: 0.32
μs/12.5
MHz
: 2.88
μs/12.5
MHz
OTP
48 K
×
8-bit
(internal PROM)
Piggy-back
56 K
×
8-bit
(external ROM)
1 K
×
8-bit
MB89567AC
MB89P568
MB89PV560
CPU functions
Ports
General-purpose I/O ports (N-channel open drain): 20 pins (2 shared with I
2
C inputs,
16 shared with LCD, 2 shared with other
resources)
General-purpose I/O ports (CMOS)
: 30 pins (shared with resources)
Total
: 50 pins
Reset generate cycle: Min 2
21
/F
CH
*
7
for main clock, Min 2
14
/F
CL
*
7
for sub clock
21-bit Interrupt cycle: (2
13
, 2
15
, 2
18
or 2
22
)/F
CH
*
7
8-bit interval timer operation (square wave output capable, operating clock cycle: 1 t
inst
, 8 t
inst
,
16 t
inst
, 64 t
inst
)
8-bit resolution PWM operation (conversion cycle: 128
×
1 t
inst
to 256
×
64 t
inst
)
8/16-bit timer/counter output for counter clock selectability
10-bit resolution
×
8 channels
A/D conversion function (conversion time: 60 t
inst
)
Continuous activation by an 8/16-bit timer/counter output or a timebase timer output capable.
8 independent channels (interrupt vector, request flag, request output enable)
Edge selectability (rising/falling)
Used also for wake-up from stop/sleep mode. (edge detection is also permitted in stop mode.)
4 channels (“L” level interrupts, independent input enable).
Used also for wake-up from stop/sleep mode. (Low-level detection is also permitted in stop
mode.)
8-bit timer operation (count clock cycle: 1 t
inst
, 4 t
inst
, 32 t
inst
)
8-bit reload timer operation (toggle output possible, operating clock cycle: 1 to 32 t
inst
)
8-bit pulse width measurement (continuous measurement possible: H-width, L-width, rising
edge to rising edge, falling edge to falling edge, and rising edge to falling edge)
Can be operated either as a 2-channel 8-bit timer/counter (Timer 1 and Timer 2, each with its
own independent operating clock cycle), or as one 16-bit timer/counter
In Timer 1 or 16-bit timer/counter operation, event counter operation (external clock-triggered)
and square wave output capable
(Continued)
Watchdog timer
21-bit time-base
timer
8-bit PWM 2 ch
timer
10-bit A/D
converter *
2
External interrupt
1 (wake-up
function)
External interrupt
2 (wake-up
function)
PWC timer
8/16-bit timer/
counter
DS07-12555-3E
3
MB89560A Series
(Continued)
Part number
MB89567A
Parameter
Watch prescaler
6-bit PPG
12-bit PPG
I
2
C interface*
4
8-bit serial I/O
17-bit
Interrupt cycle: 31.25 ms, 0.25 s, 0.50 s, 1.00 s, 2.00 s, 4.00 s/32.768 kHz for subclock
Internal 6-bit counter
Pulse width and cycle are program selectable
Internal 12-bit counter
Pulse width and cycle are program selectable
Not
Available
1 channel
MB89567AC
MB89P568
MB89PV560
8-bit, LSB first/MSB first selectability
Transfer clocks (one external shift clock, three internal shift clocks: 2 t
inst
, 8 t
inst
, 32 t
inst
) *
5
Transfer data length: 7-, 8-bit for UART, 8-bit for SIO
Transfer rate (1201 bps to 78125 bps / 10 MHz main clock)
support sub-clock mode
UART/SIO
Transfer data length: 4-, 6-, 7-, 8-bit
High speed UART Transfer rate (300 bps to 192000 bps /9.216 MHz main clock)
support sub-clock mode
Common output: 4 (Max)
Segment output: 24 (Max)
LCD driving power (bias) pins: 4
LCD display RAM size: 12 bytes (24 × 4 bits, Max 96 pixels)
Duty LCD mode and Static LCD mode
Booster for LCD driving: option*
1
Dividing resistor for LCD driving: option
Maximum of 6-byte data can be assigned in 6 different address.
Used to replace any data in the ROM when specific address and data are assigned in Wild
register.
Wild register can be set up by using different communication methods through the device.
Sub clock mode, sleep mode, stop mode and watch mode
CMOS
2.2 V to 5.5 V
2.7 V to 5.5 V
2.7 V to 5.5 V*
3
LCD
Wild register
Standby mode
Process
Operating voltage *
6
*1 : When booster is used, the bias is reduced by 1/3. It can be selected by mask option.
*2 : Voltage varies with product.
*3 : When external ROM is used, EPROM: MBM27C512-20 should be used, the operating voltage: 4.5 V to 5.5 V.
*4 : I
2
C is complied to Intel Corp. System Management Bus Rev. 1.0 specification and to the Philips I
2
C specification.
*5 : 1 t
inst
= one instruction cycle (execution time) which can be selected as 1/4, 1/8, 1/16, or 1/64 of main clock
if main clock mode is selected, or 1/2 of the subclock if subclock mode is selected.
*6 : Varies with conditions such as the operating frequency. (See “■ ELECTRICAL CHARACTERISTICS”.)
*7 : F
CH
: main clock source oscillation, F
CL
: sub clock source oscillation
4
DS07-12555-3E
ARM技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
