REVISION BA
DO NOT
SCALE FROM
THIS PRINT
QTH-XXX-XX-X-D-XXX
No OF POSITIONS
-030, -060, -090,
*-120, *-150
(PER ROW)
* (SEE NOTE 11)
LEAD STYLE
-01: .1680[4.267]
-02: .2861[7.264]
-03: .4043[10.269]
-04: .6001[15.246]
-05: .7181[18.240]
-06: .8361[21.237]
-07: .9542[24.237]
-08: 1.1511[29.238]
-09: .5224[13.269]
-10: .5618[14.269]
= SEE TABLE 4
PLATING SPECIFICATION
-F: FLASH SELECTIVE GOLD WITH MATTE TIN TAILS
(USE T-1SXX-XX-F & T-1GXX-XX-F)
(SEE NOTE 7)
-L: LIGHT SELECTIVE GOLD WITH MATTE TIN TAILS
(USE T-1SXX-XX-L & T-1GXX-XX-L)
-H: HEAVY GOLD WITH FLASH GOLD TAILS
(USE T-1SXX-XX-H & T-1GXX-XX-G)
-C: ELECTRO-POLISHED SELECTIVE
(USE T-1SXX-XX-C, T-1GXX-XX-L)
ROW SPECIFICATION
-D: DOUBLE (USE QTH-30-XX-D-XX
& QTHH-30-XX-D-XX)
OPTION
-LC: LOCKING CLIPS
(USE LC-08-TM-01)
-A: ALIGNMENT PINS
(USE QTH-30-XX-D-XX-A FOR -01 & -02)
(FOR -03 THRU -10 SEE TABLE 4)
-K: POLYIMIDE FILM (USE K-DOT-.276-.375-.005)
(AVAILABLE ON -01 THRU -04, -09 & -10 ONLY)
(SEE FIG 2, SHEET 2)
-TR: TAPE & REEL (90 POS MAX)
(60 POS MAX W/ -GP OPTION)
(N/A ON -05 THRU -08)
-GP: GUIDE POSTS
(AVAILABLE ON -01 & -02 ONLY)
(USE QTH-30-XX-D-XX-X-GP)
(SEE FIG 7, SHEET 4)
-FL: FRICTION LOCKS (SEE FIG 8, SHEET 4)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION OPTION (SEE FIG 9, SHEET 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
(USE QTH-30-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
**-L: LATCHING OPTION (SEE FIG 10, SHT 6)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(USE **QTH-30-01-D-XX-L)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
**NOT TOOLED
(No OF POSITIONS / 30) x .7875[20.003]
.788 20.0 REF
.235 5.97
REF
.155 3.9 REF
(SEE NOTE 12)
02
.047 1.19 REF
29 EQ SPACES @
.0197[.500]
01
C3
.644 16.4 REF
.008 0.2 REF
QTH-090-01-X-D-LC SHOWN
"A"
FIG 1
QTH-30-XX-D-XX
T-1SXX-XX-X
(SEE TABLE 1)
C2
"A"
.003[.08]
C1
.002[.03]
(SEE NOTE 5 & 8)
.055 1.40
"B" REF
SEE TABLE 2
(SEE NOTE 8)
.098 2.49 REF
(SEE NOTE 10)
.038 1.0 REF
.280 7.11 REF
"A"
.010 0.3 REF
2 MAX SWAY
(TYP)
.745 18.9 REF
T-1G1-XX-X
LC-08-TM-01
.015 0.4 REF
.037 0.9 REF
-LC: LOCKING CLIP OPTION SHOWN
QTH-30-XX-D-XX-A
SECTION "A"-"A"
.037 0.95
REF
.038 1.0 REF
R
.035 0.89
REF
((No OF POSITIONS / 30) x .7875[20.003]) - .060[1.52] REF
-A: ALIGNMENT PIN OPTION
[STYLE -01 & -02]
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 6 OZ FOR –01 & -02, 8 OZ FOR –03 THRU –10.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002[.05]. APPLIES TO SIGNAL OR GROUNDS
INDEPENDENT OF THE GROUND OR SIGNAL PINS RESPECTIVELY.
6. LEAD STYLES -03 THRU -10: TOP BODY (QTH) CANNOT HAVE -A OPTION.
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
8. GROUND PLANE PRESS HEIGHT MUST BE .003 [.07] LESS THAN THE MAXIMUM HEIGHT
OR .002[.03] GREATER THAN THE MINIMUM HEIGHT OF SIGNAL PIN.
9. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
10. CUT OFF BURR NOT TO EXCEED .003 [.07] IN ANY DIRECTION, BURR PLUS TAB
HEIGHT NOT TO EXCEED .006 [.15].
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC
INTERCONNECT PROCESSING GROUP.
12. MINIMUM ROW TO ROW IS .152, PIN CAN EXTEND PAST WALL .003 MAX.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
MATERIAL:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.571429
DESCRIPTION:
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
INSULATOR: LCP, COLOR: BLACK, FLAMMABILITY RATING: UL94VO
TERMINAL & GROUND PLANE: PHOS BRONZE
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
DWG. NO.
QTH-XXX-XX-X-D-XXX
09-14-2010
SHEET
1
OF
6
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
BY:
DEAN P
REVISION BA
NOTE: "R" = (No OF POSITIONS / 30) x .7875[20.003]
WITH -RT1 OPTION: "R" = ((No OF POSITIONS / 30) x .7875[20.003] + .6505[16.522] REF
WITH -GP OPTION: "R" = ((No OF POSITIONS / 30) x .7875[20.003] + .5175[13.145] REF
"S" = (("R" - .276[7.01]) / 2) .020[.51]
"R" REF
"S"
.020 0.51
"T"
.276 7.01
FIG 2
-K: POLYIMIDE FILM PAD OPTION
[USE K-DOT-.276-.375-.005]
QTHH-30-XX-D-XX-A
QTH-30-02-D-XX (SEE NOTE 6)
FIG 3
-A: ALIGNMENT PIN OPTION
(QTH-090-05-X-D-A SHOWN)
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1]
(STYLES -03 THRU -09, SEE TABLE 4)
.038 1.0
REF
.035 0.89 REF
(No OF POSITIONS / 30) x .7875[20.003] - .060[1.52] REF
.053 1.3
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.75:1
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
DWG. NO.
QTH-XXX-XX-X-D-XXX
09-14-2010
SHEET
2
OF
6
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
BY:
DEAN P
REVISION BA
BA
DETAIL 'H'
SCALE 8 : 1
.003 0.08 MAX TAB HEIGHT
.006 0.15 MAX BURR
+ TAB HEIGHT
"B"
T-1G1-XX-X
QTH-30-02-D-XX (SEE NOTE 6)
T-1S60-XX-X
.278 7.07 REF
'H'
SEE TABLE 2
(SEE NOTE 8)
SHEET 1
.037 0.94 REF
+.003[.08]
C6
.118 3.00 REF
.010 0.25 REF
2 MAX SWAY
(TYP)
"B"
QTHH-30-01-D-XX
.055 1.40
"C"
-.001[.03]
(SEE NOTE 5 & 8)
SHEET 1
(SEE NOTE 10)
.053 1.33 REF
.281 7.14 REF
.265 6.73 REF
FIG 4
SECTION "B"-"B"
(QTH-090-03-X-D-LC SHOWN)
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1]
T-1S60-XX-X
"D"
T-1S61-XX-X
"C"
C4
"C"
.001[.03]
(SEE TABLE 4)
[SEE NOTE 5
& 8- SHEET 1]
SEE TABLE 2
(SEE NOTE 8)
SHEET 1
T-1G1-XX-X
(SEE NOTE 10)
.003[.08]
C5
"C"
.001[.03]
(SEE TABLE 4)
[SEE NOTE 5
& 8- SHEET 1]
SEE TABLE 2
(SEE NOTE 8)
SHEET 1
T-1G17-XX-X
(SEE NOTE 10)
.003[.08]
"C"
.432 10.97
REF
QTHH-30-03-D-XX
.600 15.24
REF
QTHH-030-04-D-XX
"D"
(QTH-090-05-X-D SHOWN)
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3]
FIG 5
SECTION "C"-"C"
SCALE 1.25 : 1
(QTH-090-07-X-D SHOWN)
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 6
SECTION "D"-"D"
SCALE 1.25 : 1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.571429
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
QTH-XXX-XX-X-D-XXX
09-14-2010
SHEET
3
OF
6
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
BY:
DEAN P
REVISION BA
FIG 7
(QTH-090-01-X-D-GP SHOWN)
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1]
(AVAILABLE ON -01 & -02 ONLY)
((No OF POS / 30) x .7875[20.003]) + .5175[13.145] REF
"D"
.295 7.49
REF
C
L
SEE TABLE 5
((No OF POS / 30) x .7875[20.003]) + .225[5.72] REF
.125 3.18 REF
FIG 8
-FL: FRICTION LOCKS
(NOT AVAILABLE WITH -GP OPTION)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
.008 0.20
REF
.015 0.38 REF
.015 0.38 REF
.070 1.78 REF (TYP)
DETAIL 'E'
SCALE 12 : 1
.012 0.30
REF
DETAIL 'F'
SCALE 12 : 1
QTH-30-XX-D-XX-X-FL
'E'
'F'
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
QTH-XXX-XX-X-D-XXX
09-14-2010
SHEET
4
OF
6
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
BY:
DEAN P
REVISION BA
FIG 9
(QTH-090-01-X-D-A-RT1 SHOWN)
[NOT AVAILABLE WITH -LC, -GP, OR -FL OPTIONS]
(AVAILABLE ON -01 ONLY)
C
L
C7
QTH-30-01-D-XX-X-RT1
((No OF POS / 30) x .7875[20.003]) + .6505[16.522] REF
((No OF POS / 30) x .7875[20.003]) + .3415[8.674] .004
'G'
.069 1.76
REF
.062 1.57 REF
C8
.190 4.83
.100 2.54 REF
.070 1.78
T-1R36-01-F (2 PLCS)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DETAIL 'G'
SCALE 4.5 : 1
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
QTH-XXX-XX-X-D-XXX
09-14-2010
SHEET
5
OF
6
BY:
DEAN P
消费电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
