Ideal for use as a buffer amplifier minimizing interaction of adjacent circuits
Minimizes external components, component count and circuit area.
Amplifier can be used at low voltage such as +3V or standard +5V.
+5V operation results in higher P1dB and OIP3.
Tiny footprint saves space in dense layouts while providing low inductance, repeatable
transitions, and excellent thermal contact to the PCB.
3 x 3mm 8-lead MCLP package
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
Page 1 of 5
High Directivity
Monolithic Amplifier
Product Features
• Choice of supply voltage, 2.8V to 5V
• Micro-miniature size .120”X.120”
• Internal DC blocking at RF input and output
• High directivity, 15-22 dB typ.
• Low noise figure, 3.1 dB typ. at 2 GHz
• Output power, up to +14 dBm typ.
• Aqueous washable
0.5-2.5 GHz
MNA-5A+
CASE STYLE: DQ849
Typical Applications
• Buffer amplifier
• Cellular
• PCN
• Communications satellite
• Defense
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
General Description
MNA-5A+ is a wideband PHEMT based MMIC amplifier with high active Directivity. MNA integrates the entire
matching network and majority of the bias circuit inside the package, reducing the need for complicated exter-
nal circuits. This approach makes the MNA amplifier extremely straightforward to use. This design operates
on a single 2.8 to 5V supply, is well matched for 50Ω and comes in a tiny, low profile 3x3mm 8-lead MCLP
DC Bias pads 7,8. Pad 7 connected to ground via 1000 pF. Pad 8 connected to pad 7 via 33 ohms.
Not Connected, connect pad 3 and 4 to ground externally
Ground
Notes
1,6
No
stated in this specification document are intended to be excluded and do not form
A.
Performance
OPTIONAL
and quality attributes and conditions not expressly
internal connection; recommended use: per PCB Layout PL-078
a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
REV. OR
M154121
MNA-5A+
RS/CP
160318
Page 2 of 5
Monolithic MMIC Amplifier
Electrical Specifications
1
at 25°C
Parameter
Frequency Range
Gain
MNA-5A+
Condition (GHz)
0.5
0.75
1.0
1.5
2.0
2.5
0.5
0.75
1.0
1.5
2.0
2.5
0.5
0.75
1.0
1.5
2.0
2.5
0.5
0.75
1.0
1.5
2.0
2.5
0.5
0.75
1.0
1.5
2.0
2.5
0.5
0.75
1.0
1.5
2.0
2.5
0.5
0.75
1.0
1.5
2.0
2.5
Vs=5V
Min.
0.5
—
—
—
—
19.1
—
Typ.
21.6
23.3
23.5
22.8
21.3
19.2
5.4
10.4
14.9
21.4
21.6
17.1
14.5
15.4
12.8
11.6
12.2
12.8
12.6
12.1
11.1
10.4
9.6
8.7
23.8
23.8
22.3
21.3
20.1
19.1
3.2
3.3
3.0
3.0
3.1
3.2
20.3
20.9
19.7
17.4
16.6
17.3
34
15
0.0004
3
64
Max.
2.5
—
—
—
—
23.4
—
Vs=2.8V
Typ.
0.5-2.5
20.5
21.9
21.9
21.0
19.4
17.4
5.6
10.8
15.3
20.8
21.1
17.2
14.4
23.1
17.4
15.3
15.3
15.7
11.0
10.8
10.1
9.4
8.4
7.5
21.8
21.7
20.6
19.6
18.5
17.5
3.3
3.2
3.0
3.1
3.2
3.2
22.5
21.5
19.3
16.9
16.2
16.6
31.8
5
0.0014
4
64
Units
GHz
dB
Input Return Loss
dB
Output Return Loss
dB
Output Power at P1dB
dBm
Output IP3
dBm
Noise Figure
dB
Directivity
(Isolation-Gain)
dB
DC Current
Device Current Variation vs. Temperature
(2)
Device Current Variation vs Voltage
Thermal resitance at 85°C
1.
2.
3.
4.
—
43
mA
μA/°C
mA/mV
°C/W
Measured on Mini-Circuits Characterization test board TB-186+. See Characterization Test Circuit (Fig. 1)
(Current at 85°C -Current at -45°C)/130
(Current at 5.25V-Current at 3.9V)/1.35
(Current at 3.9V-Current at 2.66V)/1.24
Absolute Maximum Ratings
5
Parameter
Operating Temperature
Storage Temperature
DC Voltage
Power Dissipation
Input Power
Ratings
-40°C to 85°C
-55°C to 100°C
7V at pad 7 (on TB-186+)
1V at pads 2 & 5
700 mW
5 dBm (continuous operation)
28 dBm (5 minutes max)
5. Permanent damage may occur if any of these limits are exceeded.
Notes
These ratings are
and conditions not expressly
normal operation
A.
Performance and quality attributes
not intended for continuous
stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
Page 3 of 5
Monolithic MMIC Amplifier
Characterization & Application Test Circuit
-
MNA-5A+
Fig 1.
Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-313)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A
PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, -5dBm/tone at output.
Recommended Application Circuit
Fig 2.
Test Board includes case, connectors, and components soldered to PCB
Product Marking
MCL
MN5A
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
Page 4 of 5
Monolithic MMIC Amplifier
Additional Detailed Technical Information
MNA-5A+
here
additional information is available on our dash board. To access this information
click
Data Table
Performance Data
Swept Graphs
S-Parameter (S2P Files) Data Set
(.zip file)
Case Style
Tape & Reel
Standard quantities available on reel
DQ849 3x3x0.9 mm MCLP
Plastic package, exposed paddle
lead finish: tin-silver over nickel
F104
7” reels with 20, 50, 100, 200, 500, 1K, or 2K devices
Suggested Layout for PCB Design
Evaluation Board
Environmental Ratings
PL-078
TB-186-5A+
ENV08T1
ESD Rating
Human Body Model (HBM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (>25V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
Start
Visual
Inspection
Electrical Test
SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test
SAM Analysis
Finish
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
Notes
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
please visit Mini-Circuits’ website
this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
B.
Electrical specifications and performance data contained in
at www.minicircuits.com/MCLStore/terms.jsp
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
For healthcare professionals, accurate diagnosis and treatment are crucial for a clear picture of a person's health. However, healthcare professionals often rely on tests at medical facilities, cli...[详细]
SMT贴片机是表面贴装技术（Surface Mount Technology）中的重要设备，它的性能状态对电子制造的质量和效率有着决定性的影响。因此，对SMT贴片机的主要指标性能进行定期检测非常重要。以下是一些主要的检测项目： 定位精度：定位精度是SMT贴片机的核心性能指标，它直接影响到贴片的准确性。通常，我们通过重复测量贴片机在X、Y轴上的移动误差来检测其定位精度。 贴片速度：贴片速度...[详细]
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
