MAXQ610 USER’S GUIDE
MAXQ610
16-BIT MAXQ
RISC CPU
4KB ROM
CLOCK
GPIO
16-BIT TIMER
WATCHDOG
16-BIT TIMER
SECURE MMU
64KB FLASH
2KB SRAM
8kHz NANO
RING
IR DRIVER
IR TIMER
SPI
USART0
USART1
REGULATOR
VOLTAGE
MONITOR
Functional Diagrams
Pin Configurations appear at end of data sheet.
Functional Diagrams continued at end of data sheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
Rev 2; 7/10
MAXQ610 User’s Guide
TABLE OF CONTENTS
SECTION 1: Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
SECTION 2: Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
SECTION 3: Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
SECTION 4: System Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
SECTION 5: Peripheral Register Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
SECTION 6: General-Purpose I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
SECTION 7: Timer/Counter Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
SECTION 8: IR Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
SECTION 9: Serial I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1
SECTION 10: Serial Peripheral Interface (SPI) Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1
SECTION 11: Test Access Port (TAP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-1
SECTION 12: In-Circuit Debug Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-1
SECTION 13: In-System Programming (JTAG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1
SECTION 14: MAXQ610 Instruction Set Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-1
SECTION 15: Utility ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-1
REVISION HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-1
ii
MAXQ610 User’s Guide
SECTION 1: OVERVIEW
The MAXQ
M
family of 16-bit reduced instruction set computing (RISC) microcontrollers is targeted towards low-cost,
low-power embedded application designs . The flexible, modular architecture design used in these microcontrollers
allows development of targeted designs for specific applications with minimal effort .
1.1 Instruction Set
The MAXQ610 microcontroller uses an instruction set where all instructions are fixed in length (16 bits) . A register-
based, transport-triggered architecture allows all instructions to be coded as simple transfer operations . All instruc-
tions reduce to either writing an immediate value to a destination register or memory location or moving data between
registers and/or memory locations .
This simple top-level instruction decoding allows all instructions to be executed in a single cycle . Because all CPU
operations are performed on registers only, any new functionality can be added by simply adding new register mod-
ules . The simple instruction set also provides maximum flexibility for code optimization by a compiler .
1.2 Harvard Memory Architecture
Program memory, data memory, and register space on the MAXQ610 are separate from one another and are each
accessed by a separate bus . This type of memory architecture (known as Harvard architecture) has some advantages .
First, the word lengths can be different for different types of memory . Program memory must be 16 bits wide to accom-
modate the instruction word size, but system and peripheral registers can be 8 bits wide or 16 bits wide as needed .
Because data memory is not required to store program code, its width can also vary and could conceivably be targeted
for a specific application .
Also, because data memory is accessed by the CPU only through appropriate registers, it is possible for register
modules to access memory entirely independent from the main processor, providing the framework for direct memory
access operations . It is also possible to have more than one type of data memory, each accessed through a different
register set .
1.3 Register Set
Because all functions in the MAXQ610 family are accessed through registers, common functionality is provided through
a common register set . Many of these registers provide the equivalent of higher level op codes, by directly accessing
the ALU, the loop counter registers, and the data pointer registers . Others, such as the interrupt registers, provide
common control and configuration functions that are equivalent across the MAXQ610 family of microcontrollers .
The common register set, also known as the system registers, includes the following:
• Arithmetic logic unit (ALU) access and control registers, including working accumulator registers and the processor
status flags
• Two data pointers and a frame pointer for data memory access
• Autodecrementing loop counters for fast, compact looping
• Instruction pointer and other branching control access points
• Stack pointer and an access point to the 16-bit-wide soft stack
• Interrupt vector table and priority registers
• One code pointer for quick program memory access as data
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
1-1
MAXQ610 User’s Guide
Peripheral registers (module 0 to module 5) on the MAXQ610 contain registers that are used to access the peripher-
als, including:
• General-purpose I/O ports
• External interrupts
• Timers/counters
• USART ports
• Serial peripheral interface (SPI™) port
SPI is a trademark of Motorola, Inc.
1-2
MAXQ610 User’s Guide
SECTION 2: ARCHITECTURE
This section contains the following information:
2 .1 Instruction Decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
2 .2 Register Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
2 .3 Memory Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
2 .3 .1 Program Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
2 .3 .2 Utility ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
2 .3 .3 Data Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
2 .3 .4 Stack Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
2 .4 Memory Management Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
2 .5 Memory Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
2 .5 .1 Memory Mapping Into Data Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
2 .5 .2 Memory Mapping into Code Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12
2 .5 .3 Memory Mapping Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12
2 .6 Memory Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13
2 .6 .1 Rules for System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14
2 .6 .2 Privilege Exception Interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-15
2 .6 .3 Memory Access Protection Impact on Data Pointers (and Code Pointer) . . . . . . . . . . . . . . . . . . . . . . . . .2-15
2 .6 .4 Debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17
2 .6 .5 Enabling Memory Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17
2 .6 .6 Reset Procedure and Setup of Memory Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17
2 .6 .7 Loader Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18
2 .6 .8 Disabling MAXQ610-Specific Memory Access Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-20
2 .6 .9 No User-Loader Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-21
2 .7 Clock Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22
2 .7 .1 External Clock (Crystal/Resonator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23
2 .7 .2 External Clock (Direct Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23
2 .7 .3 Internal System Clock Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24
2 .8 Wake-Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24
2 .8 .1 Using the Wake-Up Timer to Exit Stop Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24
2 .9 Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24
2 .9 .1 Servicing Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24
2 .9 .2 Interrupt System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25
2 .9 .3 Synchronous vs . Asynchronous Interrupt Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25
2 .9 .4 Interrupt Prioritization by Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26
2 .9 .5 Interrupt Exception Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27
2 .10 Operating Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27
2 .11 Reset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27
2 .11 .1 Power-On/Power-Fail Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28
2-1
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
