Scotchlok
™
Terminals
MV18BC, MV14BC, MV10BC
Butt Connector, Vinyl Insulated, Seamless
L
Data Sheet
Product
Number
MV18BC
MV14BC
MV10BC
Wire
Range
(AWG)
22-18
16-14
12-10
L
(in.)
1.02
1.02
1.20
Barrel
Length
0.28
0.30
0.38
Barrel
I.D.
0.062
0.095
0.142
Maximum
Insulation
Diameter
0.125
0.155
0.218
Thickness
0.031
0.031
0.038
Installation Information
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. 22.2
NO. 0, 65
3M FILE NO. LR22190
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 486C
3M FILE NO. E23438
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Specifications
Wire Size:
Barrel Seam:
Insulator Max. Volt. Rating:
Maximum Operating Temp:
Maximum Current:
Insulator Material:
Terminal Material:
Terminal Plating:
See Table Above
Seamless
600 V Building Wire
1000 V Signs or
Fixtures (Luminaires)
221˚F (105˚C)
Same as Wire
Vinyl
ETP Copper
Tin
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style) or
TR-490 (ratchet style) hand tools.
Barrel Crimp (Electrical)
Engineering Specification
Crimp-type connectors shall, electrically and mechanical-
ly, connect permanently to the pre-stripped ends of two
stranded copper wires.
The connector line shall offer barrel variations in wire
(AWG) size (22-18, 16-14, 12-10). and construction
(non-insulated brazed seam, vinyl insulated butted seam,
nylon insulated seamless, etc...). The connector line shall
have regulatory agency coverage (UL Listing, CSA
Certification). The connectors shall be marked with the
wire range and manufacturer’s symbol ( ).
The Vinyl Insulated, Seamless Butt Connector shall be
tin-plated, annealed copper, having a double-length,
round seamless barrel, with a center stop and a close fit-
ting vinyl tube covering, color coded and sized for a
specified (AWG) wire range (22-18, 16-14, 12-10).
Insulated connectors shall be UL Listed and CSA
Certified for 600 volts maximum, building wire: 1000
volts maximum, signs or fixtures and temperature rated
221˚F (105˚C) maximum.
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture as of the date of
purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8125-9664-7-A
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
