REVISION Q
Pb
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
HPSTP-XX-XXXX-XX-XX
No OF POSITIONS
-19: (5 SIG PAIRS/4 POWER LINES)
USES HDMIP-19 (SEE FIG. 1)
-29: (8 SIG PAIRS/6 POWER LINES)
USES HDMIP-29 (SEE FIG. 2)
LENGTH *
(IN MILLIMETERS)
-0500 - 9999
*CONTACT SAMTEC FOR CUSTOM
LENGTHS.
-1000, 2000, 3000, AND 5000 IN STOCK
LENGTHS LONGER THAN 5000 NOT
SUPPORTED BY TEST DATA
SECOND END
-S: STANDARD PLUG
AVAILABLE FIRST END:
(19 AND 29 POSITION)
-S: STANDARD PLUG
FIRST END
-M: MINI PLUG
**
-S: STANDARD PLUG
-M: MINI PLUG
AVAILABLE SECOND END:
AVAILABLE FIRST END:
(19 AND 29 POSITION)
(19 POSITION ONLY)
-STANDARD PLUG
-M: MINI PLUG
-M: MINI PLUG
-SL: LOCKING STANDARD PLUG
AVAILABLE SECOND END:
AVAILABLE FIRST END:
(19 POSITION ONLY)
(19 POSITION ONLY)
-M: MINI PLUG
-SL: LOCKING SECOND PLUG
** -S: STANDARD PLUG
-ML: LATCHING MINI PLUG
-SL: LOCKING STANDARD PLUG
AVAILABLE FIRST END
AVAILABLE SECOND END:
(19 POSITION ONLY)
(19 POSITION ONLY)
-ML: LATCHING MINI PLUG
-SL: LOCKING SECOND PLUG
-ML: LATCHING MINI PLUG
AVAILABLE SECOND END
(19 POSITION ONLY)
-ML: LATCHING MINI PLUG
** = NOT RELEASED FOR PRODUCTION
"D" REF
(SEE TABLE 1)
2
DO NOT
SCALE FROM
THIS PRINT
18
C2
"E" REF (TYP)
1
HDRL-11
(SEE NOTE 11)
19
"A"
(SEE TABLE 1)
"F" REF (TYP)
HPSTP-19-XXXX-S-S SHOWN
LENGTH 1%
(SEE CALLOUT)
FIG. 1
LABEL-ET
(SEE NOTE 3)
C1
1
2
4.45 .175 REF.
"C" REF.
1.
C
REPRESENTS A CRITICAL DIMENSION.
(SEE TABLE 1)
C4
2. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED.
C3
3. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
4. WRAP ENDS IN BUBBLE WRAP AND PACKAGE IN CLEAR POLY BAGS.
5. SEE TABLE 2, 3, 4, & 5 FOR SIGNAL/GROUND/POWER CONFIGURATION.
C5
6. CONNECTOR SHEILD TIED TO BRAIDED CABLE SHIELD.
7. GOLD SHALL BE .000030" MIN GOLD PER MIL-G-45204B, CLASS 1, TO BE MEASURED IN CONTACT AREA.
8. NICKEL SHALL BE .000080" MIN PER QQ-N-290, CLASS 1, MEASURED ON SHELL.
9. NOTE DELETED.
10. NOTE DELETED.
11. HDRL-11 IS TO BE CENTERED ON CABLE AS SHOWN.
HDRL-11 IS TO CONTAIN: PART NUMBER, SHOP ORDER,
& DATE CODE.
UNLESS OTHERWISE
DECIMALS
NOTES:
STPC-XX-02-XXXX
SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
.X: .3 [.01]
.XX: .13 [.005]
.XXX: .051 [.002]
ANGLES
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
OVERMOLD: PVC (UL94 V-0)
PREMOLD: PE (UL94 V-0)
CONNECTOR: LCP (UL94 V-0)
CABLE: (VW-1)
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
HDMI SHIELDED TWISTED PAIR CABLE ASSY
DWG. NO.
DESCRIPTION:
BY:
John Riley 2/23/2006
HPSTP-XX-XXXX-XX-XX
SHEET
1
OF
7
REVISION Q
2
1
FIG. 2 HPSTP-29-XXXX-S-S SHOWN
FIG. 3 HPSTP-19-XXXX-SL-SL SHOWN
02
01
28
29
LENGTH 1%
(SEE PART CALLOUT)
30.84 1.214
REF (TYP)
10.42 .410 REF
18
19
6.50 .256
01
19
OVERMOLD
14.00 .551 MAX
SUB-MHDMC-19-X
5.25 .207
'B'
'C'
2.62 .103 REF
DETAIL 'A'
J1
J2
0.45 .018 REF
8.40 .331 MAX
2.42 .095 REF
HPSTP-19-XXXX-ML-ML SHOWN
(SHIELDED TWISTED PAIR ONLY)
FIG. 4
'A'
(LATCHING OPTION ONLY)
DETAIL 'C'
(NON-LATCHING)
DETAIL 'B'
19
18
5.25 .207
01
20.3[.799] .045 REF
J2
02
(HPSTP-19-XXXX-M-M SHOWN)
(LATCHING)
DETAIL 'B
'
HPSTP-19-XXXX-M-S SHOWN
(SAME AS FIG. 1 AND FIG. 4, DIFFERENT AS SHOWN)
(SHIELDED TWISTED PAIR ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG. 5
10.9[.429] .045 REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
HDMI SHIELDED TWISTED PAIR CABLE ASSY
DWG. NO.
DESCRIPTION:
(HPSTP-19-XXXX-ML-ML SHOWN)
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
HPSTP-XX-XXXX-XX-XX
SHEET
2
OF
7
BY:
John Riley 2/23/2006
REVISION Q
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
HDMI SHIELDED TWISTED PAIR CABLE ASSY
HPSTP-XX-XXXX-XX-XX
SHEET
3
OF
7
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
BY:
John Riley 2/23/2006
REVISION Q
SUB-HDMIP-XX-01
2
1
COPPER FOIL
STPC-XX-02-XXXX
COPPER FOIL
SUB-HDMIP-XX-01
"A"
(SEE TABLE 1)
C1
C2
18
19
ASSEMBLY LENGTH ±1%
1
2:1 SCALE
FOR CLARITY
FIG 1. HPSTP-19-XXXX-01 SHOWN
(-S-S OPTION ONLY)
2:1 SCALE
FOR CLARITY
"L" (REF)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
HDMI SHIELDED TWISTED PAIR CABLE ASSY
HPSTP-XX-XXXX-XX-XX
SHEET
4
OF
7
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
BY:
John Riley 2/23/2006
HPSTP-XX-XXXX-XX-XX
REVISION Q
19.00 .748
19.05 .750
1.40 .055
3.60 .142
JACKET
BRAID SHIELD
TWISTED PAIR SHIELD
DIELECTRIC
INNER CONDUCTOR
STRIP DIMS
SUB-HDMIP-XX-01
02
01
STPC-XX-02-XXXX
HEAT SHRINK TUBE (TYP)
(AFTER SHRINKING)
SUB-HDMIP-XX-01
'D'
19
18
PIN 1
18
19
SOLDER TERMINATE CABLE TO PC BOARDS
CABLE LENGTH =
ASSEMBLY LENGTH - 36.5mm[1.44in] ±1%
ASSEMBLY LENGTH ±1%
01
PIN 1
02
FIRST END
IN-PROCESS - STEP 1
SECOND END
HEAT SHRINK TUBE
(USE HST-0.078-02-BLK)
6.00 .236
(HPSTP-19-XXXX-S-S SHOWN)
A) SLIDE 6MM HEAT SHRINK TUBE OVER PAIRS AND CONDUCTORS
B) SOLDER CABLE TO PCB
C) PUSH H/S TUBE UP TO PCB AND ACTIVATE (SEE DETAIL)
EPOXY REGION
KEEP EPOXY WITHIN PAD AREA
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
HEAT SHRINK DETAIL
DETAIL 'D'
SCALE 2 : 1
4.00 .157
IN-PROCESS - STEP 2
(HPSTP-19-XXXX-S-S SHOWN)
A) APPLY EPOXY
B) TRIM BRAID TO 4MM WIDE TAILS ON THIS SIDE ONLY
(DO NOT TRIM LENGTH)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
HDMI SHIELDED TWISTED PAIR CABLE ASSY
SHEET SCALE: 1:2
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
HPSTP-XX-XXXX-XX-XX
11/7/07
SHEET
5
OF
7
BY:
John Riley
汽车电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
