JOG-01038
OKI
Electronics Components
Preliminary
OL5416L-2
Rev. 2 [6. 2003]
Transmitter optical sub-assembly for SFP/SFF
1.DESCRIPTION
The OL5416L-2 consists of a1.55µm MQW-DFB laser diode, a monitor PD, a single-mode
fiber-stub, a split sleeve for the optical connector with
φ
1.25 mm ferrule
and a coaxial package.
This module is a transmitter optical sub-assembly for 1.25Gbit/s transmission with high power at high
temperature.
2. FEATURES
•
•
•
•
•
•
Fiber output power: Pf=2.2mW
Multi-quantum-well (MQW) DFB structure
Includes monitor PD for power control
Coaxial Package
Wide operation range: Ta=0 to +85
°C
Side mode suppression: 32dB
3. APPLICATION
•
Giga bit ether
Drawing No: JOG-01038
OL5416L-2
-1-
Oki Electric Industry Co., Ltd.
JOG-01038
OKI
Electronics Components
OL5416L-2
4.OPTICAL AND ELECTRICAL CHARACTERISTICS
(Ta = 0 to +85°C, unless otherwise specified)
Test Conditions
Min. Typ.
Max.
Unit
CW
2.2
mW
Ta=+25°C,CW
7
15
Ta=+85°C,CW,BOL
40
mA
Ta=+85°C,CW,EOL
Operation Current
Slope efficiency
Modulation Current
Peak Wavelength
Spectral Wideth
Side-mode suppression ratio
LD Forward Voltage
Rise/Fall times
Monitor Current
Photodiode Dark Current
Photodiode Capacitance
Tracking Error
Connector repetability
Iop
η
Imod
λ
p
∆λ
SMSR
Vf
Tr/Tf
Im
Id
Ct
TRE
-
Pf=2.2mW,CW,Ta=+25°C
Pf=2.2mW,CW
Pf=2.2mW,CW,Ta=+25°C
Pf=2.2mW,CW,Ta=+25°C
Pf= 2.2mW,CW
Pf=2.2mW,CW, -20dB
Pf=2.2mW,CW
Pf=2.2mW,CW,Ta=+25°C
Pf=2.2mW,CW
P
ave
=1.1
mW,20-80%,Ext=9dB
Pf=2.2mW,CW
VRD=1.5V,Ta=+25°C
VRD=1.5V,Ta=+25°C
VRD=1.5V,
f=1MHz,Ta=+25°C
(RT to WCT)
master pigtail
1500
32
1.3
1.6
0.15
120
2200
20
10
-1
-0.5
+1
+0.5
34.5
110
0.08
27.5
40
1580
0.5
1.5*Ith-
BOL
Parameter
Fiber Output Power
Threshold Current
Symbol
Pf
Ith
mA
W/A
mA
nm
nm
dB
V
ns
µ
A
nA
pF
dB
dB
5.ABSOLUTE MAXIMUM RATING
(Ta = +25°C, unless otherwise specified)
Rating
Unit
5
mW
2
V
10
mA
2
mA
30
V
0 to +85
°
C
-40 to +85
°
C
260
°
C
Drawing No: JOG-01038
OL5416L-2
-2-
Parameter
Fiber Output Power
LD Reverse Voltage
Monitor PD Forward Current
Monitor PD Reverse Current
Monitor PD Reverse Voltage
Operating Ambient Temperature (T a)
Storage Temperature
Lead Soldering Temperature (10s)
Symbol
Pf
V
R
I
F
I
R
V
R
Ta
Tstg
-
Oki Electric Industry Co., Ltd.
JOG-01038
OKI
Electronics Components
OL5416L-2
7. SAFETY INFORMATION ON THIS PRODUCT
A laser beam is emitted from this laser diode during operation.
The invisible or visible laser beam, directly or indirectly, may cause injury to
Laser Beam the eye
or loss of eyesight.
Do not look directly into the laser beam.
Avoid exposure to the laser beam, any reflected or collimated beam.
Caution
The product contains gallium arsenide, GaAs.
GaAs vapor and powder are hazardous to human health if inhaled, ingested or
GaAs
swallowed.
Product
Do not destory or burn the product.
Do not crush or chemically dissolve the product.
Do not put the product in the mouth.
Observe related laws and company regulations when discarding this product.
The product should be excluded from general industrial waste or household
garbage.
Caution
A glass-fiber is attached on the product. Handle with care.
Optical Fiber When the fiber is broken or damaged, handle carefully to avoid injury from
the damaged part or fragments.
All specifications described herein are subject to change without notice.
Warning
Drawing No: JOG-01038
OL5416L-2
-4-
Oki Electric Industry Co., Ltd.
JOG-01038
OKI
Electronics Components
OL5416L-2
Notice
1.
The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information b eing referred to is up-to-date.
The outline of action and examples for application circuits described herein have been chosen as an
explanation for the standard action and performance of the product. When planning to use the product, please
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.
When designing your product, please use our product below the specified maximum ratings and within the
specified operating ranges including, but not limited to , operating voltage, power dissipation, and operating
temperature.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation
resulting from misuse, neglect, improper installation, repair, alteration or acc ident, improper handling, or
unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified
maximum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party’ industrial and intellectual property right, etc. is
s
granted by us in connection with the use of the product and/or the information and drawings contained herein.
No responsibility is assumed by us for any infringement of a third party’ righ t which may result from the use
s
thereof.
The products listed in this document are intended for use in general electronics equipment for commercial
applications (e.g., office automation, communication equipment, measurement equipment, consumer
electronics, etc.). These products are not authorized for use in any system or application that requires special
or enhanced quality and reliability characteristics nor in any system or application where the failure of such
system or application may result in the l oss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace
equipment, nuclear power control, medical equipment, and life-support systems.
Certain products in this document may need government approval before they can be exported to particular
countries. The purchaser assumes the responsibility of determining the legality of export of these products and
will take appropriate and necessary steps at t heir own expense for these.
No part of the contents contained herein may be reprinted or reproduced without our prior permission.
2.
3.
4.
5.
6.
7.
8.
Sales Support
JAPAN/ASIA
Oki Electric Industry Co., Ltd.
550-1, Higashiasakawa-cho, Hachioji-shi, Tokyo 193-8550
Phone: +81-426-62-6646
INTERNET:
http://www.oki.com
AMERICA
Oki Optical Components
785 North Mary Avenue, Sunnyvale, CA 94086
Phone: +1-408-737-6379 Fax: +1-408-737-6579
INTERNET:
http://www.okioptical.com
EUROPE
Oki Electric Europe GmbH
D-41460 Neuss, Germany
Phone: +49-2131-15960 Fax: +49-2131-103539
INTERNET:
http://www.oki-europe.de
Copyright 2003 Oki Electric Industry Co., Ltd
Drawing No: JOG-01038
OL5416L-2
-5-
Oki Electric Industry Co., Ltd.
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
