SENSITRON_________
SEMICONDUCTOR
Technical Data
Datasheet 5066, Rev. A
SHB601031E
Silicon Carbide Single Phase Full Wave Bridge
DESCRIPTION:
600-VOLT, 4 AMP POWER SILICON CARBIDE SINGLE PHASE FULL WAVE BRIDGE IN
A HERMETIC 5-LEAD TO-258 (MO-078) PACKAGE
FEATURES:
•
NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
•
NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
MAXIMUM RATINGS
RATING
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (With T
C
= 65
O
C) WHEN USED AS
A BRIDGE
MAXIMUM REPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine) per leg, T
C
= 25
O
C
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
(t = 10μs, pulse) per leg, T
C
= 25
O
C
MAXIMUM POWER DISSIPATION, T
C
= 25
O
C
MAXIMUM THERMAL RESISTANCE, Junction to Case (Connected as a
BRIDGE)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE*
ALL RATINGS ARE @ T
C
= 25
°C
UNLESS OTHERWISE SPECIFIED.
SYMBOL
PIV
I
O
I
FRM
I
FSM
P
d
R
θJC
Top, Tstg
MAX.
600
8
20
110
20
3.0
-55 to
+200
UNITS
Volts
Amps
Amps
Amps
W
°C/W
°C
*
Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device
above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C.
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE (I
f
= 4A PER LEG)
V
f
T
J
=25
°C
T
J
=150
°C
MAXIMUM REVERSE CURRENT (600V PIV PER LEG) I
r
JUNCTION CAPACITANCE (V
r
=5V) per leg
T
J
= 25
°C
T
J
= 150
°C
C
J
TYP
1.55
2.05
0.03
0.05
220
10
N/A
MAX.
1.90
2.45
0.20
0.50
mA
pF
nC
Volts
UNITS
TOTAL CAPACITANCE CHARGE (V
R
=600V, I
F
=4A, di/dt=500A/μs and
T
J
=25°C) Q
C
per leg
•
221 WEST INDUSTRY COURT
•
DEER PARK, NY 11729-4681
•
PHONE (631) 586-7600
•
FAX (631) 242-9798
•
•
World Wide Web - http://www.sensitron.com
•
E-mail Address - sales@sensitron.com
•
SHB601031E
SENSITRON
Technical Data
Datasheet 5066, REV. A
MECHANICAL DIMENSIONS (inches)
MO-078
PINOUT TABLE
DEVICE TYPE
SINGLE PHASE FULL WAVE BRIDGE
PIN 1
DC(+)
PIN 2
DC(-)
PIN 3
NC
PIN 4
AC(1)
PIN 5
AC(2)
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
•
221 WEST INDUSTRY COURT
•
DEER PARK, NY 11729-4681
•
PHONE (631) 586-7600
•
FAX (631) 242-9798
•
•
World Wide Web - http://www.sensitron.com
•
E-mail Address - sales@sensitron.com
•
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
