Plug & Play™ Universal Std-Loss MTP
®
/
MT-RJ Hybrid Extender Trunk, 62.5 µm
Multimode (OM1)
Plug & Play™ Universal Systems extender trunks are
used to distribute portions, or all, of the fibers in a Plug
& Play Universal systems trunk to other areas in the
infrastructure. For example, a high-fiber-count trunk can
be deployed from a main distribution area (MDA) to a
zone distribution area (ZDA). Lower-fiber-count extender
trunks can then be utilized to distribute fiber from the
ZDAs into cabinets.
Hybrid extender trunks are terminated with MTP
®
Connectors on one end of the trunk and LC or SC
connectors on the other end for applications requiring
one end of the trunk to connect directly into system
equipment or patch panels. Both Plug & Play Universal
Systems trunks and extender trunks are available in hy-
brid connector options.
Additional product configurations are available.
Please download the family specification sheet to
view all options.
MTP
®
(pinned) to MT-RJ (pinned), 96 F, 24-in MTP legs and 36-in
MT-RJ legs, pulling grip one side, 100 ft
Features and Benefits
Factory-terminated solutions
Provide consistent quality, ensure system performance,
and reduce installation time
Universal-wired modular system components
Enable moves, adds and changes without polarity con-
cerns; provide a simple migration path between 2-fiber
and parallel optics applications
Maximum skew of 0.75 ns
Product is assured to work in parallel optic applications
for Ethernet, Fiber Channel and InfiniBand
Protective pulling grips
Protects both ends of assembly during installation
Standards
Approvals and Listings
Design and Test Criteria
National Electrical Code
®
(NEC
®
) OFNP, CSA FT-6
NFPA 262 (for plenum, riser
and general building appli-
cations)
Product Specification A708696KPNALZ100F_NAFTA_AEN
Page 1 | Revision date 2016-02-12
Plug & Play™ Universal Std-Loss MTP
®
/
MT-RJ Hybrid Extender Trunk, 62.5 µm
Multimode (OM1)
Specifications
General Specifications
Application
Flame Rating
Fiber Category
Cable Assembly Type
Cable Type
Number of Pulling Grips
Data Center LAN/SAN
Plenum (OFNP)
62.5 µm MM (OM1)
MTP
®
(pinned) to MT-RJ (pinned), 96 F, 24-in MTP legs and 36-in
MT-RJ legs, pulling grip one side, 100 ft
Plug & Play™ Extender Trunk
Indoor; ANSI/ICEA S-83-596
1
Temperature Range
Operation
-10 °C to 60 °C (14 °F to 140 °F)
Design - Connector A
Connector Type
Ferrule Material
MTP
®
(pinned)
Composite
Optical Specifications - Connector A
Reflectance, Typical
Insertion Loss, Max.
< -20 dB
0.5 dB
Design - Connector B
Connector Type
Ferrule Material
MT-RJ (pinned)
Composite
Optical Specifications - Connector B
Reflectance, Typical
Insertion Loss, Max.
< -20 dB
.5 dB
Product Specification A708696KPNALZ100F_NAFTA_AEN
Page 2 | Revision date 2016-02-12
Plug & Play™ Universal Std-Loss MTP
®
/
MT-RJ Hybrid Extender Trunk, 62.5 µm
Multimode (OM1)
Cable Design
Fiber Count
Outer Jacket Color
Polarity
96
Orange
MTP
®
(pinned) to MT-RJ (pinned), 96 F, 24-in MTP legs and 36-in
MT-RJ legs, pulling grip one side, 100 ft
Universal; TIA-568 Type-C
Mechanical Characteristics Cable
Nominal Outer Diameter
Min. Bend Radius Installation
Min. Bend Radius Operation
Max. Tensile Strength for Installation
Weight
11.9 mm ± 0.3 mm (0.47 in (± 0.01 in))
178.5 mm (7 in)
59.5 mm (2.3 in)
660 N
109 kg/km (240 lb/1000 ft)
Optical Characteristics (cabled)
Fiber Compliance
Wavelengths
Maximum Attenuation
Min. Overfilled Launch (OFL) Bandwidth
Minimum Effective Modal Bandwidth (EMB)
Serial 1 Gigabit Ethernet
Serial 10 Gigabit Ethernet
Induced Attenuation @ 15 mm Radius
Skew
IEC 60793-2-10, ITU-G.651.1
850 nm / 1300 nm
3.4 dB/km / 1.0 dB/km
200 MHz*km / 500 MHz*km
220 MHz*km / -
300 m / 550 m
33 m / -
< 1.0 dB (2 turns; 15 mm radius; 850 nm)
< 0.75 ns @ 300 m
Furcation - Connector A
Leg Length
Leg Color
Leg Diameter
Furcation Type - A
610 mm [Shortest Leg = (+76 mm/-0 mm), Others Vary] (24 in
[Shortest Leg = (+3 in/-0 in), Others Vary])
Orange
2.0 mm
Heat-shrink for U-Clip
Furcation - Connector B
Leg Length
Leg Color
914 mm [Shortest Leg = (+76 mm/-0 mm), Others Vary] (36 in
[Shortest Leg = (+3 in/-0 in), Others Vary])
Orange
Product Specification A708696KPNALZ100F_NAFTA_AEN
Page 3 | Revision date 2016-02-12
Plug & Play™ Universal Std-Loss MTP
®
/
MT-RJ Hybrid Extender Trunk, 62.5 µm
Multimode (OM1)
Furcation - Connector B
Leg Diameter
Furcation Type - B
2.0 mm
PnP Size 2
MTP
®
(pinned) to MT-RJ (pinned), 96 F, 24-in MTP legs and 36-in
MT-RJ legs, pulling grip one side, 100 ft
Pulling Grip - Connector A
Pulling Grip - Connector A
Pulling Grip Outer Diameter
Min. Duct Size Diameter
Tensile Strength
Yes
26 mm (1 in)
38.1 mm (1.5 in)
1320 N (300 lb)
Pulling Grip - Connector B
Pulling Grip - Connector B
No
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Fiber Specifications
Optical Characteristics (cabled)
Fiber Core Diameter
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
Maximum Attenuation
Serial 1 Gigabit Ethernet
Serial 10 Gigabit Ethernet
Min. Overfilled Launch (OFL) Bandwidth
Minimum Effective Modal Bandwidth (EMB)
62.5 µm
OM1
K
30
850 nm / 1300 nm
3.4 dB/km / 1.0 dB/km
300 m / 550 m
33 m / -
200 MHz*km / 500 MHz*km
220 MHz*km / -
Product Specification A708696KPNALZ100F_NAFTA_AEN
Page 4 | Revision date 2016-02-12
Plug & Play™ Universal Std-Loss MTP
®
/
MT-RJ Hybrid Extender Trunk, 62.5 µm
Multimode (OM1)
Ordering Information
Part Number
Product Description
EAN Code
Length
Weight
MTP
®
(pinned) to MT-RJ (pinned), 96 F, 24-in MTP legs and 36-in
MT-RJ legs, pulling grip one side, 100 ft
A708696KPNALZ100F
Plug & Play™ Universal Std-Loss MTP
®
/MT-RJ Hybrid
Extender Trunk, 62.5 µm Multimode (OM1), MTP (pinned) to
MT-RJ (pinned), 96 F, 24-in MTP legs and 36-in MT-RJ legs,
pulling grip one side, 100 ft
4056418640952
100 ft (+10.5 ft/-0 ft) (30 m (+3.20 m/-0 m))
24.0 lb (10.9 kg)
Shipping Information
Units per Delivery
1/1
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.
All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.
© 2016 Corning Optical Communications. All rights reserved.
Product Specification A708696KPNALZ100F_NAFTA_AEN
Page 5 | Revision date 2016-02-12
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
