PRELIMINARY DATASHEET
|
AUG, 2006
Model 755MM-M Optical Transmitter
1550 nm, 10 km, High SBS Suppression
Ortel’s Model 755MM-M is a recently developed 1550 nm transmitter
suitable for link lengths of up to 10Km. The 75Ω
RF video input
supports frequencies up to 870 MHz. A 50Ω RF input supports
frequencies up to 2200 MHz for FTTP, L-Band satellite, and wireless
applications.
Also integrated into the RF/Optical design are Ortel’s low chirp control
and noise suppression circuitry. Integrated within the design is Ortel’s
patented pre distortion technology to provide outstanding performance
with any of Ortel’s wide range of cooled broadband lasers. These
modules have optional dual redundant power supplies and SNMP
capability.
It features Ortel’s proprietary Enhanced Optical Spectrum Reshaping
Technology with extremely high SBS suppression performance, making
it ideal for either FTTP or HFC network applications. The performance
specifications indicated below are subject to change.
Applications
Video signal distribution to
HFC CATV and FTTP nodes
Video overlay in passive
optical networks (PON)
Replacement for Externally
Modulated Transmitters
Features
Enhanced Optical Spectrum
Reshaping Technology
Optimized RF integration of
predistorter, amplifiers and
laser
Dual redundant power
supplies
Supports SNMP protocol
Complete, efficient laser bias
and TEC control circuitry
OEM/ODM opportunities
available through Ortel
Digital monitoring and control
ITU Wavelengths
Performance Highlights
Parameter
Operating Temperature Range
Wavelength (Multiple Options)
Optical Power
Frequency Response
CNR
CSO
CTB
SBS Suppression Capability
RF Input Return Loss
Optical Return Loss
Min
0
1530
7
47
950
47
-
-
-
16
40
Typ
25
-
-
-
-
48
-
-
-
-
-
Max
50
1560
-
870
2200
-
-60
-65
17
Unit
°C
nm
dBm
MHz
MHz
dB
dBc
dBc
dBm
dB
dB
-
-
Noise and distortion performance above assume 79 channel NTSC loading with no QAM, -5 dBm
received optical power. See following pages for complete specifications and operating/test
conditions.
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.emcore.com.
755MM-M 1550 nm Transmitter
PRELIMINARY DATASHEET-
AUG, 2006
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in
excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect device reliability.
Parameter
Operating Temperature Range
Storage Case Temperature Range
RF Input Level
Symbol
T
OP
T
stg
-
Min.
0
-20
-
Max.
50
65
2
Unit
°
C
°
C
dBm
RF Characteristics
Parameter
Bandwidth
Frequency Response
RF Input Level with AGC
CNR
2
CSO
CTB
2
2
Condition
-
45-870 MHz
950-2200 MHz
-
-
-
-
45 – 870 MHz RF Input
950-2200 MHz RF Input
45 to 870 MHz
45 to 870 MHz
950 to 2700 MHz
Min
47
-
-
-10
47
-
-
-
-
16
16
10
Typ
-
-
-
-8
48
-
-
75
50
-
-
-
Max
2200
1.5
3.5
-6
-
-60
-65
-
-
-
-
-
1
Unit
MHz
dB
p-p
dB
p-p
dBm
dB
dBc
dBc
Ohms
Ohms
dB
dB
dB
Input Impedance
75Ω Video Input Return Loss
75Ω Test Port Input Return Loss
50Ω Input Return Loss
1.Excludes tilt component.
2.CW carriers, 79 channel NTSC channel plan, 4 MHz noise bandwidth, -5 dBm received power, SMF-28 or equivalent.
Optical Characteristics
Parameter
Optical Output Power
SBS Threshold
Side Mode Suppression Ratio
Optical Return Loss
1
RIN
Condition
-
20 km SMF-28
-
APC style connector
Back to Back
Min
-
-
35
40
Typ
7
-
40
-
-160
Max
-
17
-
-
Unit
dBm
dBm
dB
dB
dBc/Hz
1. In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at least 55 dB for discrete
reflections and 30 dB for distributed reflections
2 of 5
755MM-M 1550 nm Transmitter
PRELIMINARY DATASHEET-
AUG, 2006
Laser Safety Information
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH
Class IIIb laser product. This device has been classified with the FDA/CDRH under accession number 0220800.
Single-mode bulkhead receptacles with internal SC/APC connectors (standard).
Wavelength = 1.5
μm.
Maximum power = 30 mW.
Product is shipped with internal AC/DC and DC/DC power supply converters.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
©
Copyright 2003. EMCORE Corporation
EMCORE Corporation
2015 W. Chestnut Street
Alhambra, CA 91803-1542
Phone: 626-293-3400
Fax: 626-293-3428
www.emcore.com
5 of 5
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
