Optical Encoders
SerieS 60C
Multi-Function Joystick
FeATUreS
• Three-in-One Joystick, Optical Encoder and Pushbutton
• Compact Packaging
• Choices of Cable Length and Termination
• Customized Solutions Available
APPLiCATiONS
• Avionics
• Medical Equipment
• Automotive Navigation, Information & Entertainment Equipment
DiMeNSiONS
in inches (and millimeters)
Unless otherwise specified, standard tolerance are:
Linear ± .025
Diameter ± .010
Angle ± 2.0°
JOYSTiCK OPerATiON
eNCODer WAVeFOrM
Optical and Mechanical
Encoders
TrUTH TABLe
Standard Quadrature 2-Bit Code
JOYSTiCK
eNCODer
FrONT MOUNTiNG
reAr MOUNTiNG
SWiTCH SCHeMATiC
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Optical Encoders
CONTrOL KNOBS
inner Knob
P/N 607702
.695
Ø1.150
Ø.505
Ø1.344
Outter Knob
P/N 607703
.487 ±.002
.585
.080
SPeCiFiCATiONS
rotary
electrical and Mechanical ratings
Operating Voltage:
5.00 ± 0.25 Vdc
Supply Current:
35mA TYP at 5 Vdc
Power Consumption:
175mW TYP at 5Vdc
Output:
Direct output from inverting Schmitt
trigger
Output Code:
2-Bit quadrature, channel A
leads channel B by 90° in cw rotation
Logic Output Characteristics:
High: No less than 3.5 Vdc
Low: No greater than 1.0 Vdc
Mechanical Life:
500K rotational cycles
(through all positions and a full return)
rotational Torque:
medium torque option
3.00+2.00 in-oz, torque shall be within 50% of
initial value throughout life
Mounting Torque:
15 in-lbs. maximum
Shaft Push/Pull Out Force:
25 lbs minimum
Terminal Strength:
15 lbs terminal minimum
Pushbutton
electrical and Mechanical ratings
rating:
10 mA at 5 Vdc resistive
Contact resistance:
less than 10 ohms
Contact Bounce:
< 4ms make, 10 ms break
Mechanical Life:
500K actuations minimum
Actuation Force:
option 7 = 485 ± 115grams
Pushbutton Travel:
0.033 ± 0.015 inches to
contact; 0.075 inches maximum
environmental ratings
Joystick
electrical and Mechanical ratings
Operating Voltage:
5.00 ± 0.25 Vdc
Supply Current:
35mA at TYP at 5 Vdc
Power Consumption:
175mW TYP at 5Vdc
Output:
Direct output from inverting Schmitt
trigger
Logic Output Characteristics:
High: No less than 3.5 Vdc
Low: No greater than 1.0 Vdc
Mechanical Life:
500K cycles
(through all positions and a full return)
Angle of Throw:
8° max. in all directions
Operating Temperature range:
-40°C to
85°C
Storage Temperature range:
-55°C to
100°C
relative Humidity:
96 hours at 90-95%
humidity at 40°C
Vibration:
Harmonic motion with amplitude of
15g, within a varied 10 to 2000 Hz
Mechanical Shock:
Test 1: 100g for 6ms half-sine wave with a
velocity change of 12.3 ft/s
Test 2: 100g for 6ms sawtooth wave with a
velocity change of 9.7 ft/s
Thermocycle:
4 hours cycling between
-40°C to 85°C
Materials and Finishes
Slider Plate:
Thermoplastic
Backplate:
Thermplastic
Lightpipe, Joystick:
Thermoplastic
Lightpipe, 16 pos:
Thermoplastic
Centering Profile:
Thermoplastic
Shaft inner:
Aluminum
Pins:
Stainless steel
Barbed rivet:
Stainless steel
Detent Balls:
Carbon steel 100 with nickel
finish
Centering Balls:
Carbon steel 100 with nickel
finish
Detent Springs:
Tinned music wire
Centering Springs:
Tinned music wire
Cable ASM:
.050 round conductor flat cable,
PVC coated. Conductors are stranded, top-
coated wire
Solder:
95.5% SN, 4% AG, 0.5% CU
Dome:
Stainless steel
PCB 16 Pos:
NEMA grade FR-4. Plating is
gold or palladium over nickel
infrared emitter:
Gallium aluminum arsenide
Phototransistor:
Planar silicon
resistor:
Carbon film
Schmitt Trigger:
RoHS Compliant TSSOP,
14 pin
Lubricating Grease:
Nyogel 774L
Label:
TT406 Thermal transfer cast film
Optical and Mechanical
Encoders
Bushing:
Thermoplastic
Shaft Outer:
Thermoplastic
Upper Housing:
Thermoplastic
Pushbutton rocker:
Thermoplastic
Pushbutton Actuator:
Thermoplastic
inner Shaft Slide:
Thermoplastic
OPTiONS
Contact Grayhill for custom terminations,
rotational torque, number of positions, shaft
configurations, and resolutions. Control knobs
are also available.
OrDeriNG iNFOrMATiON
Series
Angle of Throw:
22= 22.5° or 16 positions
rotation Torque:
M= Medium torque
Pushbutton:
7= 485 grams
Joystick:
4= Four directions
60C22-M7-4-060S
Termination:
0.050" center ribbon cable with; C= Connector*; S= 0.1" stripped end
Cable Length:
025 thru 250 in 1/2 inch increments, 060= 6.0 inch cable
* AMP p/n 1-215083-0. Mating connector is p/n 1-215079-0 for thru-hole or p/n 1-188275-0 for surface mount.
Available from your local Grayhill Distributor. For prices and discounts, contact a local sales office, an authorized distributor, or Grayhill.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
