REVISION H
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
2. ALL ASSEMBLIES TO BE 100 % ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
3. ALL ASSEMBLIES TO BE 100 % HI-POT TESTED AT 630V.
4. TO BE MEASURED FROM SCORE LINE.
5. PARTS TO BE LAYER PACKAGED.
6. SI DATA AVAILABLE FOR STANDARD LENGTHS ONLY.
7. MAX CABLE LENGTH AVAILABLE WITHOUT FLAT.
RIBBONIZED SECTION IA 18.61 INCHES. CONTACT
SAMTEC FOR NUMBER OF FLAT SECTIONS IF LONGER
LENGTH IS REQUIRED.
8.
FOR BOM INFORMATION SEE FFMD-XX-01-X OR
FFSD-XX-01-N PRINT.
9.
WHEN CUTTING CABLE TO LENGTH, CONDUCTORS
SHOULD NOT EXTEND PAST THE CABLE INSULATION,
EXTENDING LESS THAN 25% OF CABLE THICKNESS ON
CONSECUTIVE AND LESS THAN 50% OF THE CABLE
THICKNESS ON NON-CONSECUTIVE STRANDS IS
CONSIDERED A PROCESS INDICATOR.
C
FMTP-XX-X-XX.XX-01-X-X-XX
No OF POSITIONS
-02- THRU -25
OPTION
-R: REVERSED CONNECTOR
(SEE FIG 3 & FIG 4, SHEET 2)
STANDARD POLARIZATION NOTCH
-N: NOTCH
(ONLY AVAILABLE ON -T)
(SEE FIG 2 & FIG 4, SHEET 2)
PLATING OPTIONS
LEAVE BLANK FOR STANDARD
(USE T-1S57-01-T AND C-67-L)
-F: FLASH SELECTIVE GOLD
(USE T-1S57-01-F AND C-67-F)
-S: SELECTIVE GOLD
(USE T-1S57-01-S AND C-67-S)
LEAD STYLE
C
C
DO NOT
SCALE FROM
THIS PRINT
END ASSEMBLY
-D: DOUBLE END (SEE FIGS 1&3)
-T: TRANSFER END (SEE FIGS 2&4)
-D: DOUBLE END
FIG 1
FMTP-10-D-3.85-01-X
ASSEMBLY LENGTH
ONLY AVAILABLE IN THESE LENGTHS
03.85" (USE CBTP-68-30-7/38-025-2)
08.77" (USE CBTP-68-30-7/38-025-1)
18.00" (USE CBTP-68-30-7/38-025-4)
NOTCH DENOTES
FIRST POSITION
RED WIRE TO SIDE
OF 1ST POS INDICATOR
.250
- .050
(TYP)
(SEE NOTE 4)
SCORE LINE
+.150
"XX.XX"±.225
C
.120
REF
.010 MAX
CABLE OVERHANG
(NO POS x .050) + .165
REF
FFMD-XX-01-X
(SEE NOTE 8)
SCALE 2:1
DETAIL 'A'
SCALE 2 : 1
'A'
C
.200±.010
(NO POS x .050) + .165
REF
'B'
FMTP-10-T-3.85-01-X-N
(SAME AS FIG 1 EXCEPT AS SHOWN)
-T: TRANSFER END
FIG 2
.200
+.006
- .003
C
DETAIL 'B'
SCALE 2 : 1
-R
FIG 3
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
FFSD-XX-01-N
(SEE NOTE 8)
REVERSED CONNECTOR
FMTP-10-D-X.XX-01-X-R
(SAME AS FIG 1 EXCEPT AS SHOWN)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
REVERSED CONNECTOR
INSULATOR: CELANEX 3314, COLOR: BLACK
CONTACT OR TERMINAL: PHOS BRONZE
CABLE: TWISTED PAIR
F:\DWG\MISC\MKTG\FMTP-XX-X-XX.XX-01-X-X-XX-MKT.SLDDRW
.050 X .050 C/L TWISTED PAIR MALE IDC ASSEMBLY
BY:
LENNY K
FMTP-XX-X-XX.XX-01-X-X-XX
3/16/07
SHEET
1
OF
2
REVISION H
-T: TRANSFER END (REVERSED)
FIG 4
FMTP-10-T-8.77-01-X-N-R
(SAME AS FIG. 2 EXCEPT AS SHOWN)
IN PROCESS
"XX.XX"±.225
C
+.150
C
.250
- .100
(SEE NOTE 4)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
.050 X .050 C/L TWISTED PAIR MALE IDC ASSEMBLY
F:\DWG\MISC\MKTG\FMTP-XX-X-XX.XX-01-X-X-XX-MKT.SLDDRW
BY:
LENNY K
FMTP-XX-X-XX.XX-01-X-X-XX
3/16/07
SHEET
2
OF
2
MicroPython开源版块
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
