Integrated Modules
VOA-MUX/DMUX Modules
VOA-MUX/DMUX (VMUX) Modules are passive modules for
multiplexing and demultiplexing up to eight bands or 100 GHz
channels with integrated power equalization. VMUX modules
independently equalize power levels in each channel or band
using DiCon's MEMS Attenuator (VOA) and integrated (PIN)
photodiodes. VMUXes are a low cost alternative to external
Dynamic Gain Equalizers.
Features
•
•
•
•
Multi-Channel MUX/DMUX with power monitoring and level control
Upgradeable in groups of 4 bands or 100 GHz channels
Ideal for metro and long haul applications
Optional upgrade ports
Applications
VMUX Modules are ideally suited for all MUX applications which
require per band or per channel power equalization. For MUX
applications, they provide pre-emphasis after terminal equipment
transmitters. For DMUX applications they provide optical level
automatic gain control in front of terminal equipment receivers.
VMUX Modules can also be used to equalize the Add side of
OADMs.
U.S. patented. Specifications subject to change. Copyright ©2002 DiCon Fiberoptics, Inc. All rights reserved.
Integrated Modules
Optical Specifications
Passband
1
Insertion loss
C - P1
C - P4
C - P8
Adjacent channel isolation
3
Directivity
Attenuation Range
Temperature dependence
4
Fast ripple
5
Polarization dependent loss
Polarization mode dispersion
Back-reflection
Optical power
Response speed
Repeatability
Wear-out
Attenuation slope
Monotonicity
Fiber type
Fiber jacket
Operating temperature
Storage temperature
1.
2.
3.
4.
5.
2
Ordering Information
V-
MUX Type
D
M
4
8
N
Z
N
Z
FC
FC/APC
SC
SC/APC
LC
N
1
X
DMUX
MUX
4 channels or bands
8 channels or bands
1
0.2 nm min.
2.0 dB at CWL, 2.4 dB max.
3.8 dB typ., 4.2 dB max
5.2 dB typ., 5.8 dB max.
28 dB min.
45 dB min.
15 dB min.
+/ - 0.15 dB max.
0.1 dB max.
0.15 dB max.
0.1 ps max.
-55 dB max.
300 mW max.
2 ms max.
0.1 dB max.
1 x 10
7
cycles min.
20 dB/V max.
0 dB/V min.
9/125 Corning SMF-28
250 micron, 200 kpsi bare fiber
0
0
C to +65
0
C
-40
o
C to +85
o
C
-
-
-
-
-
Number of Channels
P1 ITU Channel #
Specify ITU channel #
Custom band
1
PN ITU Channel #
Specify ITU channel #
Custom band
FC/SPC
FC/APC
SC/SPC
SC/APC
LC/UPC
None
1 meter
Specify X meters
Connector Type
Pigtail Length
1. Based on ITU grid
VOA resistance
1
VOA capacitance
1
VOA power consumption
1
Photodiode dark current
2
Photodiode bias voltage
Photodiode linearity
Photodiode shunt resistance
2
Photodiode capacitance
2
1. Per VOA, 4 or 8 total.
2. Per PIN photodiode, 4 or 8 total.
100 Kohms min.
2 pF typ.
10
µWatt
max.
1 nA max., T = 23°C, -5V bias
15 nA max., T = 70°C, -5V bias
-14V min., -2V max.
+/- 15%
10 Mohms min.
8 pF max., at -5V bias
Housing Dimensions
Photodiode frequency bandwidth 1500 MHz max.
Units: mm
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804
Tel. (510)620-5000
Fax. (510)620-4100
www.diconfiber.com
0101A
Integrated Modules
For 100 GHz Channel MUX. Custom bands by request.
For 4 Channel VMUX.
40 dB high isolation by request.
At 0 dB, relative to 23
o
C.
For fast "F" ripple type only. Max. change of each 200 GHz segment within
C or L band, depending on part number.
Electrical Specifications
Electrical connector
VOA DC drive voltage
Samtec TSSH-110-01-T-D-RA
0 - 5 VDC
VOA-MUX/DMUX Modules
为我们提建议&公告
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
