KPT / KPSE / KPTC Connectors
In Accordance with VG95328
We Connect
Interconnect solutions for the
harshest environments.
Key Features
• Simple to install and maintain
• Hand insertable contacts
• No wedge locks or blind seals required
The ITT Cannon difference
• From 2 way to 24-way layouts
• Global capabilities
• Up to IP69K sealing& local support
• Proven application expertise
• Utilizes Trident Contacts
• A century of interconnect leadership
• Positive locking latch & polarization key
• A committed innovator & ratio
• Excellent cost/performancebusiness partner
When it matters most
For more than a century, ITT Cannon has developed innovative interconnect solutions for the world’s harshest environ-
ments. With facilities in the United States, Germany, Italy, Mexico, China and Japan, each with its unique strengths, we offer our
customers interconnect solutions that are truly Engineered for Life.
In addition to this truly global footprint, we offer highly specialized, segmented industry expertise. We have a proven track record as
an industry leader in harsh-environment applications. This has equipped us with the knowledge needed to continue to produce
the most resilient, reliable connectors for our customers’ most challenging conditions.
About ITT
ITT is a diversified leading manufacturer of highly engineered
critical components and customized technology solutions
for the energy, transportation and industrial markets.
Building on its heritage of innovation, ITT partners with its
customers to deliver enduring solutions to the key industries
that underpin our modern way of life. Founded in 1920,
ITT is headquartered in White Plains, N.Y., with employees in
more than 35 countries and sales in a total of approximately
125 countries. For more information, visit www.itt.com.
2
www.ittcannon.com
lndustrial / lnstrumentation
Rail
Defense Vehicles
Oil & Gas
Medical
Commercial & Military Aerospace
Heavy Equipment
Our connector portfolio
remains the most extensive
in the industry, offering a reliable and cost
effective range of interconnect solutions
www.ittcannon.com
3
Introduction to KPSE /KPT /KPTC
ITT Cannon’s KPSE / KPT and KPTC series of miniature positive bayonet locking
connectors offer a range of high-density signal solutions. They are designed
according to MIL-DTL-26482 Series I or VG95328 – details below. Next to the
original use in military vehicles these connector series have become a standard
for Industrial uses as eg. off-road vehicles, sensors, factory equipment and other
heavy industry applications.
All three product lines have specific characteristics and provide a set of unique variants, however, all lines are
fully intermateable with each other as well as any other connector series designed to MIL-DTL 26482 Series I
or VG95238 standards.
Product Series
KPSE
KPSE
KPT
KPT
KPTC
Origin
German make/origin
US make/origin
German make/origin
US make/origin
German make/origin
VG 95328 Approved
Yes
No
No
No
No
MIL-DTL 26482 Series I Approved
No
No
No
No
No
KPSE
is the high-performance crimp contact solution featuring a
clip-in retention system for fast and simple assembly. ITT Cannon
is approved to offer this line with VG marking according to
VG95328.
Common features of KPSE / KPT / KPTC:
➤
Intermateability with all product lines designed
to MIL-DTL-26482 Series I
➤
Environmental sealing to IP67 and IP68
➤
½ turn positive bayonet coupling for quick mating
& unmating
➤
Shielded backshell accessories
➤
A range of RoHS compliant plating alternatives to
Cadmium including Nickel, Zinc Nickel and Zinc
Cobalt versions
➤
Customizing options
KPT
is the first of two general duty series, and equipped with
solder pot contacts and glued in contacts. This makes this product
ideal for any prototype solution as well as for military
vehicle applications based on the MIL-DTL-268482 Series I
standard.
KPTC
is the second ITT Cannon general duty series with either
crimp or solder pot contact versions. In comparison this series
comes with a simpler design and avoids the high-performance
clip-in solution of KPSE as well as the glued contact assembly
of KPT which makes this line a good choice for many Industrial
applications.
Both KPTC as well as KPT add typical Industrial back shells to
their portfolio.
This document solely applies to European manufactured KPT / KPSE / KPTC products.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
4
www.ittcannon.com
Contact Principle
CONTACT & SEALING PRINCIPLE
1
2
3
4
KPSE
uses a three piece insulator stack up consisting of
1 - rubber insulator
2 - plastic wafer / retaining clips
3 - ubber grommet to seal individual wires
4 - two piece machined contact with retaining clip
Rubber insulator (1) and grommet (3) together with the front sealing ring provide
the sealing in mated condition as well as the sealing of individual wires protruding
through the grommet.
Contact retention is provided using a two piece contact with retaining clip. The stiff
plastic wafer or individual metal clips provide the specified contact retention. A good
tactile response is given when contacts are pushed in the final assembly position.
Contacts are installed from the rear by hand or with an insertion tool to ease assembly.
Contact removal is done with an extraction tool from the front.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
www.ittcannon.com
1
2
3
KPT
uses a rubber insulator and sealing grommet
1 - rubber insulator
2 - rubber grommet to seal individual wires
3 - one piece machined contact
Rubber insulator (1) and grommet (2) together with the front sealing ring provide the
sealing in mated condition as well as the sealing of individual wires protruding through
the grommet.
Contact retention is provided by form fit of the machined contact in the rubber
insulator. Additionally, glue is applied to secure contacts in the exact mounting
position. KPT is equipped with solder pot contacts only and pre installed by the factory.
1
2
3
KPTC
uses a rubber insulator and sealing grommet
1 - rubber insulator
2 - rubber grommet to seal individual wires
3 - one piece machined contact
Rubber insulator (1) and grommet (2) together with the front sealing ring
provide the sealing in mated condition as well as the sealing of individual wires
protruding through the grommet.
Contact retention is provided by form fit of the machined contact in the rubber
insulator. Solder pot contacts are pre-installed by the factory, crimp contacts are
delivered separately. Glue is not applied to KPTC connectors.
Contacts are installed from the rear with an insertion tool.
Contact removal is done with an extraction tool from the front.
5
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
