Ten-X
®
10 mm switching soleniod valve
FEATURES
· 3-way, 2 position (NO, NC & Distributor)
· Optional ‘Hit and Hold’ drive electronics
using pulse width modulation (PWM)
at 25-32 kHz
· Minimum flow of 8 lpm @ 6 psi and
22 lpm @ 30 psi
· 10 mm single piece body design
· Barbed pressure ports allow for direct
tubing or manifold assemblies
· RoHS compliant
MEDIA COMPATIBILITY
Non-reactive gases
WETTED MATERIALS
PBT (polybutylene terephthalate) glass filled;
430FR series stainless steel; 302 series stainless
steel; Viton (FKM) or silicone elastomer
PHYSICAL PROPERTIES
Operating environment (continuous duty) 0 to 50 °C
Storage temperature
Spacing
-40 to 70 °C
10 mm (centerline)
Barbs for 1.98 mm (0.078 in) I.D. tubing
or manifold mount with gasket
ELECTRICAL
Power
Voltage
Electrical connections
0.5 W
5, 12, 24 V
DC
PC pins
Porting
Weight
without electronics
with electronics
Internal volume
10.7 g
12 g
0.131 cm
3
(0.0080 in
3
)
Ten-X is a registered trademark of Parker Hannifin Corporation.
E / 11260 / A
1/4
www.sensortechnics.com
Ten-X
®
10 mm switching soleniod valve
PERFORMANCE CHARACTERISTICS
Part no.
914-1...
(silicone elastomer)
914-2...
(Viton elastomer)
Pressure
0...6 psi
0...6 psi,
0...20 psi,
0...30 psi
Minimum flow
Orifice siz es/
Equivalent C
V1
Leak rate
2
Response
≤
0.016 sccm
<5 ms
cycling
<20 ms
cycling
8 lpm @ 6 psi,
22 lpm @ 30 psi
0.060" (1.52 mm)/
0.042 C
V
≤
0.2 sccm
FLOW CURVES (typical air flow at 24 °C)
3
6 psi devices
20 psi and 30 psi
devices
Notes:
1
The C
V
value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a
valve. If several valves with the same nominal diameter are compared, the valve with the highest C
V
value has the best flow
dynamics design. The equivalent european measure is the k
V
value expressed in m
3
/h (k
V
= 0.86 C
V
).
2
sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and
pressure. 1000 sccm = 1 slpm.
3
slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.
1 slpm = 1000 sccm.
E / 11260 / A
2/4
www.sensortechnics.com
Ten-X
®
10 mm switching soleniod valve
OUTLINE DRAWING AND MANIFOLD MOUNT DIAGRAM
6 psi devices
1.139 (28.93)
0.020 (0.5)
sq. pins
0.236 (6.00)
0.077 (1.96)
0.475
(12.07)
0.170
(4.32)
0.575
0.375 (14.61)
(9.53) Long pin
Short pin
0.148 (3.75)
Ø 0.120 (3.05)
Barb fittings for
0.078 (1.98) I.D.
polyurethane tubing
Normally open port
Common port
Normally closed port
0.030 (0.76)
for use with wire hold down
for PCB mounting
0.976 (24.79)
0.766 (19.46)
Ø 0.093 (2.36)
dimensions in inches (mm)
0.212 (5.38)
2-56
UNC-2B
0.394
(10.01)
0.871
(22.12)
0.197
(5.0)
0.394
(10.01)
Ø 0.090
Ø 0.132 ±0.001 x 0.180
Ø 0.154 ±0.003 x 0.055 ±0.002
c'drill 40° to Ø 0.132
(Ø 2.29
Ø 3.35 ±0.025 x 4.57
Ø 3.91 ±0.076 x 1.4 ±0.05
c'drill 40° to Ø 3.35)
0.390
(9.91) 0.195
(4.95)
Feature for
2-56 screw for
valve mounting
0.870 (22.10)
1.25 (31.78)
0.207 (5.26)
0.174 (4.42)
0.766
(19.46)
0.976
(24.79)
20 psi and 30 psi devices with electronics
1.303 (33.10)
1.174 (29.81)
0.212
(5.38)
0.025 (0.64)
sq. pins
0.100
(2.54)
0.361
(9.17)
0.619
(15.72)
Normally open port
Common port
0.170
(4.32)
Ø 0.120 (3.05)
0.035 (0.89)
Ø 0.093 (2.36)
Barb fittings for
0.078 I.D.
polyurethane tubing
2-56
UNC-2B
0.394
(10.01)
0.871
(22.12)
Normally closed port
dimensions in inches (mm)
0.976 (24.79)
0.766 (19.46)
0.267 (6.78)
0.197
(5.0)
0.394
(10.01)
Ø 0.090
Ø 0.132 ±0.001 x 0.180
Ø 0.154 ±0.003 x 0.055 ±0.002
c'drill 40° to Ø 0.132
(Ø 2.29
Ø 3.35 ±0.025 x 4.57
Ø 3.91 ±0.076 x 1.4 ±0.05
c'drill 40° to Ø 3.35)
0.390
(9.91) 0.195
(4.95)
Feature for
2-56 screw for
valve mounting
0.870 (22.10)
0.262 (6.65)
0.766
(19.46)
0.976
(24.79)
E / 11260 / A
3/4
www.sensortechnics.com
Ten-X
®
10 mm switching soleniod valve
ORDERING INFORMATION
6 psi devices
Series
Options
914
Elastomer
1
Silicone
2
Type
1*
2/3 way, NO, 6 psi
Model
1
Standard
(without
electronics)
Voltage
05
5 V
DC
Electical
1
Short pins
2
Long pins
Accessories*
000
none
Viton (FKM)
2**
2/3 way, NC, 6 psi
6**
Distributor, 6 psi
* Silicone elastomer only
** Viton (FKM) elastomer only
12
12 V
D C
24
24 V
D C
* please order
separately
Example:
914
1
1
1
05
1
000
20 psi and 30 psi devices with electronics
Series
Options
914
2
Elastomer
Type
2
Model
Integrated
electronics
Voltage
05
5 V
DC
3
Electical
Pins
(2.54 mm)
Accessories*
000
none
Viton (FKM)
3*
2/3 way, NC, 30 psi
4**
2/3 way, NO, 30 psi
5**
Distributor, 20 psi
* Silicone elastomer only
** Viton (FKM) elastomer only
12
12 V
D C
24
24 V
D C
* please order
separately
Example:
914
2
3
2
05
3
000
Note: Not all combinations might be available.
Please contact your nearest Sensortechnics sales representative for further information.
Accessories
(please order separately using the following order numbers)
Order No.
191-000112-010
(free of charge)
191-000112-012
(free of charge)
195-000211-001
(free of charge)
195-000242-001
(free of charge)
590-000073-001
(extra charge)
Description
Mounting screws for 6 psi devices (2 screws per valve)
Mounting screw for 20 psi and 30 psi devices (2 screws per valve)
Manifold gasket (FKM) for 6 psi devices (1 gasket per valve)
Manifold gasket (FKM) for 20 psi and 30 psi devices (1 gasket per valve)
18 " leads w/ connector (only for devices with integrated electronics)
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
E / 11260 / A
4/4
www.sensortechnics.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
