EX-200
Evacuated Miniature Crystal Oscillator
EX-200
Description
The EX-200 Series o ers a ruggedized hybrid thick lm construction in a low pro le hermetically sealed 16pin DDIL package,
which can withstand severe environmental conditions. This product utilizes VI’s EMXO technology resulting in excellent stability
performance and fast warm-up with low power consumption.
Features
•
•
•
•
Ruggedized hybrid thick lm construction
Low Power Consumption
Previous Model: EX-240 series
Frequency Range: 10 MHZ - 20 MHZ
Applications
• Severe Environmental Conditions
Performance Speci cations
Frequency Stabilities
1
Parameter
vs. operating temperature range (refer-
enced to +25°C)
Min
-20
-30
-50
Typ
Max
+20
+30
+50
Units
ppb
ppb
ppb
Condition
-0… +70°C
-20… +70°C
-40… +85°C
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Speci cations
Frequency Stabilities
1
Parameter
Initial Tolerance (for xed frequency)
vs. supply voltage change
vs. load change
vs. aging / day
vs. aging / 1 year
vs. aging / 10 year
vs. aging / 10 year
vs. aging / 10 year
Warm-up Time
Min
-1.0
-10
-10
-2.0
-200
-1000
-1500
-2000
Typ
Max
+1.0
+10
+10
+2.0
+200
+1000
+1500
+2000
90
120
Units
ppm
ppb
ppb
ppb
ppb
ppb
ppb
ppb
seconds
seconds
VDC
VDC
Watts
Watts
Condition
at time of shipment, nominal EFC
VS ± 5%
Load ± 5%
after 7 days of operation
10 to <12MHz
12 to <16MHz
16 to 20MHz
to ± 1ppm of nal frequency @+25°C
to ± 100ppb of nal frequency @+25°C
Supply Voltage (Vs)
Supply voltage (Standard)
Supply voltage (Option)
Power Consumption
4.75
3.135
5.0
3.3
5.25
3.465
2.5
0.7
HCMOS
15
0.1
0.9
+7
40
60
Sinewave
50
0
+3.0
+1.5
+4.5
+3.0
+6.0
-25
-60
Fixed; No adjust
Su cient to compensate for 10
years aging
EFC (0V to 4Vdd)
ohm
dBm
dBm
dBc
dBc
50 ohm load
50 ohm load
pF
VDC
VDC
ns
%
(10-90%)
(Voh-Vol)/2
during warm-up
steady state @ +25°C
RF Output
Signal [Standard]
Load
Signal Level (Vol)
Signal Level (Voh)
Rise/Fall Time
Duty cycle
Signal [Option]
Load
Output Power (Standard)
Output Power (Option)
Harmonics
Sub-Harmonics
Tuning Range
Tuning Range
Frequency Tuning (EFC)
Additional Parameters
-100
-130
-140
-145
-150
1
0.2
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ppb/g
ppb
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
Test at 10g sine vibration at 100Hz
Tau = 1 sec
Phase Noise @ 10 MHz
G-Sensitivity
Allan Deviation
Environmental Conditions (Designed to meet)
• Mechanical Shock (survive)
• Vibration Random (survive)
• Vibration Sine (survive)
• Thermal Shock (survive)
MIL-STD-202, Test Method 213, Condition E (100G, 0.5msec)
MIL-STD-202, Test Method 214, Condition I-H (20Grms, 3 minutes/axis)
MIL-STD-202, Test Method 204, Condition D (20Grms, 20 minutes/axis)
MIL-STD-202, Test Method 107, Condition A-2 (50 Cycles, -55°C to +85 °C)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Outline Drawing / Enclosure
Dimensions in inches
Type A
Code
0
Height “H”
0.35”
Pin Length “L”
0.17”
Pin Connections
1
2-4
8
9
13 - 15
16
EFC \ No Connect
No Connect
Ground (Case)
RF Output
No Connect
Supply Voltage Input
Recommended Re ow Pro le
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
EX - 200 0 - D A J - 508 0 - 10M0000000
Product Family
EX: EMXO
Package
25 x 25 mm
Height
0: A0.35”
Supply Voltage
D: 5 Vdc
E: 3.3 Vdc
RF Output Code
A: HCMOS
E: Sinewave
Frequency
Frequency Control
0: Fixed Frequency (HCMOS)
1: Fixed Frequency (0 dBm)
2: Fixed Frequency (+3 dBm)
3: Electrical Tuning (HCMOS)
4: Electrical Tuning (0 dBm)
5: Electrical Tuning (+3 dBm)
Stability Code
208: ±20ppb
308: ±30ppb
508: ±50ppb
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
T: 0°C to +70°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modi cation.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Asia:
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 11-25-2008 daf
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
