LED SPECIFICATION
520MY8C
Features
Single color
High bright output
Low power consumption
High reliability and long life
Descriptions
Dice material GaN
Emitting Color
Super Bright Amber (Yellow)
Device Outline
5mm Round Type/ 5mm
Lens Type
Water Clear
1. All dimensions are millimeters
2. Tolerance is +/-0.25mm unless otherwise noted
Directivity
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Page: 1
LED
SOLDERING
METHOD
LAMP APPLICATION
SOLDERING CONDITIONS
REMARK
Solder no closer than 3mm from the
DIP
SOLDERING
Bath temperature: 260±5
Immersion time: with 5 sec
base of the package
Using soldering flux,” RESIN FLUX”
is recommended.
During soldering, take care not to
press the tip of iron against the
lead.
Soldering iron: 30W or smaller
SOLDERING
Temperature at tip of iron: 260 or lower (To prevent heat from being
IRON
transferred directly to the lead, hold
Soldering time: within 5 sec.
the lead with a pair of tweezers
while soldering
1) When soldering the lead of LED in a condition that the package is fixed with a panel (See Fig.1),
be careful not to stress the leads with iron tip.
2) When soldering wire to the lead, work with a Fig (See Fig.2) to avoid stressing the package.
Page :
5
DIY/开源硬件专区
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
