LT345S-RSD-x
LT345S-RSC-x
LT345S-RST-x
Color Diffused LED – 3mm (T1), With Flange
TECHNICAL DATA
DATA SHEET 3566, REV. -
Notes: All dimensions are in mm (inch)
Tolerance is
±
0.25 mm (0.01”) unless otherwise specified
Absolute Maximum Rating: (T
a
= 25 C)
Symbol
Description
Max
Unit
P
D
Power dissipation
80
mW
V
R
Reverse voltage
5
V
I
F
Forward current
30
mA
o
o
Topr
Operating temperature range
-30 C to 80 C
o
o
Tstg
Storage temperature range
-35 C to 85 C
o
Lead soldering temperature
≤
260 C for 5 seconds
Electro-optical Characteristic: (T
a
=25
°C)
Part No.
LT345S-RSD-1
LT345S-RST-1
LT345S-RSC-1
Material
GaAlAs
GaAlAs
GaAlAs
Chip
Color
Red
Red
Red
Wavelength
(nm)
660
660
660
Lens Type
Red diffused
Red Trans.
Water clear
Iv (mcd)
@20mA
Typical
50
500
500
Viewing
Angle
(degree)
60
30
30
o
Features
•
•
•
•
•
•
Versatile mounting on PCB or panel
Popular T-1 diameter
Higher luminous efficiency than incandescent lamp
General purpose leads
Reliable and rugged
Diffusants, tints and optical design are balanced to yield superior light output
•
221 West Industry Court
•
Deer Park, NY 11729-4681
•
Phone: (631) 586-7600
•
Fax: (631) 242-9798
•
http://www.sensitron.com
•
E-Mail: sales@sensitron.com
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to
improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation,
traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices
that feature assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other
cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no
responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage
resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron
Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written
permission of Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their
application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their
direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be
taken in accordance with related laws and regulations.
•
221 West Industry Court
•
Deer Park, NY 11729-4681
•
Phone: (631) 586-7600
•
Fax: (631) 242-9798
•
http://www.sensitron.com
•
E-Mail: sales@sensitron.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
