FMV-593
Duplex V /Duplex 2A
Bi-directional Video with
Two Stereo Audio Channels
The FMV-593 is a duplex Video
transmission system with two
duplex Audio ports, ideal for
CCTV cameras, video
conferencing and ITS. Status
indicators on Video, Sync, FM Data,
carrier detect, voltage, temperature,
and optical levels are monitored via
LEDs.
Video
Audio
Data
System Design
All of our units come as an Insert Card
version. The cards can be inserted into
our 18-slot, 19” rackmountable card
cage (CC-18-80W), or one of our smaller
Desk Top Card Racks (DTCR series).
The Desk Top Card Racks can handle
one, two, four, or seven cards, allowing
for greater flexibility and future
expansion. They can sit on a flat
surface as a larger stand-alone unit, or
can be surface mounted with the
flanges provided. Each one of our card
housings operates with an appropriate
power supply. The regulated switching
power supply has short circuit
protection and an input operating
voltage of 87- 264 V
AC
.
Features
• Multimode or singlemode operation over one fiber
• 8 MHz video bandwidth
• 10 Hz to 20 KHz audio bandwidth
• True DC restoration
• Flat frequency response
• Complies with RS-170 and RS-170A EIA video standards
• Compatible with NTSC, PAL and SECAM
• No EMI or RFI and no ground loops
• Stand Alone or Rack Mount
• Ideal for CCTV cameras, video conferencing and ITS
865
q
q
1310
q
q
1550
Type
LED
Mode
MM
Wavelength
Suffix
L0/L1
Fiber
Type
50 /125µ
62.5/125µ
Output
Power
-18 dBm
Receiver
Sensitivity
-34 dBm
Optical
Loss
Budget
16 dB
Range*
3 km
Conn
Type
ST
q
q
Laser
SM
L2/L3
09/125µ
-10 dBm
-34 dBm
24 dB
25 km
FC
* Chromatic dispersion should be taken into account.
90
800-867-8426 • info@opticomm.com • www.opticomm.com • Contact factory for higher requirement.
CCTV Security
Networking
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Signal to noise ratio
FM carrier frequency
Connector type
Audio
Audio in/out impedance
Audio in/out level
Frequency response
Signal to noise ratio
Total harmonic distortion
Connector type
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Vibration
Shock
75
Ω
1 volt peak to peak, 1.5 volts max
5 Hz to 8 MHz @ -3dB
< 1.0 % typical
< 1.0° typical
± 1.1 % typical
≤
0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
70 MHz
BNC
600
Ω
(balanced) or 10 kΩ (unbalanced)
-6 to +6 dBm
10 Hz to 20 KHz
> 60 dB
< 1.0 %, 1 KHz at maximum modulation
Hi-density 15 pin DB9 (DE15)
Selection Guid
Digital Broadca
AM/IM Analo
SWFM Analo
SWFM Analo
Analog-to-Digit
RGB Vide
Datacom
RF CAT
Append
Stand Alone (SA): 7.16” L x 6.51” W x 1.75” H
Insert Card (IC): 6.3” L x 1.7” W x 4.0” H
-40° C to +74° C
-55° C to +85° C
0 to 95% non-condensing
9 V
DC
(300 mA) or 110/220 V
AC
Up to 5 g's
Up to 12 g's
53 oz
29 oz
Opticomm
reserves the
right to change
product
specifications
without notice.
Diagnostics
Status monitoring
LED indicator
Emissions:
FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity:
ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety:
UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
Sample Configuration
91
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
