Intel
®
I/O Controller Hub 8 (ICH8)
Family
Datasheet
– For the Intel
®
82801HB ICH8, 82801HR ICH8R, 82801HDH ICH8DH,
82801HDO ICH8DO, 82801HBM ICH8M, and 82801HEM ICH8M-E
I/O Controller Hubs
May 2007
Document Number: 313056-003
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL
®
PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for
use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The Intel
®
I/O Controller Hub 8 (ICH8) Family chipset component may contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
I
2
C is a two-wire communications bus/protocol developed by Philips. SMBus is a subset of the I
2
C bus/protocol and was developed by Intel.
Implementations of the I
2
C bus/protocol may require licenses from various entities, including Philips Electronics N.V. and North American Philips
Corporation.
Intel
®
Active Management Technology requires the platform have an Intel
®
AMT-enabled chipset and network hardware and software, be plugged into a
power source, and have a network connection.
Alert on LAN is a result of the Intel-IBM Advanced Manageability Alliance and a trademark of IBM.
Intel, Intel SpeedStep and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2006–2007, Intel Corporation
2
Intel
®
ICH8 Family Datasheet
Contents
1
Introduction
............................................................................................................ 45
1.1
Overview ......................................................................................................... 48
1.2
Intel
®
ICH8 Family High-Level Component Differences ........................................... 55
Signal Description
................................................................................................... 57
2.1
Direct Media Interface (DMI) to Host Controller ..................................................... 60
2.2
PCI Express* .................................................................................................... 60
2.3
LAN Connect Interface ....................................................................................... 61
2.4
Gigabit LAN Connect Interface ............................................................................ 61
2.5
Firmware Hub Interface...................................................................................... 62
2.6
PCI Interface .................................................................................................... 63
2.7
Serial ATA Interface........................................................................................... 66
2.8
IDE Interface (Mobile Only) ................................................................................ 68
2.9
LPC Interface.................................................................................................... 69
2.10 Interrupt Interface ............................................................................................ 70
2.11 USB Interface ................................................................................................... 71
2.12 Power Management Interface.............................................................................. 72
2.13 Processor Interface............................................................................................ 75
2.14 SMBus Interface................................................................................................ 77
2.15 System Management Interface............................................................................ 77
2.16 Real Time Clock Interface ................................................................................... 78
2.17 Other Clocks..................................................................................................... 79
2.18 Miscellaneous Signals ........................................................................................ 79
2.19 Intel
®
High Definition Audio Link ......................................................................... 80
2.20 Serial Peripheral Interface (SPI) .......................................................................... 81
2.21 Intel
®
Quick Resume Technology (Intel
®
ICH8DH Only) ......................................... 82
2.22 Controller Link .................................................................................................. 82
2.23 Intel
®
Quiet System Technology (Desktop Only) ................................................... 83
2.24 General Purpose I/O Signals ............................................................................... 83
2.25 Power and Ground............................................................................................. 86
2.26 Pin Straps ........................................................................................................ 88
2.26.1 Functional Straps ................................................................................... 88
2.26.2 External RTC Circuitry ............................................................................. 90
Intel
®
ICH8 Pin States.............................................................................................
91
3.1
Integrated Pull-Ups and Pull-Downs ..................................................................... 91
3.2
IDE Integrated Series Termination Resistors (Mobile Only)...................................... 92
3.3
Output and I/O Signals Planes and States............................................................. 92
3.4
Power Planes for Input Signals .......................................................................... 102
Intel
®
ICH8 and System Clock Domains.................................................................
107
Functional Description
........................................................................................... 109
5.1
PCI-to-PCI Bridge (D30:F0) .............................................................................. 109
5.1.1 PCI Bus Interface ................................................................................. 109
5.1.2 PCI Bridge As an Initiator ...................................................................... 109
5.1.2.1 Memory Reads and Writes........................................................ 110
5.1.2.2 Configuration Reads and Writes ................................................ 110
5.1.2.3 Locked Cycles ........................................................................ 110
5.1.2.4 Target / Master Aborts............................................................. 110
5.1.2.5 Secondary Master Latency Timer............................................... 110
5.1.2.6 Dual Address Cycle (DAC) ........................................................ 110
5.1.2.7 Memory and I/O Decode to PCI................................................. 111
5.1.3 Parity Error Detection and Generation ..................................................... 111
2
3
4
5
Intel
®
ICH8 Family Datasheet
3
5.2
5.3
5.4
5.5
5.1.4 PCIRST# ............................................................................................. 111
5.1.5 Peer Cycles .......................................................................................... 112
5.1.6 PCI-to-PCI Bridge Model ........................................................................ 112
5.1.7 IDSEL to Device Number Mapping ........................................................... 112
5.1.8 Standard PCI Bus Configuration Mechanism.............................................. 113
PCI Express* Root Ports (D28:F0,F1,F2,F3,F4,F5) ................................................ 113
5.2.1 Interrupt Generation ............................................................................. 113
5.2.2 Power Management............................................................................... 114
5.2.2.1 S3/S4/S5 Support ................................................................... 114
5.2.2.2 Resuming from Suspended State ............................................... 114
5.2.2.3 Device Initiated PM_PME Message ............................................. 114
5.2.2.4 SMI/SCI Generation................................................................. 115
5.2.3 SERR# Generation ................................................................................ 115
5.2.4 Hot-Plug .............................................................................................. 115
5.2.4.1 Presence Detection .................................................................. 115
5.2.4.2 Message Generation ................................................................ 116
5.2.4.3 Attention Button Detection ....................................................... 116
5.2.4.4 SMI/SCI Generation................................................................. 117
Gigabit Ethernet Controller (B0:D25:F0) ............................................................. 118
5.3.1 GbE PCI Bus Interface ........................................................................... 118
5.3.1.1 Transaction Layer.................................................................... 118
5.3.1.2 Data Alignment ....................................................................... 118
5.3.1.3 Configuration Request Retry Status ........................................... 119
5.3.2 Error Events and Error Reporting ............................................................ 119
5.3.2.1 Data Parity Error ..................................................................... 119
5.3.2.2 Completion with Unsuccessful Completion Status ......................... 119
5.3.3 Ethernet Interface ................................................................................ 119
5.3.3.1 MAC/LAN Connect Interface ...................................................... 119
5.3.4 PCI Power Management ......................................................................... 120
5.3.4.1 Wake-Up................................................................................ 120
5.3.5 Configurable LEDs................................................................................. 122
5.3.6 Intel
®
Auto Connect Battery Saver (Mobile Only) ...................................... 122
5.3.6.1 Partial and Full Power Down Options .......................................... 123
5.3.6.2 Intel
®
ACBS Signal Configurations ............................................. 123
LPC Bridge (w/ System and Management Functions) (D31:F0) ............................... 124
5.4.1 LPC Interface ....................................................................................... 124
5.4.1.1 LPC Cycle Types ...................................................................... 125
5.4.1.2 Start Field Definition ................................................................ 125
5.4.1.3 Cycle Type / Direction (CYCTYPE + DIR)..................................... 126
5.4.1.4 Size....................................................................................... 126
5.4.1.5 SYNC..................................................................................... 127
5.4.1.6 SYNC Time-Out ....................................................................... 127
5.4.1.7 SYNC Error Indication .............................................................. 127
5.4.1.8 LFRAME# Usage...................................................................... 127
5.4.1.9 I/O Cycles .............................................................................. 128
5.4.1.10 Bus Master Cycles ................................................................... 128
5.4.1.11 LPC Power Management ........................................................... 128
5.4.1.12 Configuration and Intel
®
ICH8 Implications................................. 128
DMA Operation (D31:F0) .................................................................................. 129
5.5.1 Channel Priority.................................................................................... 129
5.5.1.1 Fixed Priority .......................................................................... 130
5.5.1.2 Rotating Priority ...................................................................... 130
5.5.2 Address Compatibility Mode ................................................................... 130
5.5.3 Summary of DMA Transfer Sizes ............................................................. 131
5.5.3.1 Address Shifting When Programmed for 16-Bit I/O
Count by Words ...................................................................... 131
5.5.4 Autoinitialize ........................................................................................ 131
4
Intel
®
ICH8 Family Datasheet
5.6
5.7
5.8
5.9
5.10
5.5.5 Software Commands............................................................................. 132
LPC DMA ........................................................................................................ 132
5.6.1 Asserting DMA Requests........................................................................ 132
5.6.2 Abandoning DMA Requests .................................................................... 133
5.6.3 General Flow of DMA Transfers............................................................... 133
5.6.4 Terminal Count .................................................................................... 133
5.6.5 Verify Mode ......................................................................................... 134
5.6.6 DMA Request Deassertion...................................................................... 134
5.6.7 SYNC Field / LDRQ# Rules..................................................................... 135
8254 Timers (D31:F0) ..................................................................................... 135
5.7.1 Timer Programming .............................................................................. 136
5.7.2 Reading from the Interval Timer............................................................. 137
5.7.2.1 Simple Read........................................................................... 137
5.7.2.2 Counter Latch Command.......................................................... 137
5.7.2.3 Read Back Command .............................................................. 138
8259 Interrupt Controllers (PIC) (D31:F0) .......................................................... 139
5.8.1 Interrupt Handling................................................................................ 140
5.8.1.1 Generating Interrupts.............................................................. 140
5.8.1.2 Acknowledging Interrupts ........................................................ 140
5.8.1.3 Hardware/Software Interrupt Sequence ..................................... 141
5.8.2 Initialization Command Words (ICWx) ..................................................... 141
5.8.2.1 ICW1 .................................................................................... 141
5.8.2.2 ICW2 .................................................................................... 142
5.8.2.3 ICW3 .................................................................................... 142
5.8.2.4 ICW4 .................................................................................... 142
5.8.3 Operation Command Words (OCW) ......................................................... 142
5.8.4 Modes of Operation .............................................................................. 143
5.8.4.1 Fully Nested Mode................................................................... 143
5.8.4.2 Special Fully-Nested Mode........................................................ 143
5.8.4.3 Automatic Rotation Mode (Equal Priority Devices)........................ 143
5.8.4.4 Specific Rotation Mode (Specific Priority).................................... 143
5.8.4.5 Poll Mode............................................................................... 144
5.8.4.6 Cascade Mode ........................................................................ 144
5.8.4.7 Edge and Level Triggered Mode ................................................ 144
5.8.4.8 End of Interrupt (EOI) Operations ............................................. 144
5.8.4.9 Normal End of Interrupt........................................................... 144
5.8.4.10 Automatic End of Interrupt Mode .............................................. 145
5.8.5 Masking Interrupts ............................................................................... 145
5.8.5.1 Masking on an Individual Interrupt Request................................ 145
5.8.5.2 Special Mask Mode.................................................................. 145
5.8.6 Steering PCI Interrupts ......................................................................... 145
Advanced Programmable Interrupt Controller (APIC) (D31:F0) .............................. 146
5.9.1 Interrupt Handling................................................................................ 146
5.9.2 Interrupt Mapping ................................................................................ 146
5.9.3 PCI / PCI Express* Message-Based Interrupts .......................................... 147
5.9.4 Front Side Bus Interrupt Delivery ........................................................... 147
5.9.4.1 Edge-Triggered Operation ........................................................ 148
5.9.4.2 Level-Triggered Operation........................................................ 148
5.9.4.3 Registers Associated with Front Side Bus Interrupt Delivery.......... 148
5.9.4.4 Interrupt Message Format ........................................................ 148
Serial Interrupt (D31:F0) ................................................................................. 149
5.10.1 Start Frame......................................................................................... 149
5.10.2 Data Frames........................................................................................ 150
5.10.3 Stop Frame ......................................................................................... 150
5.10.4 Specific Interrupts Not Supported via SERIRQ .......................................... 150
5.10.5 Data Frame Format .............................................................................. 151
Intel
®
ICH8 Family Datasheet
5
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
