3M
™
4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle
810 Series
• Tripolarized for robust alignment when mating to 820
series socket
• 50 mil × 100 mil halves the connector length vs. traditional
100 mil x 100 mil products
• Latching Ejector for rugged high performance applications
• Available for through hole or surfacemount attachment
• High temperature plastic for lead free surfacemount or
Paste-in-Hole soldering methods
• Four-wall shroud provides contact protection
• Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100
• See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance information
Date Modified: May 11, 2012
TS-0253-H
Sheet 1 of 7
Physical
Insulation:
Material: High Temperature Plastic (LCP)
Flammability: UL 94V-0
Color: Black (RB Plating only) or Natural
Contact:
Plating:
Material: Copper Alloy
Underplating: 100 µ" [2.54 mm] Nickel
Wiping Area: 30 µ" [0.76 mm] Gold
Solder Tails: Matte Tin or Tin Lead (See Ordering Information)
Marking:
3M Logo, Part Number and Orientation Triangle
Mating Compatibility: 820 Series (TS-0254)
Electrical
2.00 A, 4 Contacts Powered
0.75 A, All Contacts powered
Rating Conditions: EIA-364-070 Method 2, 30 degrees C maximum temperature
rise, 20% derated. Reference appropriate 3M Product Specification for detailed
current derating curves.
Insulation Resistance:
> 1 × 10
9
Ω at 500 V
DC
Withstanding Voltage:
500 V
RMS
at Sea Level
Current Rating:
3.00 A, 1 Contact Powered
Environmental
Temperature Rating:
-55°C to +105°C
Process Rating:
Maximum 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
4-Wall, Tripolarized Header
C
Inch
[Imm]
Tolerance Unless Noted
.0
Inch
±.1
.00
±.01
.000
±.005
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle
Table 1
Contact
Quantity
020
026
036
A
B
C
.015 X .015
[0.38] X [0.38]
2X .092
[2.34]
See Note 1
Position 2
810 Series
Dimensions
A
1.060
[26.92]
1.210
[30.73]
1.460
[37.08]
1.560
[39.62]
1.810
[45.97]
2.060
[52.32]
2.260
[57.40]
2.560
[65.02]
3.060
[77.72]
B
0.722
[18.34]
0.872
[22.15]
1.122
[28.50]
1.222
[31.04]
1.472
[37.39]
1.722
[43.74]
1.922
[48.82]
2.222
[56.44]
2.722
[69.14]
C
0.500
[12.70]
0.650
[16.51]
0.900
[22.86]
1.000
[25.40]
1.250
[31.75]
1.500
[38.10]
1.700
[43.18]
2.000
[50.80]
2.500
[63.50]
Table 2
D Short
(Ref.)
1.671
[42.44]
1.821
[46.25]
2.071
[52.60]
2.171
[55.14]
2.421
[61.49]
2.671
[67.84]
2.871
[72.92]
3.171
[80.54]
3.671
[93.24]
D Long
(Ref.)
1.842
[46.79]
1.992
[50.60]
2.242
[56.95]
2.342
[59.49]
2.592
[65.84]
2.842
[72.19]
3.042
[77.27]
3.342
[84.89]
3.842
[97.59]
[ ] Dimensions for Reference Only
040
050
060
068
080
.310
[7.87]
Position 1
.015 X .015
[0.38] X [0.38]
.050 Typ
[1.27]
.100 Ref
[2.54]
100
PCB Thickness
.062 [1.57]
.094 [2.39]
.125 [3.18]
D
Long Latch
"F" Solder Tail Length ± .010
.090 [2.29]
.112 [2.84]
.143 [3.63]
Short Latch
.165
±
.010
[ 4.19 ]
.440
±
.010
[11.18]
.828 Ref
[ 21.03 ]
.405
[10.29]
2X Ø.116
[2.95]
.265
[6.73]
.105
[2.67]
.160 Ref
[4.06]
.306 Ref
[7.77]
.620 Ref
[ 15.75 ]
.140
±
.010
[3.56]
Position 1
Orientation Triangle
.015
[0.38]
“F” (See Table 2)
Notes:
1. This polarization bump does not exist on the 20 position header.
2. Recommended to be mated to the .050" X .100" Wiremount Socket 820 Series.
Notes:
Ordering Information
Ejector Latches
(If Ordered Separately)
Long Latches
3505-28 (natural)
3505-28B (black)
Short Latches
3505-29 (natural)
3505-29B (black)
PTH Right Angle Header
81XXX - 5X0X03 - XX
Contact Quantity
(See Table 1)
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Contact Tail:
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
Ejector/Latch System:
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
TS-0253-H
Sheet 2 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
4-Wall, Tripolarized Header
Ø.024
±
.003 Typ
[0.64]
.050
±
.002
[1.27]
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle
Table 3
Ejector Latches
None
.100
±
.002
[2.54]
*Solder Thief Solder Pads
(See Note 2)
810 Series
Dimension E Min
.575 [14.61]
1.010 [25.65]
.885 [22.48]
Long
Short
.025 - .035
[0.64] - [0.89]
.045 - .060
[1.14] - [1.52]
*Solder Thief Solder Pads required only on Solder side of PC Board.
View A
E
.025
±
.002
[0.64]
.050
±
.002 Typ
[1.27]
Tolerance Noncumulative
Position 2
Flow Solder
Direction
.355 Max
[9.02]
.305 Min
[7.75]
C
±
.002
View A
Position 1
2X Ø .109
±
.002
[2.77]
Ø.024
±
.003 Typ
[0.64]
.100
±
.002
[2.54]
.160
±
.002
[4.06]
Recommended Mounting Hole Pattern
PTH Right Angle Header
(shown for mounting side of PC Baord)
Notes:
1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time).
This will help prevent solder bridging.
2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC
Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the rows which leave the
solder bath last.
3. In order to facilitate soldering it is recommended that ejector latches be installed after the soldering process.
TS-0253-H
Sheet 3 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
4-Wall, Tripolarized Header
Table 1
Contact
Quantity
020
026
036
040
050
060
068
080
100
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle
Dimensions
A
1.060 [26.92]
1.210 [30.73]
1.460 [37.08]
1.560 [39.62]
1.810 [45.97]
2.060 [52.32]
2.260 [57.40]
2.560 [65.02]
3.060 [77.72]
A
810 Series
B
0.722 [18.34]
0.872 [22.15]
1.122 [28.50]
1.222 [31.04]
1.472 [37.39]
1.722 [43.74]
1.922 [48.82]
2.222 [56.44]
2.722 [69.14]
C Short (Ref.)
1.671 [42.44]
1.821 [46.25]
2.071 [52.60]
2.171 [55.14]
2.421 [61.49]
2.671 [67.84]
2.871 [72.92]
3.171 [80.54]
3.671 [93.24]
C Long (Ref.)
1.842 [46.79]
1.992 [50.60]
2.242 [56.95]
2.342 [59.49]
2.592 [65.84]
2.842 [72.19]
3.042 [77.27]
3.342 [84.89]
3.842 [97.59]
D
0.860 [21.84]
1.010 [25.65]
1.260 [32.00]
1.360 [34.54]
1.610 [40.89]
1.860 [47.24]
2.060 [52.32]
2.360 [59.94]
2.860 [72.64]
C
Table 5
PCB Thickness
.310
[7.87]
Position 2
B
See Note 1
"F" Solder Tail Length ± .010
.092 [2.34]
.110 [2.79]
.062 [1.57]
.094 [2.39]
Position 1
.015 X .015
[ 0.38 ] X [ 0.38 ]
.050 Typ
[1.27]
.100 Ref
[2.54]
.265 [6.73]
.05 Ref
Contact
Mating
Point
.100
[2.54]
.165
4.18
±.010
.440
11.17
.828 Ref
21.03
.620 Ref
15.75
.405
10.29
±.010
“F”
(See Table 2)
.140
±
.010
2X .092
2.34
2XØ .116
2,95
Position 1 Orientation Triangle
D
.015 X.015
[0.38 X 0.38]
.015
.38
Optional Press
t post mount
alignment feature
Notes:
1. This polarization bump does not exist
on the 20 position header.
2. Recommended to be mated to the
.050" x .100" 820 Series Socket.
Ordering Information
Ejector Latches
(If Ordered Separately)
Long Latches
3505-28 (natural)
3505-28B (black)
Short Latches
3505-29 (natural)
3505-29B (black)
PTH Straight Header
81XXX - 6X0X0X - XX
Contact Quantity
(See Table 4)
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Board Mounting Options:
1 = None (Special Order)
3 = Press fit posts both ends (Standard)
Contact Tail:
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
Ejector/Latch System:
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
TS-0253-H
Sheet 4 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle
810 Series
∅.025 ±
.003
[0.64]
.050
±
.002
[1.27]
Table 6
Ejector/Latches
None
Long
Short
Dimension E (Min)
.215 [5.46]
.650 [16.51]
.525 [13.34]
.100
±
.002
[2.54]
*Solder Thief
Solder Pads
(See Note2)
.045 - .060
[1.14] - [1.52]
.025 - .035
[0.64] - [0.89]
*Solder Thief Solder Pads required only on
Solder side of PC Board.
View A
E
2X .205
±
.003
[5.21]
D
±
.002
.160 Min
[4.06]
.050
±
.003
[1.27]
.050
±
.002 Typ
[1.27]
Tolerance Noncumulative
Flow Solder
Direction
VIEW A
.100
±
.002
[2.54]
View A
.225 Min
[5.72]
2X
∅
.109
±
.002
[2.77]
.100
±
.002
[2.54]
∅.025 ±
.003 Typ
[0.64]
Recommended Mounting Hole Pattern
PTH Vertical Header
(shown for mounting side of PC Board)
Inch
[Imm]
Tolerance Unless Noted
.0
Inch
±.1
.00
±.01
.000
±.005
Note:
1. Recommended to process PC Boards through the solder bath such that the connector enters end first
(two solder tails at a time). This will help prevent solder bridging.
2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to
help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the rows which leave the solder
bath last.
[ ] Dimensions for Reference Only
TS-0253-H
Sheet 5 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
消费电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
