REJ09B0301-0400
16
H8S/2138
Group
,
H8S/2134
Group
,
H8S/2138F-ZTAT™, H8S/2134F-ZTAT™,
H8S/2132F-ZTAT™
Hardware Manual
Renesas 16-Bit Single-Chip Microcomputer
H8S Family/H8S/2100 Series
H8S/2138
HD6432138S
HD6432138SW
HD64F2138
HD64F2138V
HD64F2138A
HD64F2138AV
HD6432137S
HD6432137SW
H8S/2134
HD6432134S
HD64F2134
HD64F2134V
HD64F2134A
HD64F2134AV
HD6432133S
HD6432132
HD64F2132R
HD64F2132RV
HD6432130
H8S/2137
H8S/2133
H8S/2132
H8S/2130
Rev. 4.00
Revision Date: Jun 06, 2006
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and
more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corp. product best suited to the customer's application; they do not convey any license
under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or
a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-
party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corp. without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or
an authorized Renesas Technology Corp. product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising
from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means,
including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Renesas
Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or
system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when
considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must
be exported under a license from the Japanese government and cannot be imported into a country
other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products
contained therein.
Rev. 4.00 Jun 06, 2006 page ii of liv
General Precautions on Handling of Product
1. Treatment of NC Pins
Note: Do not connect anything to the NC pins.
The NC (not connected) pins are either not connected to any of the internal circuitry or are
used as test pins or to reduce noise. If something is connected to the NC pins, the
operation of the LSI is not guaranteed.
2. Treatment of Unused Input Pins
Note: Fix all unused input pins to high or low level.
Generally, the input pins of CMOS products are high-impedance input pins. If unused pins
are in their open states, intermediate levels are induced by noise in the vicinity, a pass-
through current flows internally, and a malfunction may occur.
3. Processing before Initialization
Note: When power is first supplied, the product’s state is undefined.
The states of internal circuits are undefined until full power is supplied throughout the
chip and a low level is input on the reset pin. During the period where the states are
undefined, the register settings and the output state of each pin are also undefined. Design
your system so that it does not malfunction because of processing while it is in this
undefined state. For those products which have a reset function, reset the LSI immediately
after the power supply has been turned on.
4. Prohibition of Access to Undefined or Reserved Addresses
Note: Access to undefined or reserved addresses is prohibited.
The undefined or reserved addresses may be used to expand functions, or test registers
may have been be allocated to these addresses. Do not access these registers; the system’s
operation is not guaranteed if they are accessed.
Rev. 4.00 Jun 06, 2006 page iii of liv
Configuration of This Manual
This manual comprises the following items:
1. General Precautions on Handling of Product
2. Configuration of This Manual
3. Preface
4. Main Revisions for This Edition
The list of revisions is a summary of points that have been revised or added to earlier versions.
This does not include all of the revised contents. For details, see the actual locations in this
manual.
5. Contents
6 Overview
7. Description of Functional Modules
•
•
CPU and System-Control Modules
On-Chip Peripheral Modules
The configuration of the functional description of each module differs according to the
module. However, the generic style includes the following items:
i) Feature
ii) Input/Output Pin
iii) Register Description
iv) Operation
v) Usage Note
When designing an application system that includes this LSI, take notes into account. Each section
includes notes in relation to the descriptions given, and usage notes are given, as required, as the
final part of each section.
8. List of Registers
9. Electrical Characteristics
10. Appendix
Rev. 4.00 Jun 06, 2006 page iv of liv
Preface
The H8S/2138 Group and H8S/2134 Group comprise high-performance microcomputers with a
32-bit H8S/2000 CPU core, and a set of on-chip supporting functions required for system
configuration.
The H8S/2000 CPU can execute basic instructions in one state, and is provided with sixteen
internal 16-bit general registers with a 32-bit configuration, and a concise and optimized
instruction set. The CPU can handle a 16-Mbyte linear address space (architecturally 4 Gbytes).
Programs based on the high-level language C can also be run efficiently.
Single-power-supply flash memory (F-ZTAT™*) and mask ROM versions are available,
providing a quick and flexible response to conditions from ramp-up through full-scale volume
production, even for applications with frequently changing specifications.
On-chip peripheral functions include a 16-bit free-running timer (FRT), 8-bit timer (TMR),
watchdog timer (WDT), two PWM timers (PWM and PWMX), a serial communication interface
(SCI, IrDA), host interface (HIF), D/A converter (DAC), A/D converter (ADC), and I/O ports. An
2
I C bus interface (IIC) can also be incorporated as an option.
An on-chip data transfer controller (DTC) is also provided, enabling high-speed data transfer
without CPU intervention.
The H8S/2138 Group has all the above on-chip supporting functions, and can also be provided
with an IIC module as an option. The H8S/2134 Group comprises reduced-function versions, with
fewer TMR channels, and no PWM, HIF, IIC, or DTC modules.
Use of the H8S/2138 or H8S/2134 Group enables compact, high-performance systems to be
implemented easily. The comprehensive PC-related interface functions and 16
×
8 matrix key-scan
functions are ideal for applications such as notebook PC keyboard control and intelligent battery
and power supply control, while the various timer functions and their interconnectability (timer
2
connection), plus the interlinked operation of the I C bus interface and data transfer controller
(DTC), in particular, make these devices ideal for use in PC monitors. In addition, the combination
of F-ZTAT™* and reduced-function versions is ideal for applications such as system units in
which on-chip program memory is essential to meet performance requirements, product start-up
times are short, and program modifications may be necessary after end-product assembly.
This manual describes the hardware of the H8S/2138 Group and H8S/2134 Group. Refer to the
H8S/2600 Series and H8S/2000 Series Software Manual
for a detailed description of the
instruction set.
Note: * F-ZTAT (Flexible-ZTAT) is a trademark of Renesas Technology Corp.
Rev. 4.00 Jun 06, 2006 page v of liv
电源技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
