Model JP506S
Pico Xinger
6dB Directional Coupler
t
Rev. A
Description
The JP506S is a low profile 6dB directional coupler in an easy to use
surface mount package covering the WCDMA and other 3G applications.
The JP506S is ideal for inline split/combine amplifiers, for power injection,
and can be used in most high power designs. Parts have been subjected to
rigorous qualification testing and units are 100% tested. They are
manufactured using materials with x and y thermal expansion coefficients
compatible with common substrates such as FR4, G-10 and polyimide.
Features:
•
•
•
•
•
•
•
•
ELECTRICAL SPECIFICATIONS**
Frequency
GHz
2.0 - 2.3GHz
Low loss
High Directivity
Surface Mountable
Tape And Reel
Convenient Package
100% Tested
Lead Free
Mean
Coupling
dB
Insertion
Loss
dB Max
VSWR
Max : 1
Freq.
Sensitivity
dB Max
1.805 – 1.880
1.93 – 1.99
2.0 – 2.3
Directivity
dB Min
6.2 ± 0.5
6.0 ± 0.5
6.0 ± 0.5
Power
Handling
Watts
0.30
0.30
0.30
Θ
JC
ºC / Watt
1.22
1.22
1.22
Operating
Temp.
ºC
±0.20
±0.20
±0.20
18
18
20
20
20
20
35.2
35.2
35.2
-55 to +85
-55 to +85
-55 to +85
Outline Drawing
Top View (Near-side)
.250
±.010
[6.35
±0.25
]
**Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50
Ω
nominal impedance. Specifications subject to change without notice.
Side View
.036
±.004
[0.91
±0.10
]
Pin 2
Pin 2
Bottom View (Far-side)
4X .020
±.004
[0.51
±0.10
]
Pin 1
GND
Pin 1
.200
±.010
[5.08
±0.25
]
GND
Pin 4
Denotes
Array Number
Pin 3
.120
±.004
[3.05
±0.10
]
4X .034
±.004
SQ
[0.86
±0.10
]
Pin 3
.170
±.004
[4.32
±0.10
]
Pin 4
Dimensions are in Inches [Millimeters]
JP506S Mechanical Outline
Part is Symmetric About All Axis
Tolerances are Non-Cumulative
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model JP506S
Rev. A
Typical Performance: 1.7 GHz. to 2.4 GHz.
Coupling JP506S
-5.4
-10
Return Loss JP506S
-5.6
Return Loss (dB)
Coupling (dB)
-20
-5.8
-30
-6
-40
-6.2
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
Frequency (GHz)
-50
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
Frequency (GHz)
Directivity JP506S
-10
-1.2
Transmission Loss JP506S
Transmission Loss (dB)
-15
Directivity (dB)
-1.3
-20
-1.4
-25
-1.5
-30
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
Frequency (GHz)
-1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
Frequency (GHz)
COUPLING
Choice of a coupling value in an application normally
depends on the power level of the main (sampled) line.
For example, if the coupler is being used to monitor main
line power, the coupling value is selected to provide
sufficient power to the monitoring device and yet
minimize system loss. Note that any coupler reduces
power flowing in the main line by the amount coupled off;
a 10dB coupler reduces main line power by 1 dB (10%)
where a 20dB coupler reduces it by only 0.044dB (1%).
Anaren uses mean coupling and frequency sensitivity
with the coupling specification. The mean coupling value
is arrived at by periodically sampling the coupling value
over the specified band and averaging the readings.
Frequency sensitivity is the peak-to-peak variation in
coupling over the specified band.
VSWR & DIRECTIVITY
In directional couplers, directivity is specified in lieu of
isolation. Directivity is a measure of how well the coupled
power is isolated from reflections at the main line output
port. For example, open or short-circuiting the output port
of a coupler with 20dB directivity would only affect the
coupled output power by 1% and only 0.1% for 30dB
directivity. High directivity is especially important if the
coupler is being used to measure the VSWR of a device
at its output port.
In this application, accurate
measurements of forward and reverse power are
required.
In theory, VSWR and directivity characteristics of a
coupler are perfect; the input and output ports are
perfectly matched and no power is coupled to the isolated
port. In practice, factors associated with the design and
manufacturing processes limit VSWR and directivity. The
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model JP506S
Rev. A
VSWR & DIRECTIVITY (CONTINUED)
internal meandering of the coupled lines and limitations
of building perfect 50Ω transitions at the input and
output ports of the device are the most significant
factors against perfect VSWR and directivity. Typically,
VSWR and directivity of 1.15:1 and 20 dB respectively
are achieved in practice.
INSERTION LOSS
Coupler insertion loss is defined as the log of the input
power divided by the sum of the power at the two
output ports. In practice, typical loss is approximately
0.20 dB. Specification limits are somewhat higher due
to imperfect test conditions; surface mount couplers
must be tested in test fixtures, which negatively affect
results.
PIN CONFIGURATION
MOUNTING
For Xinger surface mount couplers to operate
optimally, there must be 50Ω transmission lines
leading to and from all of the RF ports. To ensure
proper electrical and thermal performance, there
must be a ground plane with 100% colder
connection underneath the part. If either of these
two conditions is not satisfied, insertion loss,
coupling, VSWR and directivity may not meet
published specifications.
SUGGESTED FOOTPRINT
To ensure proper electrical and thermal performance
there must be a ground plane with 100%
solder connection underneath the part
Part is Symmetric About All Axis
Mutiple
plated thru holes
to ground
.170
[4.32]
.034 TYP
[0.86]
.063 SQ TYP
[1.60]
50
Transmission
Line
.120
[3.05]
Dimensions are in Inches [Millimeters]
JP506S Mounting Footprint
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model JP506S
Rev. A
PACKAGING
Packaging follows EIA 481-2.
Xinger
®
Tape & Reel Diagram
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
