Datasheet> 器件分类 > 模拟混合信号IC> 放大器电路> SPT200AMH

文档预览

SPT200AMH: 产品描述SPT200AMH放大器基础信息： SPT200AMH是一款OPERATIONAL AMPLIFIER。常用的包装方式为TO-8 SPT200AMH放大器核心信息： SPT200AMH的最低工作温度是-55 °C，最高工作温度是125 °C。如何简单看一个放大器效率？看它的压摆率，SPT200AMH的标称压摆率有4000 V/us。 SPT200AMH的标称供电电压为15 V，其对应的标称负供电电压为-15 V。SPT200AMH的输入失调电压为25000 µV（输入失调电压：使运算放大器输出端为0V(或接近0V)所需加于两输入端之间的补偿电压。） SPT200AMH的相关尺寸： SPT200AMH拥有12个端子.其端子位置类型为：BOTTOM。 SPT200AMH放大器其他信息：其温度等级为：MILITARY。其对应的的JESD-30代码为：O-MBCY-W12。SPT200AMH封装的材料多为METAL。而其封装形状为ROUND。SPT200AMH封装引脚的形式有：CYLINDRICAL。其端子形式有：WIRE。; 产品类别模拟混合信号IC 放大器电路; 文件大小328KB，共4页; 制造商Signal Processing Technologies; 器件替换：SPT200AMH替换放大器

下载文档详细参数选型对比全文预览

SPT200AMH概述

SPT200AMH放大器基础信息：

SPT200AMH是一款OPERATIONAL AMPLIFIER。常用的包装方式为TO-8

SPT200AMH放大器核心信息：

SPT200AMH的最低工作温度是-55 °C，最高工作温度是125 °C。

如何简单看一个放大器效率？看它的压摆率，SPT200AMH的标称压摆率有4000 V/us。

SPT200AMH的标称供电电压为15 V，其对应的标称负供电电压为-15 V。SPT200AMH的输入失调电压为25000 µV（输入失调电压：使运算放大器输出端为0V(或接近0V)所需加于两输入端之间的补偿电压。）

SPT200AMH的相关尺寸：

SPT200AMH拥有12个端子.其端子位置类型为：BOTTOM。

SPT200AMH放大器其他信息：

其温度等级为：MILITARY。其对应的的JESD-30代码为：O-MBCY-W12。SPT200AMH封装的材料多为METAL。而其封装形状为ROUND。SPT200AMH封装引脚的形式有：CYLINDRICAL。

其端子形式有：WIRE。

SPT200AMH规格参数

参数名称	属性值
包装说明	TO-8
Reach Compliance Code	unknown
放大器类型	OPERATIONAL AMPLIFIER
标称共模抑制比	46 dB
最大输入失调电压	25000 µV
JESD-30 代码	O-MBCY-W12
负供电电压上限	-20 V
标称负供电电压 (Vsup)	-15 V
功能数量	1
端子数量	12
最高工作温度	125 °C
最低工作温度	-55 °C
封装主体材料	METAL
封装形状	ROUND
封装形式	CYLINDRICAL
认证状态	Not Qualified
标称压摆率	4000 V/us
供电电压上限	20 V
标称供电电压 (Vsup)	15 V
表面贴装	NO
技术	BIPOLAR
温度等级	MILITARY
端子形式	WIRE
端子位置	BOTTOM
Base Number Matches	1

文档预览

下载PDF文档

全文
预览

FAST SETTLING, WIDEBAND OPERATIONAL AMPLIFIER

General Description

The SPT200 operational amplifier achieves performance far

superior to that of other high performance op amps. A current

feedback design provides a bandwidth of DC-95MHz and an

unprecedented settling time of 18nsec to 0.1%. And since thermal

tail has been eliminated, the SPT200 can be depended upon to

settle fast and solidly maintain its level. Drive capability is also

impressive at 24V

and 100mA.

Using the SPT200 is as easy as adding power supplies and a

gain-setting resistor. The result is reliable, consistent perfor-

mance because such characteristics as bandwidth and settling

time are virtually independent of gain setting. Unlike conventional

op amp designs where the optimum gain bandwidth product

occurs at a high gain, minimum settling time at a gain of -1,

maximum slew rate at a gain of +1, et cetera, the SPT200 offers

predictable response at gain settings from

±1

±50.

This,

coupled with consistent performance from unit to unit with no

external compensation, makes the SPT200 a real time and cost-

saver in design and production situations alike.

Minimizing settling time was a design goal of the SPT200.

Settling time is one of the most demanding of all op amp

requirements since it is affected by the op amp’s bandwidth, gain

flatness, and harmonic distortion. The result of this effort is an

amplifier fast enough for the most demanding high speed D to A

converters and “flash” A to D converters.

The superior slew rate and rise and fall times of the SPT200

make it an ideal amplifier for a broad range of pulse, analog, and

digital applications. Flat gain and phase response from DC to

beyond 50MHz ensure distortion levels well below those of other

op amps. A full power bandwidth of 20MHz eliminates the need

for power buffers in many applications.

The SPT200 is constructed using thin film resistor/bipolar transis-

tor technology, and is available in the following versions:

SPT200AIH -25 to +85

°C

12-pin TO-8 can

SPT200AMH -55 to +125

°C

12-pin TO-8 can, features

burn-in and hermetic testing

Features

-3dB bandwidth of 95MHz

0.1% settling in 18ns

4000V/µs slew rate

Low distortion, linear phase

3.6ns rise and fall times

Direct replacement for CLC200

Fast, precision A to D, D to A conversion

Baseband and video communications

Radar, sonar, IF processors

Laser drivers, photodiode preamps

High-density buffering

Graphic CRT composite video drive amp

Applications

4755 Forge Road, Colorado Springs, Colorado 80907, USA

Phone: (719) 528-2300 FAX: (719) 528-2370 Website: http://www.spt.com E-Mail: sales@spt.com

SPT200AMH相似产品对比

	SPT200AMH	SPT200AIH
描述	Operational Amplifier, 1 Func, 25000uV Offset-Max, BIPolar, MBCY12, TO-8	Operational Amplifier, 1 Func, 25000uV Offset-Max, BIPolar, MBCY12, TO-8
包装说明	TO-8	TO-8
Reach Compliance Code	unknown	unknown
放大器类型	OPERATIONAL AMPLIFIER	OPERATIONAL AMPLIFIER
标称共模抑制比	46 dB	46 dB
最大输入失调电压	25000 µV	25000 µV
JESD-30 代码	O-MBCY-W12	O-MBCY-W12
负供电电压上限	-20 V	-20 V
标称负供电电压 (Vsup)	-15 V	-15 V
功能数量	1	1
端子数量	12	12
最高工作温度	125 °C	85 °C
最低工作温度	-55 °C	-25 °C
封装主体材料	METAL	METAL
封装形状	ROUND	ROUND
封装形式	CYLINDRICAL	CYLINDRICAL
认证状态	Not Qualified	Not Qualified
标称压摆率	4000 V/us	4000 V/us
供电电压上限	20 V	20 V
标称供电电压 (Vsup)	15 V	15 V
表面贴装	NO	NO
技术	BIPOLAR	BIPOLAR
温度等级	MILITARY	OTHER
端子形式	WIRE	WIRE
端子位置	BOTTOM	BOTTOM
Base Number Matches	1	1

SPT200AMH

SPT200AMH概述

SPT200AMH规格参数

文档预览

SPT200AMH相似产品对比

推荐资源