GEA-12631
g
Indoor Current Transformer
Model JAS-0C – 600V, 10kV BIL, 150 – 2000A
Window Diameter 4.00"
APPLICATION
Designed for indoor service; suitable for operating meters, relays
and control devices, on circuits not exceeding 600V line-to-line. It
is intended for use in switchboards and in switchgear equipment.
It may be used on higher voltage circuits with an insulated
conductor; refer to the Applications Information section of catalog
GEP-9186
REGULATORY AGENCY APPROVALS
UL Recognized File
…………………… E93779
CONTINUOUS THERMAL CURRENT
RATING FACTOR
30º C Ambient
………………………… 1.33
55º C Ambient
………………………… 1.00
WEIGHT
(approximate)
Transformer
REFERENCE DRAWINGS
Outline
INSULATION LEVEL
0.6kV; BIL 10kV full wave.
FREQUENCY
50-60 Hz
………………………… 9 lbs
……………… 0121C33703
JAS-0C DATA TABLE
Current
Ratio
(in Amps)
Pri:Sec
150:5
200:5
300:5
400:5
500:5
600:5
800:5
1000:5
1200:5
1500:5
1600:5
2000:5
ANSI Accuracy
Class, 60 Hz
Meter Class,
Relay
Burden
Class
1.2 thru B-0.2
0.6 thru B-0.2
0.3 thru B-0.2
0.3 thru B-0.5
0.3 thru B-0.5
0.3 thru B-1.8
0.3 thru B-1.8
0.3 thru B-1.8
0.3 thru B-1.8
0.3 thru B-1.8
0.3 thru B-1.8
0.3 thru B-1.8
C 10
C 15
C 25
C 35
C 45
C 50
C 70
C 80
C 50
C 20
C 20
C 20
Secondary
Winding
Resistance
(Ohms @ 75º C)
0.085
0.113
0.170
0.227
0.283
0.340
0.360
0.450
0.680
0.487
0.519
0.649
Catalog
Number
750X114107
750X114108
750X114109
750X114110
750X114111
750X114101
750X114102
750X114103
750X114104
750X114105
750X114112
750X114106
Construction and Insulation
The core and coil are enclosed in a case molded
with GE Valox® thermoplastic polyester resin.
This tough material has excellent electrical and
mechanical properties over a wide temperature
range and is resistant to oil and a variety of
chemicals.
Core and Coils
The core is made from high quality grain oriented
silicon steel, annealed under rigidly controlled
factory conditions. The secondary winding is made
of heavy enameled copper wire. The secondary
windings are evenly distributed around the core for
maximum accuracy and resistance to stray fields
from adjacent conductors.
Terminals
Secondary terminals are No, 8-32 brass studs with
one flat washer and one lock-washer and a
regular nut. Because the transformer is used
primarily in enclosed switchgear compartments
which cannot be opened while the transformer is
energized, a secondary shorting device and
terminal cover are not provided.
Polarity
Primary and secondary polarity marks H1 and X1
are molded into the case.
Primary Conductor
A bus or insulated cable forms the primary
winding.
Nameplates
The nameplate is a polyester label attached to the
face of the transformer.
Mounting
The transformer can be mounted in any position.
Maintenance
These transformers require no maintenance, other
than occasional cleaning if installed where air
contamination is severe.
Data subject to change without notice
To purchase or obtain more information about GE Instrument Transformer products, please call
GE’s Charlotte Service Center at 1-800-431-7867. Product information is also available on our
web site at
http://www.GEIndustrial.com.
Click on the Product Index button (right column), select
Transformers and follow the menus to
Product Information
or a
Solutions Advisor
JAS-0C Dimensions
g
pls 2.5M 12/01
130 Main Street
Somersworth, NH 03878
1907 Calumet Street
Clearwater, FL 33765
GE Industrial Systems
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
