FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12612-3E
8-bit Proprietary Microcontrollers
CMOS
F MC-8FX MB95130M Series
MB95136M/F133MS/F133NS/F133JS/F134MS/F134NS/F134JS/
MB95F136MS/F136NS/F136JS/F133MW/F133NW/F133JW/F134MW/
MB95F134NW/F134JW/F136MW/F136NW/F136JW/FV100D-103
■
DESCRIPTION
The MB95130M series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
Note : F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
2
■
FEATURES
•
F
2
MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instruction
• Bit manipulation instructions etc.
•
Clock
• Main clock
• Main PLL clock
• Sub clock (for dual clock product)
• Sub PLL clock (for dual clock product)
(Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system
development.
Copyright©2006 FUJITSU LIMITED All rights reserved
MB95130M Series
(Continued)
•
Timer
• 8/16-bit compound timer
• 8/16-bit PPG
• 16-bit PPG
• Timebase timer
• Watch prescaler (for dual clock product)
•
LIN-UART
• Full duplex double buffer
• Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
•
UART/SIO
• Full duplex double buffer
• Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
•
External interrupt
• Interrupt by edge detection (rising, falling, or both edges can be selected)
• Can be used to recover from low-power consumption (standby) modes.
•
8/10-bit A/D converter
• 8-bit or 10-bit resolution can be selected.
•
Low-power consumption (standby) mode
• Stop mode
• Sleep mode
• Watch mode (for dual clock product)
• Timebase timer mode
•
I/O port
• The number of maximum ports
•
Single clock product : 20 ports
•
Dual clock product : 18 ports
• Configuration
•
General-purpose I/O ports (COMS) : Single clock product : 20 ports
Dual clock product : 18 ports
•
Programmable input voltage levels of port
Automotive input level
/
CMOS input level
/
hysteresis input level
•
Flash memory security function
Protects the content of Flash memory (Flash memory device only)
2
MB95130M Series
■
MEMORY LINEUP
Flash memory
MB95F133MS/F133NS/F133JS
MB95F133MW/F133NW/F133JW
MB95F134MS/F134NS/F134JS
MB95F134MW/F134NW/F134JW
MB95F136MS/F136NS/F136JS
MB95F136MW/F136NW/F136JW
8 Kbytes
16 Kbytes
32 Kbytes
RAM
256 bytes
512 bytes
1 Kbyte
3
MB95130M Series
■
PRODUCT LINEUP
Part number
MB95F133MS MB95F133NS MB95F133MW MB95F133NW MB95F133JS MB95F133JW
MB95136M MB95F134MS MB95F134NS MB95F134MW MB95F134NW MB95F134JS MB95F134JW
MB95F136MS MB95F136NS MB95F136MW MB95F136NW MB95F136JS MB95F136JW
Parameter
Type
ROM capacity*
1
RAM capacity*
1
Reset output
Clock
system
Option*
2
Low voltage
detection
reset
Clock
supervisor
MASK ROM
product
Flash memory product
32 Kbytes (Max)
1 Kbyte (Max)
Yes
No
Dual clock
Single clock
Dual clock
Selectable
Single/Dual
clock*
3
Yes/No
Single clock
No
Yes
No
No
Yes
Yes
Yes
Number of basic instructions
: 136
Instruction bit length
: 8 bits
Instruction length
: 1 to 3 bytes
CPU functions
Data bit length
: 1, 8, and 16 bits
Minimum instruction execution time : 61.5 ns (at machine clock frequency 16.25 MHz)
Interrupt processing time
: 0.6
µs
(at machine clock frequency 16.25 MHz)
•
Single clock product : 20 ports
General-
•
Dual clock product : 18 ports
purpose
Programmable input voltage levels of port :
I/O port
Automotive input level
/
CMOS input level
/
hysteresis input level
Timebase
Interrupt cycle : 0.5 ms, 2.1 ms, 8.2 ms, 32.8 ms (at main oscillation clock 4 MHz)
timer
Reset generated cycle
Watchdog
At main oscillation clock 10 MHz
: Min 105 ms
timer
At sub oscillation clock 32.768 kHz (for dual clock product) : Min 250 ms
Wild register Capable of replacing 3 bytes of ROM data
Data transfer capable in UART/SIO
Full duplex double buffer, Variable data length (5/6/7/8-bit), built-in baud rate generator
UART/SIO NRZ type transfer format, error detected function
LSB-first or MSB-first can be selected.
Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
Dedicated reload timer allowing a wide range of communication speeds to be set.
Full duplex double buffer.
LIN-UART
Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
LIN functions available as the LIN master or LIN slave.
8/10-bit
A/D
8-bit or 10-bit resolution can be selected.
converter
(8 channels)
Peripheral functions
(Continued)
4
MB95130M Series
(Continued)
Part number
MB95F133MS MB95F133NS MB95F133MW MB95F133NW MB95F133JS MB95F133JW
MB95136M MB95F134MS MB95F134NS MB95F134MW MB95F134NW MB95F134JS MB95F134JW
MB95F136MS MB95F136NS MB95F136MW MB95F136NW MB95F136JS MB95F136JW
Parameter
Each channel of the timer can be used as "8-bit timer x 2 channels" or "16-bit timer x 1 channel".
Built-in timer function, PWC function, PWM function, capture function and square wave-form output
Count clock: 7 internal clocks and external clock can be selected.
PWM mode or one-shot mode can be selected.
16-bit PPG Counter operating clock: Eight selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as "8-bit PPG x 2 channels" or "16-bit PPG x 1 channel".
8/16-bit PPG
Counter operating clock: Eight selectable clock sources
Watch
counter
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
(for dual
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when selecting clock
clock
source 1 second and setting counter value to 60)
product)
Watch
prescaler
(for dual
Four selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
clock
product)
External
Interrupt by edge detection (rising, falling, or both edges can be selected.)
interrupt
Can be used to recover from standby modes.
(8 channels)
Supports automatic programming, Embedded Algorithm
TM
*
4
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Flash memory Data retention time : 20 years
Erase can be performed on each block
Block protection with external programming voltage
Flash Security Feature for protecting the content of the Flash
(MB95F136MS/F136NS/F136JS/F136MW/F136NW/F136JW)
Standby mode Sleep, stop, watch (for dual clock product), and timebase timer
*1 : For ROM capacity and RAM capacity, refer to “1. Memory space” in “■ CPU CORE”.
*2 : For details of option, refer to “■ MASK OPTION”.
*3 : Specify clock mode when ordering MASK ROM.
*4 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.
Note : Part number of evaluation product in MB95130M series is MB95FV100D-103.
When using it, the MCU board (MB2146-303A) is required.
Peripheral functions
8/16-bit
compound
timer
5
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
