1. The temperature of the component (ambient plus temperature rise) must
be within the stated operating temperature range.
2. The above transformers and inductors have been tested and approved
by Pulse’s power IC partners and are sited in the appropriate datasheet
or evaluation board documentation at these companies. To determine
which IC and IC partners are matched with the above Pulse part num-
bers please consult the IC Cross Reference on the Pulse website.
3. For flyback topology applications, it is necessary to ensure that the trans-
former will not saturate in the application. The peak flux density (Bpk)
should remain below 2700Gauss. To calculate the peak flux density use
the following formula:
Bpk (Gauss) = K1_Factor * Ipk(A)
4. In high volt-µsec applications, it is important to calculate the core loss of
the transformer. Approximate transformer core loss can be calculated as:
CoreLoss (W) = 2.98E-13 * (Freq_kHz)
1.63
* (DB_Gauss)
2.63
where
DB
can be calculated as:
For Flyback Topology:
DB
= K1_Factor *
D(A)
For Forward Topology:
DB
= K1_Factor * Volt-µsec
5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to
the part number (i.e. PA0700NL becomes PA0700NLT). Pulse complies
with industry standard tape and reel specification EIA481.
6. The “NL” suffix indicates an RoHS-compliant part number. Non-NL suf-
fixed parts are not necessarily RoHS compliant, but are electrically and
mechanically equivalent to NL versions. If a part number does not have
the “NL” suffix, but an RoHS compliant version is required, please con-
tact Pulse for availability.
IM
½½
½
½½½½½ ½½½
½½½½½
EL
½½½½½½½½½
½½½½½½½½½½½½½½½½½
½½½½½½½½½½½
PR
½½½½½½½½½
½½½½½
½½½½½½½½
½½½½
½½½½½
½½½½½
½
½½½½½
½½½½½
For more information:
Pulse Worldwide
Headquarters
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
IN
A
mechanical
½½
½
½½½½½
½½½½½
½½½
½½½½½
½½½½½
½
½½½½½½½½
½½½½
½½½½½
½½½½½
½
½½½½½
½½½½½
½
½½½½½½
½½½
½½½½½½½½½½
½½½½½½½½½½½
Pulse European
Headquarters
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Pulse China
Headquarters
TEL: 49 7032 7806 0
FAX: 49 7032 7806 12
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Rd.
High-Tech Zone
Nanshan District
Shenzen, PR China 518057
TEL: 86 755 33966678
FAX: 86 755 33966700
This is a “Preliminary” product data sheet. Products mentioned on this data sheet are in development and in the process of being qualified. These products are not fully
released nor are they in production. Features, specifications and performance of products offered are subject to change without notice. Other brand and product names
mentioned herein may be products and/or registered trademarks of their respective owners. For current information on this product, please contact the Pulse office
据外媒报道，萨里大学（University of Surrey）的研究人员开发出一种无需依赖GPS即可在人口密集的城市地区精确定位设备位置的人工智能系统。该系统可将定位误差从734米缩小到22米以内，这对于自动驾驶汽车和救援车辆等技术的发展意义重大。 图片来源： 萨里大学 在发表于《IEEE Robotics and Automation Letters》的论文中，研究人员介绍了PEn...[详细]
NXP MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
