2. MiniMOSORBt transient suppressors are normally selected according to the maximum working peak reverse voltage (V
RWM
), which
should be equal to or greater than the dc or continuous peak operating voltage level.
3. V
BR
measured at pulse test current I
T
at an ambient temperature of 25°C.
4. Surge current waveform per Figure 3 and derate per Figures 1 and 2.
*Not Available in the 5,000/Tape & Reel.
http://onsemi.com
3
SA5.0CA Series
NONREPETITIVE PULSE
WAVEFORM SHOWN IN
FIGURE 3
PEAK PULSE DERATING IN % OF
PEAK POWER OR CURRENT @ T = 25 C
A
°
100
PP K , PEAK POWER (kW)
10
100
80
60
40
20
0
0
25
50 75 100 125 150 175 200
T
A
, AMBIENT TEMPERATURE (°C)
1
0.1
0.1 ms
1 ms
10 ms
100 ms
1 ms
10 ms
t
p
, PULSE WIDTH
PD, STEADY STATE POWER DISSIPATION (WATTS)
Figure 1. Pulse Rating Curve
Figure 2. Pulse Derating Curve
5
4
3/8″
t
r
≤
10
ms
100
VALUE (%)
PEAK VALUE − I
PP
PULSE WIDTH (t
p
) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAYS TO 50%
OF I
PP
.
3/8″
3
HALF VALUE −
50
t
P
0
0
1
2
I
PP
2
2
1
0
3
4
t, TIME (ms)
0 25 50 75 100 125 150 175
200
T
L
, LEAD TEMPERATURE (°C)
Figure 3. Pulse Waveform
Figure 4. Steady State Power Derating
UL RECOGNITION*
The entire series including the bidirectional CA suffix has
Underwriters Laboratory Recognition
for the classification
of protectors (QVGV2) under the UL standard for safety
497B and File #E 116110. Many competitors only have one
or two devices recognized or have recognition in a
non-protective category. Some competitors have no
recognition at all. With the UL497B recognition, our parts
successfully passed several tests including Strike Voltage
Breakdown test, Endurance Conditioning, Temperature test,
Dielectric Voltage-Withstand test, Discharge test and
several more.
Whereas, some competitors have only passed a
flammability test for the package material, we have been
recognized for much more to be included in their protector
category.
*Applies to SA5.0A, CA
−
SA170A, CA.
http://onsemi.com
4
SA5.0CA Series
OUTLINE DIMENSIONS
Transient Voltage Suppressors
−
Axial Leaded
500 Watt Peak Power MiniMOSORB™
B
MINI MOSORB
CASE 59−09
ISSUE S
K
D
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 59−04 OBSOLETE, NEW STANDARD 59−09.
4. 59−03 OBSOLETE, NEW STANDARD 59−10.
5. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY.
6. POLARITY DENOTED BY CATHODE BAND.
7. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
DIM
A
B
D
K
INCHES
MIN
MAX
0.228
0.299
0.102
0.142
0.028
0.034
1.000
−−−
MILLIMETERS
MIN
MAX
5.80
7.60
2.60
3.60
0.71
0.86
25.44
−−−
K
MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC.
ON Semiconductor
and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone:
303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax:
303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email:
orderlit@onsemi.com
N. American Technical Support:
800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature:
http://www.onsemi.com/orderlit
For additional information, please contact your local
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
