THNIDxxxxBx Series
NAND Flash Drive
Rev1.7
--- THNIDxxxxBx Series ---
Outline
The THNIDxxxxBx NAND Flash Drive series from Toshiba features an IDE interface, a flash disk controller chip,
and NAND-type flash memory devices. There are two form factors, 2.5 inch-type and 3.5 inch-type, available in the
series. The THNIDxxxxBx is available in 16 MB, 32 MB, 64 MB, 128 MB, 192 MB, 256 MB, 320 MB, 384 MB, 512
MB, 640 MB, 1024 MB, 1536 MB and 2048 MB capacities in each type. The drives operate with a 5-volts power
supply and support Mode 4 PIO data transfer.
The NAND Flash Drive is geared specifically to the industrial market for use in ATM, factory automation
machine, POS terminal, measuring product, ticket-vending machine, parking system and other industrial products
that require high tolerance to environmental condition.
Features
•
•
•
Capacity
16MB up to 2GB
Form factor
2.5 inch-type, 3.5 inch-type, (HDD compatible)
IDE interface
Mode4 PIO
ATA command set compatible
Power supply
V
CC
=
5.0 V
±
10%
Operating temperature
−40°C~85°C
(Industrial grade : THNIDxxxxBxI)
0°C~70°C (Commercial grade : THNIDxxxxBx)
Performance
Burst data transfer rate (Drive-Host)
16.6 MB/sec. (max)
Sustained write speed
3.2 MB/sec. (max)
Sustained read speed
6.5 MB/sec. (max)
Shock
Vibration
9800 m/s
2
(max)
[Non-operating]
147 m/s
2
peak (25~2000 Hz) [Operating]
•
•
•
000707EBA1
•
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
•
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
•
The products described in this document are subject to the foreign exchange and foreign trade laws.
•
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
•
The information contained herein is subject to change without notice.
2002-06-11
1/23
THNIDxxxxBx Series
Product Specification
•
•
Storage Capacities:
16, 32, 64, 128, 192, 256, 320, 384, 512, 640, 1024, 1536, 2048 Mbytes (unformatted)
Performance:
To/from host
16.6 Mbytes/sec. (max theoretical)
Sustained write
3.2 Mbyte/sec. (max) [ATA PIO mode 4] (≥64 MB)
1.5 Mbyte/sec. (max) [ATA PIO mode 4] (16 MB~32 MB)
Sustained read
6.5 Mbyte/sec. (max) [ATA PIO mode 4]
Operating Voltage:
5V
+/−
10%
Power Consumption:
Read mode
51 mA (typ)
Write mode
43 mA (typ)
Idle mode
16 mA (typ)
Sleep mode
1 mA (typ) (≤64 MB)
3 mA (typ) (2 GB)
Environmental Specification:
Operating temperature
−40°C
to 85°C (Industrial grade : THNIDxxxxBxI)
0°C to 70°C (Commercial grade : THNIDxxxxBx)
Storage temperature
−40°C
to 85°C (Industrial grade : THNIDxxxxBxI)
−20°C
to 85°C (Commercial grade : THNIDxxxxBx)
Humidity
95% (max) [No condensation]
Shock
9800 m/s
2
(max) (3 axis) [No-operating]
Vibration
147 m/s
2
peak (25Hz~2000Hz) [Operating]
Reliability:
Error rate
<1 bit/10
15
bit read
ECC
1 bit error connection
Rev1.7
•
•
•
•
2002-06-11
3/23
ADI 工业技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
