电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索

177-710-1-100GS0J7-24PNN

产品描述Interconnection Device,
产品类别连接器    连接器   
文件大小436KB,共4页
制造商Glenair
官网地址http://www.glenair.com/
下载文档 详细参数 全文预览

177-710-1-100GS0J7-24PNN概述

Interconnection Device,

177-710-1-100GS0J7-24PNN规格参数

参数名称属性值
是否无铅含铅
是否Rohs认证不符合
Reach Compliance Codenot_compliant
连接器类型INTERCONNECTION DEVICE
Base Number Matches1

文档预览

下载PDF文档
MWDM Micro-D Shielded Cable Assemblies
Single-Ended or Double-Ended–These
easy-to-order cable
assemblies eliminate the need for expensive assembly
labor. 100% tested and ready for use.
Now With Twisted Pairs–No
need to create a procurement
specification for Micro-D cables with twisted pairs. Glenair
177-740 cables are furnished with a full complement of
white/blue twisted pair wires.
Integral Shield Termination–The
connector shell has a
platform to accept Band-It shield termination bands. The
cable shield braid is attached directly to the connector.
Save Labor, Reduce Weight and Improve EMI Shielding with
Glenair’s Micro-D Shielded Cable Assemblies
Aerospace electronics systems require higher and higher levels of protection from radiated emissions. Glenair’s fully
shielded Micro-D cable assemblies meet this need. The cable shield is attached directly onto the one-piece connector
shell and secured with a stainless steel
BAND-IT
® clamp. These pre-wired, 100% tested assemblies meet the
requirements of MIL-DTL-83513. An optional ground spring on the pin connector assures low shell-to-shell resistance.
Available with a variety of wire types and shields, Micro-D shielded assemblies can be ordered in any length, either
single-ended or “back-to-back”.
Ground Spring and EMI Shielding Effectiveness
– A gold-plated
stainless steel ground spring on the pin connector mating face offers
substantial improvement in EMI protection. The graphs compare
identical connectors tested with and without ground springs.
EMI Performance with Ground Spring
SHIELDING EFFECTIVENESS (DB)
SHIELDING EFFECTIVENESS (DB)
100
90
80
70
60
50
40
30
20
10
0
1.00E+03
100
90
80
70
60
50
40
30
20
10
0
1.00E+03
EMI Performance without Ground Spring
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
FREQUENCY (Hz)
FREQUENCY (Hz)
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
B-8
E-Mail: sales@glenair.com
想学习linux嵌入式开发,请教学习方法和教材
想学习linux嵌入式开发,请教学习方法和教材...
hilin029 Linux开发
学艺不精,说说MSP430使用硬件SPI遇到的坑
本帖最后由 littleshrimp 于 2017-4-16 10:09 编辑 这几天在用74HC595驱动8位数码管,之间用CC2541做过驱动都很正常PCB就按照以前的画了,这次单片机使用了MSP430G25538位数码管使用2片74HC5 ......
littleshrimp 微控制器 MCU
不一样的51教程 之二 51的“芯”里
上一篇我讲了几个基本概念,很可惜,它对于你马上点亮LED没有任何帮助,而这一篇,我要讲的是51芯片内部的东西,比如 存储器,然后我还会讲一下51,或者说任何CPU是如何工作的——当然只是一 ......
辛昕 51单片机
USB Function总线驱动是在那里加载其DefaultClientDriver?
MSDN上说在 注册表项加个DefaultClientDriver注册表项,在机器启动的时候即可加载该Client Driver.但是我找遍了所有的代码,就是没找到是在那里启动DefaultClientDriver的?...
futterfly 嵌入式系统
STM32定时器(自动重装)经验分享
本帖最后由 annysky2012 于 2021-2-5 14:19 编辑 有网友在论坛发帖求教,定时器明明初始化时设置的定时值是1us,而自己设置定时值(1S)以后,而实际为4s。 网友帖子(https://bbs.eeworl ......
annysky2012 stm32/stm8
Launch函数问题,高手请进
这一段是源代码 LEAF_ENTRY Launch ldr r2, = PhysicalStart ldr r3, = (VIR_RAM_START - PHY_RAM_START) sub r2, r2, r3 mov r1, #0x0070 ; Di ......
liuxp_008 嵌入式系统

 
EEWorld订阅号

 
EEWorld服务号

 
汽车开发圈

 
机器人开发圈

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程 索引文件: 803  1835  1923  2863  1247  17  37  39  58  26 

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved