Datasheet> 器件分类 > 无源元件> 电容器> C1210C151JGRAL3325

文档预览

C1210C151JGRAL3325: 产品描述Ceramic Capacitor, Ceramic, 2000V, 5% +Tol, 5% -Tol, X7R, -/+15ppm/Cel TC, 0.00015uF, 1210,; 产品类别无源元件电容器; 文件大小1014KB，共20页; 制造商KEMET(基美); 官网地址http://www.kemet.com

下载文档详细参数全文预览

C1210C151JGRAL3325概述

Ceramic Capacitor, Ceramic, 2000V, 5% +Tol, 5% -Tol, X7R, -/+15ppm/Cel TC, 0.00015uF, 1210,

C1210C151JGRAL3325规格参数

参数名称	属性值
是否Rohs认证	不符合
Objectid	711653949
包装说明	, 1210
Reach Compliance Code	not_compliant
ECCN代码	EAR99
YTEOL	5.59
电容	0.00015 µF
电容器类型	CERAMIC CAPACITOR
介电材料	CERAMIC
高度	1.7 mm
JESD-609代码	e0
长度	3.2 mm
负容差	5%
端子数量	2
最高工作温度	125 °C
最低工作温度	-55 °C
封装形式	SMT
包装方法	Bulk
正容差	5%
额定（直流）电压（URdc）	2000 V
尺寸代码	1210
温度特性代码	X7R
温度系数	15% ppm/°C
端子面层	Tin/Lead (Sn90Pb10) - with Nickel (Ni) barrier
宽度	2.5 mm

C1210C151JGRAL3325文档预览

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

High Voltage X7R Dielectric, 500VDC–3000VDC

(Commercial & Automotive Grade)

Overview

KEMET’s high voltage surface mount MLCCs in X7R dielectric

feature a 125°C maximum operating temperature and are

considered “temperature stable.” The Electronic Industries

Alliance (EIA) characterizes X7R dielectric as a Class II material.

Components of this classification are fixed, ceramic dielectric

capacitors suited for bypass and decoupling applications or

for frequency discriminating circuits where Q and stability of

capacitance characteristics are not critical. X7R exhibits a

predictable change in capacitance with respect to time and

voltage and boasts a minimal change in capacitance with

reference to ambient temperature. Capacitance change is limited

to ±15% from -55°C to +125°C.

Available in a variety of case sizes and industry-leading CV

values (capacitance/voltage), these devices exhibit low leakage

current and low ESR at high frequencies. Conventional uses

include both snubbers and filters in applications such as

switching power supplies and lighting ballasts. Their exceptional

performance at high frequencies has made high voltage MLCCs

the preferred dielectric choice of design engineers worldwide. In

addition to their use in power supplies, these capacitors

are widely used in industries related to automotive (hybrid),

telecommunications, medical, military, aerospace, semiconductors

and test/diagnostic equipment.

Automotive Grade is available for applications requiring proven,

reliable performance in harsh environments. Whether under-hood

or in-cabin, these capacitors are designed for mission and safety

critical automotive circuits. Stricter testing protocol and inspection

criteria have been established for Automotive Grade products

in recognition of potentially harsh environmental conditions.

KEMET Automotive Grade series capacitors meet the demanding

Automotive Electronics Council's AEC-Q200 qualification

requirements and are manufactured in state-of-the-art ISO/TS

16949:2002 certified facilities.

Ordering Information

Ceramic

1210

154

Capacitance

Code (pF)

2 Sig. Digits +

Number of Zeros

Capacitance

Tolerance

J = ±5%

K = ±10%

M = ±20%

Voltage

C = 500V

B = 630V

D = 1000V

F = 1500V

G = 2000V

Z = 2500V

H = 3000V

Dielectric

R = X7R

Packaging/Grade

(C-Spec)

Blank = Bulk

TU = 7" Reel

Unmarked

TM = 7" Reel Marked

AUTO = Automotive

Grade 7" Reel

Unmarked

Case Size Specification/

(L" x W")

Series

0805

1206

1210

1808

1812

1825

2220

2225

C = Standard

Failure Rate/

Termination Finish

Design

A = N/A

C = 100% Matte Sn

L = SnPb (5% min)

Additional termination finish options may be available. Contact KEMET for details.

SnPb termination finish option is not available on Automotive Grade product.

Additional reeling or packaging options may be available. Contact KEMET for details.

1, 2

One WORLD

One Brand

One Strategy

One Focus

One Team

One KEMET

C1010_X7R_HV_SMD • 12/7/2011

Surface Mount Multilayer Ceramic Chip Capacitors, (SMD MLCCs)

High Voltage X7R Dielectric, 500VDC–3000VDC (Commercial & Automotive Grade)

Dimensions – Millimeters (Inches)

EIA

Size

Code

0805

1206

1210

1808

1812

1825

2220

2225

Metric

Size

Code

2012

3216

3225

4520

4532

4564

5650

5664

Length

2.00 (.079) ± 0.20 (.008)

3.20 (.126) ± 0.20 (.008)

4.70 (.185) ± 0.50 (.020)

4.50 (.177) ± 0.30 (.012)

5.70 (.224) ± 0.40 (.016)

5.60 (.220) ± 0.40 (.016)

Width

Thickness

Bandwidth

0.50 (0.02) ± 0.25 (.010)

0.60 (.024) ± 0.35 (.014)

Separation

Min.

0.75 (.030)

Mounting

Technique

Solder Wave or

Solder Reflow

1.25 (.049) ± 0.20 (.008)

1.60 (.063) ± 0.20 (.008)

2.50 (.098) ± 0.20 (.008)

2.00 (.079) ± 0.20 (.008) See Table 2 for

Thickness

3.20 (.126) ± 0.30 (.012)

6.40 (.252) ± 0.40 (.016)

5.00 (.197) ± 0.40 (.016)

6.40 (.248) ± 0.40 (.016)

N/A

Solder Reflow Only

Benefits

•

-55°C to +125°C operating temperature range

Industry-leading CV values

Exceptional performance at high frequencies

Pb-Free and RoHS compliant

EIA 0805, 1206, 1210, 1808, 1812, 1825, 2220 and

2225 case sizes

• DC voltage ratings of 500V, 630V, 1KV, 1.5KV, 2 KV,

2.5 KV and 3 KV

• Capacitance offerings ranging from 10pF to 0.33μF

Available capacitance tolerances of ±5%, ±10% and ±20%

Low ESR and ESL

Non-polar device, minimizing installation concerns

Commercial and Automotive (AEC-Q200) Grades available

100% pure matte tin-plated termination finish allowing for

excellent solderability

• SnPb plated termination finish option available upon request (5%

minimum)

•

Applications

Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubber circuits, output filters), high

voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in Ćuk

converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical

equipment/control, LAN/WAN interface, analog and digital modems, and automotive (electric and hybrid vehicles, charging stations and

lighting) applications.

Application Note

X7R dielectric is not recommended for AC line filtering or pulse applications.

C1010_X7R_HV_SMD • 12/7/2011

Surface Mount Multilayer Ceramic Chip Capacitors, (SMD MLCCs)

High Voltage X7R Dielectric, 500VDC–3000VDC (Commercial & Automotive Grade)

Qualification/Certification

Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in

Table 4, Performance & Reliability.

Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test

methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional

information regarding the Automotive Electronics Council and AEC-Q200, please visit their website at www.aecouncil.com.

Environmental Compliance

Pb-Free and RoHS compliant (excluding SnPb termination finish option)

Electrical Parameters/Characteristics

Item

Operating Temperature Range

Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC)

Aging Rate (Max % Cap Loss/Decade Hour)

Dielectric Withstanding Voltage

Dissipation Factor (DF) Maximum Limit @ 25ºC

Insulation Resistance (IR) Limit @ 25°C

-55°C to +125°C

±15%

3.0%

150% of rated voltage for voltage rating of < 1,000V

120% of rated voltage for voltage rating of ≥ 1,000V

(5 ± 1 seconds and charge/discharge not exceeding 50mA)

2.5%

See Insulation Resistance Limit Table

(500VDC applied for 120 ± 5 seconds @ 25°C)

Parameters/Characteristics

Regarding aging rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.

To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.

Capacitance and dissipation factor (DF) measured under the following conditions:

1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance ≤10µF

120Hz ± 10Hz and 0.5 ± 0.1 Vrms if capacitance >10µF

Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as

Automatic Level Control (ALC). The ALC feature should be switched to "ON."

C1010_X7R_HV_SMD • 12/7/2011

Surface Mount Multilayer Ceramic Chip Capacitors, (SMD MLCCs)

High Voltage X7R Dielectric, 500VDC–3000VDC (Commercial & Automotive Grade)

Post Environmental Limits

High Temperature Life, Biased Humidity, Moisture Resistance

Dielectric

X7R

Rated DC Voltage Capacitance Value

>25

16/25

<16

All

DF (%)

3.0

5.0

7.5

Cap Shift

± 20%

10% of Initial Limit

Insulation Resistance Limit Table (X7R Dielectric)

EIA Case Size

0805

1206

1210

1808

1812

1,000 Megohm

Microfarads or 100GΩ

< .0039µF

< 0.012µF

< 0.033µF

< 0.018µF

< 0.027µF

100 Megohm

Microfarads or 10GΩ

≥ .0039µF

≥ 0.012µF

≥ 0.033µF

≥ 0.018µF

≥ 0.027µF

C1010_X7R_HV_SMD • 12/7/2011

Surface Mount Multilayer Ceramic Chip Capacitors, (SMD MLCCs)

High Voltage X7R Dielectric, 500VDC–3000VDC (Commercial & Automotive Grade)

Table 1A – Capacitance Range/Selection Waterfall (0805–1812 Case Sizes)

Cap

10 pF

11 pF

12 pF

13 pF

15 pF

16 pF

18 pF

20 pF

22 pF

24 pF

27 pF

30 pF

33 pF

36 pF

39 pF

43 pF

47 pF

51 pF

56 pF

62 pF

68 pF

75 pF

82 pF

91 pF

100 pF

110 pF

120 pF

130 pF

150 pF

180 pF

220 pF

270 pF

330 pF

390 pF

470 pF

560 pF

680 pF

820 pF

1,000 pF

1,200 pF

1,500 pF

1,800 pF

2,000 pF

2,200 pF

2,700 pF

3,300 pF

3,900 pF

4,700 pF

5,600 pF

6,800 pF

8,200 pF

10,000 pF

12,000 pF

Cap

Code

100

110

120

130

150

160

180

200

220

240

270

300

330

360

390

430

470

510

560

620

680

750

820

910

101

111

121

131

151

181

221

271

331

391

471

561

681

821

102

122

152

182

202

222

272

332

392

472

562

682

822

103

123

Series

Voltage Code

Voltage DC

Cap Tolerance

C0805

C1206

C1210

C1808

C1812

500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000

Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions

Voltage DC

500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000

Cap

Voltage Code C

Code

Series

C0805

C1206

C1210

C1808

C1812

KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within

the same form factor (configuration and dimensions).

C1010_X7R_HV_SMD • 12/7/2011

Roll Over for

Order Info.

查看更多（仅显示前5页内容，查看全部内容请下载文档。）>

推荐资源

由集成稳压器CW7800构成的功率调幅器电路

微弱(脉搏)信号放大电路

求购Tektronix/泰克混合信号示波器DPO4104B-L: 求购Tektronix/泰克混合信号示波器DPO4104B-L 大家都知道Tektronix/泰克混合信号示波器DPO4104B-L 1G带宽4个模拟通道5GS/s 取样速率 20M点记录长度，我正好需要一台，实验室应用东莞市捷鑫仪 ......; luoping6 电源技术

“再见2019，你好2020”+2020再接再厉: 在过去的一年里: 审视自己一年来的工作，总结一年的得失，感触很多。一年来，我热衷于本职工作，严格要求自己，摆正自己的工作位置，时刻保持“谦虚”、“谨慎”、&ldq ......; shihang1203 聊聊、笑笑、闹闹

定时器初值计算时该用65536还是65535？: 如题！ ...; qxb261089 51单片机

【R7F0C809】R7F0C809 按键扫描配合4位8段数码管显示例程解析: 由于本人的这次的项目是数字时钟，所以特别研究了一下按键扫描和显示的关系。现在把我研究过程中的两个疑点写出来，以防别人走弯路。其实所有例程都在：http://cn.renesas.com/products/m ......; ddllxxrr 瑞萨MCU/MPU

busybox怎样改变OMAP开发板的文件系统: 请问busybox怎样改变OMAP开发板的文件系统?需要哪些步骤...; wyli001 嵌入式系统

电路图: 这是电路图...; 376039329 单片机

关于STM32空闲中断

在使用串口接受字符串时，可以使用空闲中断（IDLEIE置1，即可使能空闲中断），这样在接收完一个字符串，进入空闲状态时（IDLE置1）便会激发一个空闲中断。在中断处理函数，我们可以解析这个字符串。需要注意的是，IDLE标志位需要软件清零，否则由于会不断进入中断，而使正常程序无法运行。当再次收到数据时（即RXNE再次置1），等到空闲便会重新进入中断。在STM32F4中，IDLE标志位清零的...[详细]
告别传统修复手段，冷凝器管板腐蚀保护的正解打开方式

一、设备概述列管式换热器是现有化工蒸发和加热设备中常用的热交换设备之一，在目前的现有技术中，列管式换热器管板材质均是采用碳钢为主，部分为碳钢衬胶结构，存在的问题是耐温性差、可靠性差、容易发生管板腐蚀问题和胶层脱落问题。列管式换热器是利用循环冷却水的温度来控制壳程介质温度的，在运行过程中当壳程介质温度高时靠换热器对壳程介质进行降温，冷却循环水在管束内流动，壳程介质在壳体内管束外流动，通过两者的...[详细]
倒装焊与球栅阵列封装：电子行业的关键技术

倒装焊(Flip-Chip)和球栅阵列封装（Ball Grid Array，简称BGA）是电子行业中广泛使用的两种封装技术。这两种封装技术各有优势和局限性，而且在某些情况下，它们可以互相补充，以满足更复杂的设计需求。首先，我们来了解倒装焊。倒装焊是一种封装技术，其中半导体芯片被“倒装”并直接焊接到电路板或基板上。这种方法使得芯片的主动元件面对着基板，可以直接与其接触，从而提高了热性能和电性...[详细]
基于NiosⅡ+SOPC的LCD显示系统设计

Nios Ⅱ是一种可配置的16/32位RISC处理器，它结合丰富的外设专用指令和硬件加速单元可以低成本地提供极度灵活和功能强大的 SOPC 系统，开发者根据实际需要自行整合。ALTEra 公司所有主流FPGA 器件都支持Nios Ⅱ。将LCD驱动与Nios Ⅱ相结合可以得到一个扩展性强、通用的IP核，从而解决不同型号液晶屏之间的驱动差异问题。 1 NiosⅡ 软核处理器和 SOPC 设...[详细]
电动汽车系统中发动机与变速箱的联系

想要理解汽车发动机为什么需要变速箱，首先要理解不同类型的发动机有什么特点。发动机指能够将一种能量形态转化为动能的机器，是一种笼统的概念性定义，并不特指某一种动力元。能定义为发动机的机器有：外燃式发动机、内燃式发动机、涡扇发动机、蒸汽轮机以及电动机等，其中内燃式发动机则是一般理解的发动机，是燃油动力汽车使用的动力元。普通家用汽车使用的内燃机为汽油动力发动机，这种机器的运行步骤为：进气喷油、压缩蒸发...[详细]
基于FPGA的便携式逻辑分析仪设计

Logic analyzers are widely used tools in digital design verification and debugging. They can verify the proper functioning of digital circuits and help users identify and troubleshoot faults. They ...[详细]
宝马将全景天窗改造成电视几乎覆盖整个车顶

据外媒报道，宝马（BMW）刚刚获得了一项屏幕专利，该屏幕可以覆盖整个车顶。宝马希望将车辆顶棚（headliner）至少大部分变成显示屏。宝马指出全景玻璃天窗存在重量过大、安全性不足、以及导致座舱过热等问题，因此将这块巨型屏幕作为普通玻璃的潜在升级选项。（图片来源：宝马公司）该曲面显示屏幕将覆盖车辆顶棚90%以上的面积。当乘客仰视时，其视野主体将由屏幕占据。该屏幕并非用于娱乐内容播放或...[详细]
stm32内部Flash的读写操作

stm32的产品都有内置Flash，而且不同系列的产品其内置Flash的大小不尽相同，结构上也有差异，本文将对stm32f07x，stm32f10x，stm32f40x的内置Flash结构，以及如何进行读写操作做一个介绍。一、特性与构成 1.stm32f07x系列 2、stm32f10x系列　　　　　　　　　　3、stm32f40x系列　...[详细]
stm32相关笔记——ADC部分

我们在学习一门技术的时候，应该对它的理论部分有所了解，然后才能在实践中进一步加深理解，进而掌握。对于stm32来说，我认为学习的时候应该先仔细阅读相关的参考手册，然后再动手实践，这样才能理解得更加透彻，掌握得更加牢固！今天记录一下我学习stm32的ADC部分的了解。 1.介绍小结：stm32的ADC有18个通道（16个外部通道+2个内部通道），有单次、连续、扫描和间断四种模式，ADC...[详细]
微波炉解决方案终见天日！

　　自20世纪40年代中期诞生以来，微波炉从无到有，用于商业，60年代，进入家庭并迅速普及，其基本功能与操作并未发生较大改变。实际上，其体现的唯一主要优势就是用户体验得到不断改善，能够包含越来越多的功能。　　而如今，微波炉已经像洗衣机一样成了家庭的基本家用电器，入住千家万户。许多人只熟悉它的功能，享受给人们带来方便的同时，有多少人去反问它的所以然的了?即便你是一位电子达人，也有你不知道的…...[详细]
汽车电子的关键是什么

车辆采用的电子系统IC复杂性逐渐提高，希望借由执行人工智能（AI）算法控制自驾功能，同时也需满足《道路车辆功能安全ISO 26262》标准（以下简称《ISO 26262》）要求。因此，IC设计公司也正快速采用完整性的测试解决方案，以便达到相关标准要求。确保车辆电子能稳定的作法之一就是在功能运转期间执行定期测试，也就是在逻辑与存储器利用内建自我测试（Built-in Self Test;BI...[详细]
stm32启动过程

startup_stm32f10x_cl.s 互联型的STM32F105xx，STM32F107xx startup_stm32f10x_hd.s 大容量的STM32F101xx，STM32F102xx，STM32F103xx startup_stm32f10x_hd_vl.s 大容量的STM32F100xx startup_stm32f10x_ld.s 小容量的STM32F101xx，STM3...[详细]
串联逆变器与并联逆变电源有什么不同，先开通后关断

串联逆变器和并联逆变器的区别在于使用不同的振荡电路。串联逆变器将L、R和c串联，并联逆变器将L、R和c并联。串联逆变器与并联逆变电源有哪些区别串联逆变器的负载电路具有低阻抗。需要电压源电源，大滤波电容器应并联在DC电源端子上。如果逆变器发生故障，由于浪涌电流大，很难提供保护。并联逆变器的负载电路呈现高阻抗，需要电流源供电。大型电抗器应串联在DC电力终端。如果逆变器发生故障，很容易提...[详细]
电动汽车已成为趋势，混合动力汽车何去何从

随着环保意识的增长，三电技术不断的完善和基础设施如充电桩的布局力度加大，对于新能源汽车来说，新能源汽车电动化势在必行。对于混动汽车来说还能挺多久？从当下的情况来看，对于不限购或者是限购的城市，纯电电动汽车和插电混动车都可以选。混动在结构上面有着两套动力系统，一旦车子没电了会用油。而对比纯电动汽车来说，纯电动汽车依靠电能来行驶，对于车辆而言行驶安静，无噪音，从车辆的保养的费用也会相对划算。单...[详细]
车规级芯片与消费级芯片的多方位差异分析

引言车规级芯片与手机（移动/消费级）芯片作为应用于截然不同领域的电子核心器件，其设计理念、制造要求、性能指标和应用约束存在显著差异。车规级芯片的核心诉求是极高的可靠性、功能安全和长生命周期保障；而手机芯片则优先追求峰值性能、能效比（PPA）和快速迭代能力。这种根本差异源于汽车电子系统严苛的运行环境、攸关人身安全的重大责任属性以及汽车作为耐用消费品的长期使用特性，与手机等消费电子产品相...[详细]

器件捷径: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多