Product Specification
108-60036
AMP Connector
AMPLIMITE* .050 Series I, Board to Board
Lead Free Version
1.
Scope:
This specification covers the requirements for product performance, test
methods and quality assurance provisions of AMPLIMITE* .050 Series I,
Board-to-Board Connector of the following part numbers.
Product No
X-5173277-X
X-5173278-X
X-5173279-X
X-5173280-X
X-5174207-X
X-5174214-X
X-5174215-X
X-5174216-X
X-5174217-X
X-5174218-X
X-5174681-X
X-5174682-X
X-5174683-X
X-5174684-X
X-5175710-X
X-5175711-X
X-5178857-X
X-5179359-X
Product Descriptions
Horizontal Plug Ass’ y
Horizontal Cap Ass’ y
Vertical Plug Ass’ y
Vertical Cap Ass’ y
Horizontal Plug Ass’ y
Horizontal Cap Ass’ y
Vertical Plug Ass’ y
Vertical Cap Ass’ y
Horizontal Plug Ass’ y
Horizontal Cap Ass’ y
Vertical Plug Ass’ y
Horizontal Plug Ass’ y
Vertical Cap Ass’ y
Horizontal Cap Ass’ y
Vertical Plug Ass’ y
Vertical Cap Ass’ y
Vertical Cap Ass’ y
Vertical Cap Ass’ y
DR
CHK
APP
1.1 Contents
Mounting
Type
Screw-on
Screw-on
Screw-on
Screw-on
Retention Leg
Free Standing
Free Standing
Free Standing
Retention Leg
Retention Leg
w/Kink
w/Kink
w/Kink
w/Kink
w/Kink
w/Kink
w/Kink
w/Kink
Remarks
w/Polarity Post (L, C, P)
Side Cut Type
C. WANG
S. YAO
I. ENOMOTO
NO
Tyco Electronics
AMP Shanghai Ltd
108-60036
REV
O
LOC
ES
PAGE
DIST
TITLE
O
LTR
RELEASED FB00-0268-04
C.W
20AUG
REVISION RECORD
DR
DATE
1 of 7
AMP Connector, Amplimite*.050 Series I BTB
Connector Lead Free Version
ASHL-0004-ES REV
A
The difference of the thickness of gold-plating is classified by the prefix number,
and the contact position is so with
the suffix numbers.
Fig. 1
2. Type of the Products:
The type of the products and their state of application are shown below.
Tyco Electronics
AMP Shanghai Ltd
ASHL-0005- ES REV A
PAGE NO
2
108-60036
REV LOC
O
ES
3. Applicable Documents:
The following documents form a part of this specification to the extent specified
here in. In the event of conflict between the requirements of this specification
and the product drawing, the product drawing shall take precedence. In the
event of conflict between the requirements of this specification and the
referenced documents, this specification shall take precedence.
3.1 AMP Specifications:
A. 109-1
Test Specification, General Requirements for Test Methods
Test Methods for Electronic and Electrical Component Parts
3.2 Military Standard and Specifications:
MIL-STD-202
3.3 501-60015 :
4. Requirements:
4.1 Structure, Shape and Dimension
The product structure, shape and dimensions shall conform to requirements
shown on applicable drawing, unless other wise specified below.
(1) Number of Positions : 9 type in 20,30,34,40,48,50,60,68 and 96 positions
(2) Connector Type:
(3) Pitch and Row :
Horizontal
Vertical
Engaging Side: 1.27 mm pitch x2.54 mm in 2 rows
Board Side: 2.54 mm pitch x1.905 mm in zigzag of 4
rows
(4) Mounting on PCB: Screw-on (M2 Screws) Type
Free Standing Type
Retention Leg Type
With Kink Type
(5) Applicable PCB: Board Thickness: 0.8-1.6 mm with solder resistive agent
applied on Solder side.
: The kink Type is 1.6 mm Thk only.
Product Qualification Test Report
Tyco Electronics
AMP Shanghai Ltd
ASHL-0005- ES REV A
PAGE NO
3
108-60036
REV LOC
O
ES
4.2 Material and Finish:
4.2.1 Receptacle Contact and post Contact:
(1) Material: Phosphor Bronze
(2) Finish: Underplating:1.3 µm min. Nickel Underplate all over
Gold-Plating…0.2 µm min. thick gold plated
for 0-prefix
(Contact Area) no. items, and 0.75 µm min.
thick for 6-prefix no.items.
Other Areas: Gold Flash Plated
Tine Soldering: 1.0 µm min. Tin-plated
4.2.2 Housing:
(1) Material : ………………… Fider Glass reinforced
polybuthyleneterephalate resin (P. B. T.)
Colour: Black
178854 & 178857: Liquid Crystal Polymer
Colour: Black
(2) Flame Retardancy ……… UL 94 V –0
4.2.3 Retention Leg :
(1) Material: ……………… Brass
(2) Finish : ………………
4.3 Appearance:
The connectors shall be free from the defects such as damage. Cracks,
deformation, blister, dirt and burrs that are detrimental to connector functions
and product merchandising value.
4.4 Ratings:
(1) Temperature Rating: ……… -55°C/+105°C
(2) Current Rating: …………… 1 A max.
(3) Voltage Rating: …………… 100V DC. Max.
1.0 µm min. thick nickel underplate all over
2.0 µm min. thick tin plating all over
Tyco Electronics
AMP Shanghai Ltd
ASHL-0005- ES REV A
PAGE NO
4
108-60036
REV LOC
O
ES
4.5 Performance and Test Descriptions:
The product is designed to meet the electrical, mechanical and environmental
performance requirements specified in Fig. 5. All tests are performed at
ambient temperature unless otherwise specified.
4.6 Test Requirements and Procedures Summary:
Para.
4.6.1
Test Items
Confirmation of
Product
Requirements
Product shall be conforming to the
requirements of applicable product
drawing.
Timing Initial
Max.
Combination
Horizontal-to-
horizontal
Horizontal-to-
vertical
Vertical-to-vertical
Insulation
Resistance
4.6.3
1000 M
500 M
min. (Final)
15m
30m
Measure by applying test
potential between the adjacent
contacts, and between the
contacts and ground in the
mated connector.
MIL-STD-202, Method 302,
Condition B
4.6.4
Dielectric Strength
No abnormalities such as insulation
break-down or flashover shall take
place during the test.
Measure by applying test
potential between the adjacent
contacts. In the mated
connectors.
MIL-STD-202, Method 301
Fig. 5 (To be continued)
min. (Initial)
25m
After
Test
Max.
50m
Procedures
Visually, dimensionally and
functionally inspected per
applicable inspection plan.
Subject mated contacts
assembled in housing to
closed circuit current of 10
mA max. at open circuit
voltage of 50 mV max. Fig. 6.
Electrical Requirements
Termination
Resistance (Low
Level)
4.6.2
Tyco Electronics
AMP Shanghai Ltd
ASHL-0005- ES REV A
PAGE NO
5
108-60036
REV LOC
O
ES
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
