It is recommended that the temperature of the component does not exceed +150°C under worst
case conditions
-40 °C up to +100 °C
-40 °C up to +150 °C
-20 °C up to +40 °C
5,5 ±0,3
Ambient Temperature (refering to
I
R
)
Operating Temperature
Storage Temperature (in original
packaging)
Test conditions of Electrical Properties: +20°C, 33% RH if not specified differently
CREATED
CHECKED
GENERAL TOLERANCE
PROJECTION
METHOD
KaS
DESCRIPTION
BD
DIN ISO 2768-1m
WE-HCI SMD Flat Wire High
Current Inductor
SIZE
REVISION
STATUS
ORDER CODE
744316047
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
5040
001.001
Valid
2017-07-17
eiSos
1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Typical Inductance vs. Current Characteristics:
0.50
Typical Temperature Rise vs. Current Characteristics:
100.0
0.45
90.0
0.40
80.0
0.35
70.0
0.25
Temperature Rise [K]
Inductance [µH]
0.30
60.0
0.20
0.15
0.10
0.05
0.00
0.0
5.0
D
10.0
Current [A]
A
R
15.0
20.0
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
50.0
40.0
30.0
T
F
0.0
5.0
10.0
15.0
Current [A]
20.0
25.0
CREATED
CHECKED
GENERAL TOLERANCE
PROJECTION
METHOD
20.0
10.0
0.0
KaS
DESCRIPTION
BD
DIN ISO 2768-1m
WE-HCI SMD Flat Wire High
Current Inductor
SIZE
REVISION
STATUS
ORDER CODE
744316047
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
5040
001.001
Valid
2017-07-17
eiSos
2/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
P0
K0
T
W3
A
D0
P2
E1
Top Cover
Tape
A
D1
A0
P1
T2
T1
End
Feeding direction
No Component
min.160mm
Components
tolerance
size
A0 B0 W
typ. typ. +0,3/ -0,1
5040 5,30 6,05 12,00
T
T1
T2 K0 P0
P1
P2
D0
max. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0
0,40 0,10 4,45 3,95 4,00 8,00 2,00
1,50
165° - 180°
D
12 mm
A
R
Start
No Component
min.100mm
Cover Tape
min. 400mm
D1 E1
E2
F
Tape Type 2a
min. ±0,1 min.
±0,05
1,50 1,75 10,25 5,50
Polystyrene
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Carrier Tape
Cover Tape
T
F
B
C
D
tolerance
Tape width
12 mm
A
± 2,0
330.00
B
min.
1.50
C
min.
12.80
CREATED
CHECKED
GENERAL TOLERANCE
F
W1
close to center
N
W2
N
min.
60.00
W1
+2
12.40
B0
E2
W
VPE / packaging unit
pcs.
1500
D
min.
20.20
A
W2
max.
18.40
W3
min.
11.90
W3
max.
15.40
PROJECTION
METHOD
KaS
DESCRIPTION
BD
DIN ISO 2768-1m
WE-HCI SMD Flat Wire High
Current Inductor
SIZE
REVISION
STATUS
ORDER CODE
744316047
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
Pull-of force
Tape width
0,1 N - 1,3 N
5040
001.001
Valid
2017-07-17
eiSos
3/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Preheat Temperature Min
Preheat Temperature Max
Value
T
s min
150 °C
T
s max
200 °C
t
s
T
L
t
L
60 - 120 seconds
3 °C/ second max.
217 °C
T
p
Max. Ramp Up Rate
Max. Ramp Down Rate
T
L
T
s max
t
L
t
p
T
C
–5°C
Preheat Time t
s
from T
s min
to T
s max
Ramp-up Rate (T
L
to T
P
)
Liquidous Temperature
Time t
L
maintained above T
L
Temperature
Preheat Area
Peak package body temperature
Ramp-down Rate (T
L
to T
P
)
Time within 5°C of actual peak temperaure
Time 25°C to peak temperature
refer to IPC/ JEDEC J-STD-020E
T
s min
t
S
25
Time 25°C to Peak
Time
D
A
R
Properties
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Package Classification Reflow Temperature:
PB-Free Assembly | Package Thickness < 1.6 mm
PB-Free Assembly | Package Thickness ≥ 2.5 mm
PB-Free Assembly | Package Thickness 1.6 mm - 2.5 mm
260 °C
250 °C
refer to IPC/ JEDEC J-STD-020E
T
F
60 - 150 seconds
see table below
20 - 30 seconds
8 minutes max.
T
p
t
p
6 °C/ second max.
Volume mm³
<350
260 °C
CREATED
CHECKED
GENERAL TOLERANCE
Volume mm³
350-2000
260 °C
250 °C
245 °C
Volume mm³
>2000
260 °C
245 °C
245 °C
PROJECTION
METHOD
KaS
DESCRIPTION
BD
DIN ISO 2768-1m
WE-HCI SMD Flat Wire High
Current Inductor
SIZE
REVISION
STATUS
ORDER CODE
744316047
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
5040
001.001
Valid
2017-07-17
eiSos
4/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Cautions and Warnings:
The following conditions apply to all goods within the product series of WE-HCI of Würth
Elektronik eiSos GmbH & Co. KG:
General:
All recommendations according to the general technical specifications of the data sheet have to be complied with.
The usage and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.
If the product is potted in customer applications, the potting material might shrink during and after hardening. The product is exposed to the
pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the
electrical as well as the mechanical characteristics are endangered to be affected. After the potting material is cured, the core, wire and
termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.
The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of
the customer. All technical specifications for standard products do also apply to customer specific products.
Cleaning agents that are used to clean the customer application might damage or change the characteristics of the component, body, pins
or termination.
Direct mechanical impact to the product shall be prevented as the core material could flake or in the worst case it could break.
Product specific:
Follow all instructions mentioned in the data sheet, especially:
• The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise this will void the
warranty.
• All products shall be used before the end of the period of 12 months based on the product date code, if not a 100% solderability can´t
be ensured.
• Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.
• Due to heavy weight of the components of size 2212, strong forces and high accelerations might have the effect to damage the
electrical connection or to harm the circuit board and will void the warranty.
The general and product specific cautions comply with the state of the scientific and technical knowledge and are believed to be accurate
and reliable; however, no responsibility is assumed for inaccuracies or incompleteness.
D
A
R
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
T
F
CREATED
CHECKED
GENERAL TOLERANCE
PROJECTION
METHOD
KaS
DESCRIPTION
BD
DIN ISO 2768-1m
WE-HCI SMD Flat Wire High
Current Inductor
SIZE
REVISION
STATUS
ORDER CODE
744316047
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
5040
001.001
Valid
2017-07-17
eiSos
5/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
“tensymetry”这个词在《韦伯斯特词典》中没有解释，但在医学界却广为人知。由Tensys Medical Systems公司开发的tensymetry是一种使用生物机械、电气、软件工程的专有组合技术。利用这三种强大的技术，你可在手术室内对病人的心跳血压进行精确、连续、实时和非侵入性测量。 该技术结出的果实就是该公司的T-line Tensymeter产品。该产品线的最新进展是去年...[详细]
卡巴斯基的安全研究人员称其发现了如何攻击Intel微处理器的远程攻击代码，据传，这一代码可以通过TCP/IP包和JavaScript代码到达用户系统。 目前受影响的系统包括Windows XP，Vista，Windows Server 2003，Windows Server 2008，Linux甚至是BSD和Mac。但所幸大多数错误可以由Intel和BIOS厂商联合进行修复。 卡...[详细]
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
