电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索

BRC2518T2R2M

产品类别无源元件    电感器   
文件大小615KB,共12页
制造商Taiyo Yuden
标准
下载文档 详细参数 选型对比 全文预览

BRC2518T2R2M在线购买

供应商 器件名称 价格 最低购买 库存  
BRC2518T2R2M - - 点击查看 点击购买

BRC2518T2R2M规格参数

参数名称属性值
是否Rohs认证符合
厂商名称Taiyo Yuden
包装说明CHIP, 1007
Reach Compliance Codecompliant
ECCN代码EAR99
Factory Lead Time12 weeks
大小写代码1007
构造Chip
型芯材料FERRITE
直流电阻0.156 Ω
标称电感 (L)2.2 µH
电感器应用POWER INDUCTOR
电感器类型GENERAL PURPOSE INDUCTOR
功能数量1
端子数量2
最高工作温度105 °C
最低工作温度-40 °C
封装高度1.8 mm
封装长度2.5 mm
封装形式SMT
封装宽度1.8 mm
包装方法Tape, Embossed
最大额定电流1 A
自谐振频率200 MHz
形状/尺寸说明RECTANGULAR PACKAGE
屏蔽NO
特殊特征DCR MEASURED AT 30% TOLERANCE
表面贴装YES
端子位置DUAL ENDED
端子形状WRAPAROUND
测试频率1 MHz
容差20%
Base Number Matches1

文档预览

下载PDF文档
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product Information in this Catalog
Product information in this catalog is as of October 2019. All of the
contents specified herein and production status of the products listed
in this catalog are subject to change without notice due to technical
improvement of our products, etc. Therefore, please check for the
latest information carefully before practical application or use of our
products.
Please note that TAIYO YUDEN shall not be in any way responsible
for any damages and defects in products or equipment incorporating
our products, which are caused under the conditions other than those
specified in this catalog or individual product specification sheets.
Approval of Product Specifications
Ple a se c ont ac t TA IYO Y UD EN for fur the r det a ils of p ro duc t
specifications as the individual product specification sheets are
available. When using our products, please be sure to approve our
product specifications or make a written agreement on the product
specification with TAIYO YUDEN in advance.
Pre-Evaluation in the Actual Equipment and Conditions
Please conduct validation and verification of our products in actual
conditions of mounting and operating environment before using our
products.
Limited Application
1. Equipment Intended for Use
The products listed in this catalog are intended for general-
purpose and standard use in general electronic equipment (e.g.,
AV equipment, OA equipment, home electric appliances, office
equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and other equipment
specified in this catalog or the individual product specification sheets.
TAIYO YUDEN has the line-up of the products intended for
use in automotive electronic equipment, telecommunications
infrastructure and industrial equipment, or medical devices
classified as GHTF Classes A to C (Japan Classes I to III).
Therefore, when using our products for these equipment,
please check available applications specified in this catalog
or the individual product specification sheets and use the
corresponding products.
2. Equipment Requiring Inquiry
Please be sure to contact TAIYO YUDEN for further information
before using the products listed in this catalog for the following
equipment (excluding intended equipment as specified in this
catalog or the individual product specification sheets) which may
cause loss of human life, bodily injury, serious property damage
and/or serious public impact due to a failure or defect of the
products and/or malfunction attributed thereto.
(1) Transportation equipment (automotive powertrain control
system, train control system, and ship control system, etc.)
(2) Traffic signal equipment
(3) Disaster prevention equipment, crime prevention equipment
(4) Medical devices classified as GHTF Class C (Japan Class III)
(5) H i g h l y p u b l i c i n f o r m a t i o n n e t wo r k e q u i p m e n t , d a t a -
processing equipment (telephone exchange, and base
station, etc.)
(6) Any other equipment requiring high levels of quality and/or
reliability equal to the equipment listed above
3. Equipment Prohibited for Use
Please do not incorporate our products into the following
equipment requiring extremely high levels of safety and/or
reliability.
(1) Aerospace equipment (artificial satellite, rocket, etc.)
(2) Aviation equipment *
1
(3) Medical devices classified as GHTF Class D (Japan Class IV),
implantable medical devices *
2
(4) Powe r g e ne r atio n c o ntro l e quip m e nt (nu c le a r p owe r,
hydroelectric power, thermal power plant control system, etc.)
(5) Undersea equipment (submarine repeating equipment,
underwater work equipment, etc.)
(6) Military equipment
(7) Any other equipment requiring extremely high levels of safety
and/or reliability equal to the equipment listed above
*Notes:
1. There is a possibility that our products can be used only
for aviation equipment that does not directly affect the safe
operation of aircraft (e.g., in-flight entertainment, cabin
light, electric seat, cooking equipment) if such use meets
requirements specified separately by TAIYO YUDEN. Please
be sure to contact TAIYO YUDEN for further information
before using our products for such aviation equipment.
2. Implantable medical devices contain not only internal unit
which is implanted in a body, but also external unit which is
connected to the internal unit.
4. Limitation of Liability
Please note that unless you obtain prior written consent of TAIYO
YUDEN, TAIYO YUDEN shall not be in any way responsible for
any damages incurred by you or third parties arising from use of
the products listed in this catalog for any equipment that is not
intended for use by TAIYO YUDEN, or any equipment requiring
inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN
as described above.
Safety Design
When using our products for high safety and/or reliability-required
equipment or circuits, please fully perform safety and/or reliability
evaluation. In addition, please install (i) systems equipped with
a protection circuit and a protection device and/or (ii) systems
equipped with a redundant circuit or other system to prevent an
unsafe status in the event of a single fault for a failsafe design to
ensure safety.
Intellectual Property Rights
Information contained in this catalog is intended to convey examples
of typical performances and/or applications of our products and is
not intended to make any warranty with respect to the intellectual
property rights or any other related rights of TAIYO YUDEN or any
third parties nor grant any license under such rights.
Limited Warranty
Please note that the scope of warranty for our products is limited to
the delivered our products themselves and TAIYO YUDEN shall not
be in any way responsible for any damages resulting from a failure
or defect in our products. Notwithstanding the foregoing, if there is
a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company,
TAIYO YUDEN will warrant our products in accordance with such
agreement.
TAIYO YUDEN’s Official Sales Channel
The contents of this catalog are applicable to our products which are
purchased from our sales offices or authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents
s
).
of this catalog are not applicable to our products purchased from any
seller other than TAIYO YUDEN’official sales channel.
s
Caution for Export
Some of our products listed in this catalog may require specific
procedures for export according to
“U.S.
Export Administration
,
“Foreign
Exchange and Foreign Trade Control Law”
Regulations”
of Japan, and other applicable regulations. Should you have any
questions on this matter, please contact our sales staff.
20

BRC2518T2R2M相似产品对比

BRC2518T2R2M BRL2518T2R2M BRL3225T4R7M BRL3225T220K BRL3225T2R2M BRL3225T1R5M
描述 精度:±20% 电感值:2.2uH 直流电阻(内阻):78mΩ 额定电流:1.6A 精度:±20% 电感值:1.5uH 直流电阻(内阻):54mΩ 额定电流:1.75A
是否Rohs认证 符合 符合 符合 符合 符合 -
厂商名称 Taiyo Yuden Taiyo Yuden Taiyo Yuden Taiyo Yuden Taiyo Yuden -
包装说明 CHIP, 1007 CHIP, 1007 1210 1210 CHIP, 1210 -
Reach Compliance Code compliant compliant compliant compliant compliant -
ECCN代码 EAR99 EAR99 EAR99 EAR99 EAR99 -
Factory Lead Time 12 weeks 12 weeks 4 weeks 12 weeks 12 weeks -
大小写代码 1007 1007 1210 1210 1210 -
构造 Chip Chip Chip Chip Chip -
型芯材料 FERRITE FERRITE FERRITE FERRITE FERRITE -
直流电阻 0.156 Ω 0.1755 Ω 0.216 Ω 0.828 Ω 0.078 Ω -
标称电感 (L) 2.2 µH 2.2 µH 4.7 µH 22 µH 2.2 µH -
电感器应用 POWER INDUCTOR POWER INDUCTOR POWER INDUCTOR POWER INDUCTOR POWER INDUCTOR -
电感器类型 GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR -
功能数量 1 1 1 1 1 -
端子数量 2 2 2 2 2 -
最高工作温度 105 °C 105 °C 105 °C 105 °C 105 °C -
最低工作温度 -40 °C -40 °C -40 °C -40 °C -40 °C -
封装高度 1.8 mm 1.2 mm 1.7 mm 1.7 mm 1.7 mm -
封装长度 2.5 mm 2.5 mm 3.2 mm 3.2 mm 3.2 mm -
封装形式 SMT SMT SMT SMT SMT -
封装宽度 1.8 mm 1.8 mm 2.5 mm 2.5 mm 2.5 mm -
包装方法 Tape, Embossed Tape, Embossed Tape, Embossed Tape, Embossed Tape, Embossed -
最大额定电流 1 A 0.85 A 1 A 0.47 A 1.6 A -
自谐振频率 200 MHz 80 MHz 120 MHz 13 MHz 150 MHz -
形状/尺寸说明 RECTANGULAR PACKAGE RECTANGULAR PACKAGE RECTANGULAR PACKAGE RECTANGULAR PACKAGE RECTANGULAR PACKAGE -
屏蔽 NO NO NO NO NO -
特殊特征 DCR MEASURED AT 30% TOLERANCE DCR MEASURED AT 30% TOLERANCE DCR MEASURED AT 20% TOLERANCE DCR MEASURED AT 20% TOLERANCE DCR MEASURED AT 20% TOLERANCE -
表面贴装 YES YES YES YES YES -
端子位置 DUAL ENDED DUAL ENDED DUAL ENDED DUAL ENDED DUAL ENDED -
端子形状 WRAPAROUND WRAPAROUND WRAPAROUND WRAPAROUND WRAPAROUND -
测试频率 1 MHz 7.96 MHz 0.1 MHz 0.1 MHz 0.1 MHz -
容差 20% 20% 20% 10% 20% -
Base Number Matches 1 1 1 - 1 -
是否无铅 - 不含铅 不含铅 不含铅 不含铅 -
STM8L152R8T6 LCD寄存器问题,人都快折腾峰了,那个大神指点下。
STM8L152系列手册上说大容量芯片有LCD_CR4寄存器,功能是LCD_RAM页面的切换、DUTY和BIAS的选择,下面图片就是手册介绍 348040 但是IAR FOR STM8的头文件里面(iostm8l152r8.h)没有LCD_ ......
ZXDSCCD stm32/stm8
EEWORLD大学堂----高可靠性的FPGA—Microsemi公司造
高可靠性的FPGA—Microsemi公司造:https://training.eeworld.com.cn/course/535...
DreamerJane 单片机
CE5.0 debug 版NK编译出错!
一直没用过DEBUG版的NK,今天编译后出现错误: kitl.lib(ethdbg.obj) : error LNK2001: unresolved external symbol dpCurSettings 是在编译kernel\kernkitlprof 的时候出现的! 我把这r ......
dm29769671 嵌入式系统
2009 最悲惨的一年
      市调机构iSuppli公布了2009年度全球半导体行业20大厂商的初步统计报告。虽然整个产业愁云惨淡,前十名中只有一家保持了增长,所有20名中也仅仅三家没有倒退,但 ......
西点 FPGA/CPLD
OPA380组成的2倍同相比例运算放大器的疑问
581440如图所示电路,有以下两个疑问: 1.波特图中的幅频增益为什么不是6dB,而是稍微大于6dB(为6.02dB,如图中的蓝色框所示)?是误差带来的吗? 2. 波特图中的幅频增益为什么有个凸起, ......
xiaxingxing 模拟电子
通过在FPGA集成DSP功能来增加成像应用的性能
本文主要描述用于小型高性能超低成本照相机的嵌入系统的开发。最初采用数字信号处理器,几个ASSP和外接存储器。要增加性能需要采用可编程逻辑实现的可配置软核处理器。本文的描述可得到所需的性 ......
lorant FPGA/CPLD

 
EEWorld订阅号

 
EEWorld服务号

 
汽车开发圈

 
机器人开发圈

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程 索引文件: 2820  2293  142  1886  2244  30  55  57  31  46 

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved