HMC1060LP3E
v00.1211
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Typical Applications
Features
Ultra Low noise:
3 nV/√Hz at 10 kHz, 7 nV/√Hz at 1 kHz
High Power Supply rejection ratio (PSrr)
80 dB at 1 kHz, 60 dB at 1 MHz
Four Adjustable Voltage outputs:
Vr1: 100 mA at 1.8 V to 5.2 V
Vr2 & Vr3: 50 mA at 1.8 V to 5.2 V
Vr4: 300 mA at 1.8 V to 5.2 V
optional Proportional to temperature (PtAt) output
Voltages: 7 % / 125 °C
thermal Protection
Low Power-down Current: <1 µA
16 Lead 3x3 mm SMt Package: 9 mm²
Power Conditioning - SMt
the HMC1060LP3e is ideal for applications requiring
superb power supply isolation and ultra low noise
performance:
• Ultra Low Noise Frequency Generation (PLLs, VCOs,
PLLs with integrated VCos)
• RF & Mixed-Signal Supply
Functional Diagram
General Description
the HMC1060LP3e is a BiCMoS ultra low noise
quad-output linear voltage regulator targeted at high
performance applications requiring superb power
supply isolation.
Maximum 500 mA of current, distributed between four
independent outputs, enable the HMC1060LP3e to
supply all of the power needs of Hittite’s wideband
PLL with integrated VCo products, such as the
HMC830LP6ge.
Although targeted at Hittite’s wideband PLLs with
integrated VCo products, the HMC1060LP3e makes
an excellent general purpose regulator that supports
adjustable output voltages ranging anywhere from
1.8 V to 5.2 V.
An integrated PtAt (Proportional to Absolute
temperature) feature enabled via an external pin,
allows the HMC1060LP3e to scale the supply voltage
with temperature in order to maximize phase noise
and output power performance of Hittite’s wideband
with integrated VCo products, as well as other devices
powered by the HMC1060LP3e.
integrated thermal protection disables the outputs of
the HMC1060LP3e at extreme temperatures, until
the device cools down, making the HMC1060LP3e
a robust device capable of dealing with temporary
and unforeseen scenarios including momentary short
circuits and extreme temperatures.
external enable input provides a convenient way
to power on or off all of the devices supplied by the
HMC1060LP3e.
the HMC1060LP3e is housed in a 3x3 mm QFn SMt
package.
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC1060LP3E
v00.1211
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Electrical Specifications
Parameter
output Voltage on All outputs
default output Voltage Vr1, Vr2, Vr3
default output Voltage Vr4
output Voltage tolerance
[1]
input Voltage range (default)
input Voltage range
[2]
output Current Vr1
[3]
output Current Vr2, Vr3
[3]
output Current Vr4
[3]
total output Current
output noise Voltage density
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
integrated output noise 100 Hz to 100 kHz
Load regulation, Vr4
Vr1 PSrr
1 kHz
10 kHz
100 KHz
1 MHz
10 MHz
Current Consumption (i
gnd
)
Power down Current
Start-Up transient time
Ven = Vdd = 5.6 V;
Maximum Load Current
Ven = Low; Vrx outputs are floating (high
- impedance) in Power-down Mode
0 to 90% of final voltage;
en connected to Vdd
0 to 90% of final output voltage
Cref = 4.7 µF; Cload = 10 µF; Vdd = 5.6
Ven transition from 0 to Vdd
2
0
no loads
All outputs Loaded
150
1.6
0 to 300 mA
t
A
= -40 °C to +85 °C
t
A
= -40 °C to +85 °C
t
A
= -40 °C to +85 °C
t
A
= -40 °C to +85 °C
2200
120
7
3
3
1.5
0.007
80
80
72
60
52
2.1
1
50
2
default Configuration shown in
Application
Schematic
PtAt Mode disabled
PtAt Mode enabled
5.3
3.35
Max (Vrx) +
0.3 V
Conditions
Min
1.8
3.24
4.9
typ
Max
5.2
Units
V
V
V
%
%
V
V
mA
mA
mA
mA
3.3
5.0
3.36
5.1
2
3
5.6
5.6
100
50
300
500
nV/√Hz
µVrms
% / mA
dB
mA
µA
ms
en turn-on delay
enable input en High Level
enable input en Low Level
thermal Protection threshold Junction
temperature
Maximum dissipated Power
30
Vdd + 0.3
0.8
ms
V
V
°C
w
[1] when using external resistors to configure the HMC1060LP3e outputs to non-default levels, the temperature coefficient of external resistors
may increase the output voltage tolerance. note that internal resistors have a temperature coefficient of +270 ppm/°C.
[2] Minimum input voltage (Vdd) is defined by maximum desired output voltage. As an example minimum input voltage (Vdd) of 4.3 V is required
to set the HMC1060LP3e outputs as follows Vr1 = Vr2 = Vr3 = 3.3 V, Vr4 = 4 V.
[3] the outputs will withstand short-circuit conditions for a duration of less than 10 seconds.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Power Conditioning - SMt
2
t
A
= +25 °C, Vdd = 5.6 V, Unless otherwise Specified, PtAt Mode is disabled, measured at maximum load conditions
in default configuration as shown in
Application Schematic.
HMC1060LP3E
v00.1211
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Typical Performance Characteristics
Power Conditioning - SMt
t
A
= +25 °C, Vdd = 5.6 V, Unless otherwise Specified, PtAt Mode is disabled, measured at maximum load conditions
in default configuration as shown in
Application Schematic.
Figure 1. Typical Output Noise Density at
Each HMC1060LP3E Output
10
-6
Figure 2. Typical Output Noise Density vs.
Capacitor Values
[1]
10
-6
NOISE DENSITY (V/√Ηz)
NOISE DENSITY (V/√Ηz)
VR1 100 mA
VR2 50 mA
10
-7
VR3 50 mA
VR4 300 mA
10
-7
10 uF @ VRx & 4.7 uF @ VREF
10 uF @ VRx & 1 uF @ VREF
4.7 uF for All
1 uF for All
10
-8
10
-8
10
-9
10
-9
10
-10
10
10
2
-10
10
3
10
10
FREQUENCY (Hz)
4
5
10
6
10
7
10
2
10
3
10
4
10
5
10
6
10
7
FREQUENCY (Hz)
Figure 3. VR1, VR2, VR3, & VR4 Power
Supply Rejection Ratio (PSRR)
-40
-50
-60
PSRR (dB)
Figure 4. VR4 PSRR vs. VDD (4.7µF on
VR4 and VREF)
-20
-30
-40
PSRR (dB)
-50
-60
-70
-70
-80
-90
-100
-110
10
2
VR4 300 mA Load Current
VR1 100 mA Load Current
VR2 & VR3 50 mA Load Current
10
3
-80
-90
VDD 5.6V
VDD 5.4V
VDD 5.2V
10
4
10
5
10
6
10
7
10
2
10
3
10
4
10
5
10
6
10
7
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 5. VR1, 2, 3 Voltage vs.
Temperature, PTAT Mode Disabled
3.45
Figure 6. VR1, 2, 3 Voltage vs.
Temperature, PTAT Mode Enabled
3.45
3.4
OUTPUT VOLTAGE (V)
3.35
OUTPUT VOLTAGE (V)
VR1 100 mA Load Current
VR2 50 mA Load Current
VR3 50 mA Load Current
3.4
3.35
3.3
3.3
3.25
3.25
VR1 100 mA Load Current
VR2 50 mA Load Current
VR3 50 mA Load Current
3.2
-40
-20
0
20
40
O
3.2
60
80
-40
-20
0
20
40
O
60
80
TEMPERATURE ( C)
TEMPERATURE ( C)
[1] VreF capacitor corresponds to C1 in
Application Schematic.
Vrx capacitors correspond to capacitors C10, C7, C8, C9 at the output of Vr1, Vr2,
Vr3 and Vr4 pins of the HMC1060LP3e respectively.
3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC1060LP3E
v00.1211
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Figure 7. VR4 Output Voltage vs.
Temperature, PTAT Mode Disabled
[2]
5.15
5.1
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
Figure 8. VR4 Output Voltage vs.
Temperature, PTAT Mode Enabled
[2]
5.15
5.1
5.05
5.05
5
5
4.95
4.95
4.9
4.9
4.85
-40
-20
0
20
40
O
4.85
60
80
100
-40
-20
0
20
40
O
60
80
100
TEMPERATURE ( C)
TEMPERATURE ( C)
Figure 9. VR4 Output Voltage vs. Supply
Voltage On VDD Pin, PTAT Mode Disabled
[2]
5.2
5.1
5
4.9
4.8
4.7
4.6
4.5
4.6
4.8
5
5.2
5.4
5.6
-40 C
25 C
85 C
Figure 10. VR4 Output Voltage vs. Supply
Voltage On VDD Pin, PTAT Mode Enabled
[2]
5.2
5.1
5
4.9
4.8
4.7
4.6
4.5
4.6
4.8
5
5.2
5.4
5.6
-40 C
25 C
85 C
OUTPUT VOLTAGE (V)
SUPPLY VOLTAGE ON VDD PIN (V)
OUTPUT VOLTAGE (V)
SUPPLY VOLTAGE ON VDD PIN (V)
Figure 11. VR4 Output Voltage vs. Load
[2]
5.06
5.04
Figure 12. VR1 Output Voltage vs. Load
3.33
3.32
5.02
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
3.31
5
4.98
4.96
4.94
4.92
0
50
100
150
200
250
300
3.3
3.29
3.28
3.27
0
20
40
60
80
100
LOAD CURRENT (mA)
LOAD CURRENT (mA)
[2] Measured results were compensated for evaluation board losses.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Power Conditioning - SMt
4
HMC1060LP3E
v00.1211
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Absolute Maximum Ratings
Vdd to gnd Voltage (max / min)
+6.5 V / -0.3 V
[1]
Vdd + 0.5 V / -0.3 V
Vdd + 0.5 V / -0.3 V
25 °C/w
+150 °C
[2]
-65 to +150 °C
-40 to +85 °C
Class 3A
Power Conditioning - SMt
en to gnd Voltage (max / min)
rdx / HVx to gnd Voltage (max
/ min)
thermal resistance
(Junction to ground paddle)
Maximum Junction temperature
Storage temperature
operating temperature
eSd Sensitivity (HBM)
Stresses above those listed under Absolute Maximum ratings
may cause permanent damage to the device. this is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. exposure to
absolute maximum rating conditions for extended periods
may affect device reliability. the absolute maximum ratings
apply individually only and not in combination.
eLeCtroStAtiC SenSitiVe deViCe
oBSerVe HAndLing PreCAUtionS
[1] including short transient events
[2] operation above +125 °C may shorten the lifetime of the device.
operation above +150 °C risks immediate damage to the device.
Outline Drawing
noteS:
1. LeAdFrAMe MAteriAL: CoPPer ALLoY
2. diMenSionS Are in inCHeS [MiLLiMeterS].
3. diMenSion doeS not inCLUde MoLdFLASH oF 0.15mm Per Side.
4. diMenSion doeS not inCLUde MoLdFLASH oF 0.25mm Per Side.
5. ALL groUnd LeAdS MUSt Be SoLdered to PCB groUnd.
6. CLASSiFied AS MoiStUre SenSitiVitY LeVeL (MSL) 1.
Package Information
Part number
HMC1060LP3e
Package Body Material
roHS-compliant Low Stress injection Molded Plastic
Lead Finish
100% matte Sn
MSL rating
MSL1
[2]
Package Marking
[1]
1060
XXX
X
[1] 4-digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
5
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PCB设计
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
