Arria 10 SoC SoM
System-on-Module featuring
Highly integrated Altera Arria10 SoC Module
270 or 660 KLE, Commercial or Industrial Temp grade
Dual mode as a System-on-module or FMC carrier board
2x Gbit Ethernet HPS, USB 2.0 OTG, USB 3.0
DDR4 HPS and FPGA
eMMC Flash Memory
PCIe Gen3 x8 Edge
Target markets:
Automotive
Industrial
Video Broadcast
Machine and Intelligent Vision
Military
Medical
Test & Measurement
Contact us :
ReFLEX CES Europe
Phone : +33(0) 1 169 870 255
email : sales@reflexces.com
www.reflexces.com
© ReFLEX CES 2016
–
All Rights Reserved
–
Oct/Rev02.2
ReFLEX CES North America/AsiaPAC/Japan
Phone : +1 (408) 887 5981
email : salesusa@reflexces.com
Arria 10 SoC SoM
Full Specifications
Arria 10 SoC FPGA
2x DDR4 SDRAM
up to 2400MT/s
System-on-Module usage
(Bottom connectors only)
Dual ARM® Cortex
TM
-A9 MPCore
TM
processor-based hard processor system (HPS)
270 KLE or 660 KLE - F34 package (1152 pins)
–
Commercial or Industrial temp grade
32-bit wide bank for FPGA (2GB with 270 KLE or 4GB with 660 KLE version)
32-bit wide bank for HPS (2GB with 270 KLE or 4GB with 660 KLE version)
1x FMC LPC bottom connector with HPS signals and 14 transceivers (Bottom-Right)
1x FMC HPC or LPC bottom connector depending on FPGA density (Bottom-Left):
LPC bottom connector for 270 KLE density with 10 transceivers
HPC bottom connector for 660 KLE density with 10 transceivers
In addition to the System-on-Module usage,
1x FMC LPC Top connector with 10 transceivers, 1.8V VITA 57.1 (Top-Right)
1x FMC Top connector with 10 transceivers, 1.8V VITA 57.1 (Top-Left):
LPC Top connector for 270 KLE density
HPC Top connector for 660 KLE density
24 transceiver speed of 11.3Gbps
80 LVDS bidirectional (or 160 Single ended) on FMC HPC Top connector (Top-Left)
32 LVDS bidirectional (or 64 Single ended) on FMC LPC Top connector (Top-Right)
USB 3.0 device connectivity using Cypress FX3 super speed controller (660 KLE version)
USB OTG support connected to the HPS
Max10 CPLD for system control
10/100/1000 Base-T Ethernet interfaces connected to the HPS
I
2
C, UART connected to the HPS. UART connected to System controller
Store U-boot, Kernel and RootFS (8GB on 270 KLE and 32GB on 660 KLE), HPS programming
AS configuration supported with EPCQL512, remote upgrade and failsafe
PMBus support
Power consumption: 35W typ., 55W max (without FMC), 103W max (with Dual FMCs)
Compatible with heat spreader and heatsink (passive or active)
86mm x 95mm (3,4x3,8 inches)
VHDL test designs
Mechanical files :3D DWF/STEP models and 2D drawing (upon request)
Guidelines for baseboard development (upon request)
Module informations (power, decoupling, signal features, S-parameters) (upon request)
Carrier board usage
(Bottom and Top connectors)
LVDS, LVCMOS & XCVR
USB 3.0 Device
USB 2.0 Device/Host
System Controller
2x Gigabit Ethernet
Serial interfaces
Soft programming /eMMC
FPGA programming
Power Management
Module dimensions
Deliverable
Ordering informations
Version
Module "Lite" version
(Commercial grade)
Module "Basic" version
(Commercial grade)
Module "Ultra" version
(Commercial grade)
Module "Turbo" version
(Industrial grade)
RXCA10S066PF34-SOM00T
RXCA10S066PF34-SOM00U
RXCA10S027PF34-SOM00B
Part number
RXCA10S027PF34-SOM00L
Comments
270 KLE,
speed grade -3, Two banks
DDR4
/ by 32bit /
4GBytes
/ @1866MT/s, eMMC 8GBytes, Bottom connectors
270 KLE,
speed grade -3, Two banks
DDR4
/ by 32bit /
4GBytes
/ @1866MT/s, eMMC 8GBytes,
Bottom & Top connectors
660 KLE,
speed grade -3, Two banks
DDR4
/ by 32bit /
8GBytes
/
@1866MT/s,
eMMC 32GBytes, USB3.0,
Bottom & Top connectors
660 KLE, speed grade -1, Industrial temp grade,
Two banks
DDR4
/ by 32bit / 8GBytes /
@2400MT/s,
eMMC 32GBytes, USB3.0, Bottom
& Top connectors
Development Kit :
For the Development Kit, ask information about the Achilles Instant-DevKit
(flyer available)
The Kit is using the “Ultra” version
ACHILLES
© ReFLEX CES 2016
–
All Rights Reserved
–
Oct/Rev02.2
Contact us :
ReFLEX CES Europe
Phone : +33(0) 1 169 870 255
email : sales@reflexces.com
www.reflexces.com
ReFLEX CES North America/AsiaPAC/Japan
Phone : +1 (408) 887 5981
email : salesusa@reflexces.com