SB
®
175 Connectors
- up to 280 Amps
2 Pole
Wires sizes from #10 (5.3 mm²) to 1/0 (50 mm²)
fi
t in
the second to largest connector in the SB
®
series. The
3 pole SB
®
175 adds an additional position for power or
grounding. All Multipole wire connector housings are
genderless and mate to themselves minimizing inven-
tory and assembly complexity.
3 Pole
• Silver Plated Wire Contacts up to 1/0 (50 mm²)
Allows UL rated currents up to 280 amps
• Chemical Resistant Housing Option
Extends temperature range down to -40°C, while offering
enhanced UV and chemical resistance
• UL Rated for Hot Plugging up to 100 Amps
Great for battery or other applications where the ability to
interrupt circuits is required
| SB
®
175 ORDERING INFORMATION |
SB
®
175 Standard Housings
The second to largest SB
®
housings work with wire contacts up to 1/0
AWG [50 mm²] as well as busbar contacts. Genderless design mates with
itself. Mechanical keys are color coded. NOTE: SB
®
175 black housing is
keyless and can be mated with all other colors.
Description
--- Part Numbers ---
Minimum Quantity .......... 200
50 ...
Yellow
943-BK
943
Orange
942-BK
942
Red
949-BK
949
Gray
940-BK
940
Blue
941-BK
941
Black (Keyless)
2-7252G11 -
SB
®
175
SECTION 3
Bottom View
[ 79.6 ]
3.13
[ 6.5 ]
Ø 0.26
(2) PLC’S
[ 55.6]
2.19
Material ID
P = Chemical
Resistant
[ 28.6 ]
1.13
Mated Length
[ 11.3 ]
0.45
SB
®
175 Chemical Resistant Housings
Same features as the Standard SB
®
175 but molded in a
chemical resistant PBT/ PC blend. Suitable for use to -40°C.
Description
---- Part Numbers ----
Minimum Quantity ....
200
50 ...
Red
P949-BK
P949
Gray
P940-BK
P940
[ 133.4 ]
5.25
[ 25.4 ]
1.00
© 2018 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products®, A®, SB® and the APP Logo are registered trademarks of Anderson Power Products, Inc.
All Data Subject To Change Without Notice
www.andersonpower.com
- 77 -
SB
®
175 3 Pole Housings & Hardware
A three pole version of the standard SB 175 housing has
a two piece housing with springs and hardware. Useful for
DC 2 wire plus ground and AC single phase applications.
®
Top View
[ 79.4 ]
3.13
[28.6]
1.13
[ 11.7 ]
0.46
[ 6.7 ]
Ø 0.27 (4)
Description
Minimum Quantity ..........................
Gray Housing and Hardware Kit
Gray Housing Top Half
Gray Housing Bottom Half
Hardware Kit
--- Part Numbers ---
100
25 ....
-
902
2-5048
-
2-5049
-
-
110G34
[ 25.4 ]
1.00
Side View
[ 28.6 ]
1.13
[ 82.6 ]
3.25
[ 26.2 ]
1.03
SB
®
175 Silver Plated Wire Contacts
Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles.
See reducing bushings in accessory section for smaller wires.
Dimensions
Mating
Loose Piece
-A-
-B-
-C-
-D-
inches mm
inches mm inches mm
AWG
mm²
Force - Part Numbers - inches mm
Minimum Quantity ........... 500
50
..........................................................................................................
1/0
53.5
High
1382-BK 1382
2.35
59.69 0.52
13.21
0.44
11.18 1.04
26.42
1
42.4
High
1347-BK 1347
2.35
59.69 0.52
13.21
0.39
9.91 1.04
26.42
2
33.6
High
1383-BK 1383
2.35
59.69 0.52
13.21
0.35
8.89 1.04
26.42
4
21.1
High
1384-BK 1384
2.35
59.69 0.52
13.21
0.30
7.62 1.04
26.42
6
13.3
High
1348-BK 1348
2.10
53.34 0.37
9.40
0.22
5.59 0.80
20.32
SECTION 3
A
D
C
SB
®
175
B
[ 12.7 ]
0.50
SB
®
175 Silver Plated Busbar Contacts
Provides a quick disconnect input or output busbar connection.
Busbar contacts are for mating with wire contacts only. Part number
180BBS includes lock nuts. Locknuts must be ordered separately
for 180BBS-BK.
Mating
Type
Thread
Force
Minimum Quantity ...................
Busbar
1/4-20
High
Lock Nut 1/4-20
-
------ Loose Piece Part Numbers ------
1,000
120
10 ....
-
180BBS-BK 180BBS
H1216P7
110G56
110G55
See Busbar contact drawing on
website for further detail.
[ 109.0 ]
4.29
[ 12.7 ]
0.5
B
#¼- 20 THD
[ 25.4 ]
1.0
[ 4.57 ]
0.18
- 78 -
www.andersonpower.com
All Data Subject To Change Without Notice
| SB
®
175 CONNECTOR SPECIFICATIONS |
Electrical
Current Rating Amperes ¹
Wire to Wire (1/0 AWG)
Wire to Busbar (1/0 AWG)
3 Pole Wire to Wire (1/0 AWG)
Voltage Rating AC/DC
UL 1977
Dielectric Withstanding Voltage
Volts AC
UL 1977
280
200
175
CSA
175
Mechanical
Wire Size Range
Wire Contacts with Bushings
Max. Wire Insulation Diameter
AWG
10 to 1/0
in.
0.600
°F
-4° to 221°
-40 to 221°
Silver (Ag)
10,000
Lbf.
25
35
N
111
156
mm²
5.3 to 53.5
mm
15.240
°C
-20° to 105°
-40° to 105°
600
Operating Temperature²
Standard
Chemical Resistant*
Mating Cycles No Load by Plating
Wire and Busbar Contacts
Avg. Mating / Unmating Force
2 Pole
3 Pole
2,200
Avg. Mated Contact Resistance Milliohms ¹
6” of 1/0 AWG wire
0.100
UL Hot Plug Current Rating Amperes - Wire & Busbar
250 cycles at 120V DC 1/0 wire
100A
Materials
Housing
Standard Plastic Resin
Chem. Resistant Resin
Contact Retention Spring
Housing Flammability Rating
UL94
Glow Wire
Wire & Busbar Contacts
Base
Plating
Contact Termination Methods
Crimp ³
Hand Solder
Wrench / Socket
Polycarbonate
Polycarbonate / PBT blend
Stainless Steel
Min. Contact / Spring Retention Force
lbf
150
N
667
Mechanical Shock
4
MIL-STD-202
Vibration High Frequency
4
MIL-STD-202
213 Condition A
50g’s
V-0
960°C (GWFI) / 850°C (GWIT)
204 Condition A
10g’s
Copper Alloy
Silver
Wire Contacts
Wire Contacts
Busbar Contacts
NOTE 1: See IEC 60664-1 for working voltage.
NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded.
¹ Based on: 105°C rated or better cable of the largest size,
Properly calibrated APP recommended tooling, and a 25°C
ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating
below a 30°C temperature rise.
² Limited by the thermal properties of the connector plastic housing.
³ Use APP recommended tooling only. Alternate tools may adversely affect the performance of our
connectors along with UL and CSA recognition.
4
Tested with contact part number 1382.
SB
®
175
SECTION 3
| IEC INFORMATION |
Connector
Series
Creepage/Clearance Material
Configurations per IEC 60950-1
Group
Unmated
SB®175
Mated
5.73 mm
5.73 mm
IIIa
Attributes
AMP Rating AC/DC
Voltage Rating AC/DC (Steady State)
Breaking Capacity - AMP Rating /Cycles
Voltage Rating (Breaking Capacity)
Finger Safety - Mated Only
Wire Size Tested
Contact Series Tested
Climatic Testing (Cold, Heat & MFG)
Cycle Life
Mechanical Strength Impact
Temperature Range
SB175
175
500 V AC/DC ( Operational)
175 Amp / 10 Cycles
220 VDC
IEC 60529 - IP20
50 mm²
1382
IEC 60512 Test -11j, 11i & 11g,
IEC 60512 Test 9a - 5000 Cycles
IEC 60512-5 @ 29.5 Inches - dropped 8 times
-20 °C to 105 °C
-4 °F to 221 °F
Protection
Touch Safety with Wire Contacts
IEC 60529
IP10
Environmental Sealing with Boots
IEC 60529
IP64
NOTE 3: Refer to the Constructional Data form for additional
information on our website., www.andersonpower.com
All Data Subject To Change Without Notice
www.andersonpower.com
- 79 -
| SB
®
175 CONNECTOR TEMPERATURE CHARTS |
Current - Temperature Derating per IEC 60512-5-2 Test 5B
SB
®
175
Temperature Rise at Constant Current
60
Temperature rise charts are based on a
25°C ambient temperature.
For Temperature Rise Above 60°C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website.
SB
®
175
Derating vs. Ambient Temperature
125
Ambient Temperature (°C)
50
Temperature Rise
Above Ambient (°C)
40
30
20
10
0
0
25
50
75
100 125 150 175 200 225 250
Amperes Applied
1/0 AWG
2 AWG
1 AWG
4 AWG
100
75
50
25
0
25 50 75 100 125 150 175 200 225 250 275 300
Amperes Applied
1/0 AWG
2 AWG
1 AWG
4 AWG
| SB
®
175 ACCESSORIES |
Cable Clamps
Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging
wire or contacts from the housing. Only Bolt On type clamps can be used with the handles. Cable
clamps are recommended for solder terminated wires. Not for use with 3 pole housing.
Cable Size
Max / Min In. Max / Min mm
Description
Inches O.D.
mm O.D.
---- Part Numbers ----
Minimum Quantity ...................................................................................
100
50 ....
Self Attaching for Discrete Conductor 0.55 to 0.24
14 to 6
105G3
945
Bolt On for Discrete Conductor
0.66 to 0.24
16.7 to 6.2
945G3-BK 945G3
Bolt On for Bundled Conductor
0.75 to 0.29
18.3 to 7.3
946G1-BK 946G1
SECTION 3
945G3
"A" Frame Handle
(not included).
SB
®
175
946G1
"A" Frame Handle
(not included).
The given wire O.D. information is an
estimate. Cable clamps should be
evaluated for performance with the
actual wire to be used.
945
Handles
Handles are made out of durable PC plastic. Hardware to
attach to connector body included in kits. Not for use with
3 pole housing.
Description
----- Part Numbers -----
Minimum Quantity .... 100
25 ...
Gray Handle Kit
-
995G1
Red Handle Kit
-
995G3
Handle Only, Gray
3-5074P1
-
Handle Only, Red
3-5074P3
-
Handle Only, Black 3-5074P5
-
Hardware Bag
-
105G8
995G1
- 80 -
www.andersonpower.com
All Data Subject To Change Without Notice
Dust Cover
Prevents dust and dirt from entering the mating interface
of the connector when unmated. NOTE: Not a Hermetic Seal.
Not for use with 3 pole housing.
Description
----- Part Numbers ----
Minimum Quantity .............................
500
50 ...
Dust Cover with Lanyard Strap, Red 113890P2 134G2
Slide cover over
mating end.
SB
®
Environmental Boots
SB
®
Environmental Boots provide water, dirt, chemical and UV protection for SB
®
175
connectors. The durable boots shield the connectors from water and dirt to IP64* in
both the mated and unmated condition.
Description
Minimum Quantity ......................................
SB
®
175 Environmental Boot, Load
SB
®
175 Environmental Boot, Source
*IP64 test pending
C
B
--------------- Part Number --------------
250
3-6037P1-BK
3-6036P1-BK
25 ...
3-6037P1
3-6036P1
Dimensions
-A-
-B-
-C-
in mm
in mm in mm
9.5 241
3.2 80
9.3 236
A
SB
®
175 Lockout
Works with standard lockout - tagout equipment to prevent access
to the mating interface of the connector. Made from durable PC plastic.
Can be used with 3 pole housing to lockout positive and negative
positions only.
Description
Minimum Quantity ..........
Red Lockout - Tagout Kit
---- Part Number ----
25
...
SB175-LOCKOUT
SB
®
175 Connector not included.
SB
®
175
SECTION 3
Manual Release Bracket - Mounting Side
Works with the Locking Side to ease mating and unmating connectors.
Not for use with 3 pole housing.
Description
Minimum Quantity ............
Bracket and Hardware Kit
- Part Number -
10
...
924G1
Mounting Plate
Locking Plate
Manual Release Bracket - Locking Side
Works with the Mounting Side to ease mating and unmating
connectors. Not for use with 3 pole housing.
Cable Size
Max / Min
Max / Min
Description
Inches O.D.
mm O.D.
- Part Number -
Minimum Quantity ............................................................................
10
....
Bracket and Hardware Kit w/ Clamp
0.50 to 0.21
12.6 to 5.4
923G1
The given wire O.D. information is an estimate. Cable clamps should be evaluated for
performance with the actual wire to be used.
Handle
Cable Clamp
Reducing Bushings: for Use with Contact # 1382
Use with contact part number 1382-BK to allow a smaller wire to be used with the connector. Electrical capability is
derated with smaller wire.
Dimensions
- ID -
Contact Barrel Size
Wire Size
----------------- Part Numbers ------------------ inches mm
Minimum Quantity ....................................................... 1,500
1,000
500
100 ......................
1/0 AWG [53.5 mm²] #1 AWG [42.4 mm²]
-
-
5687-BK 5687 0.39
9.91
1/0 AWG [53.5 mm²] #2 AWG [33.6 mm²]
5690-BK
-
-
5690 0.34
8.64
1/0 AWG [53.5 mm²] #4 AWG [21.2 mm²]
-
5693-BK
-
5693 0.27
6.86
1/0 AWG [53.5 mm²] #6 AWG [13.3 mm²]
-
5663-BK
-
5663 0.22
5.59
1/0 AWG [53.5 mm²] #10 - 8 AWG [5.3 - 8.4 mm²] 5648-BK
-
-
5648 0.19
4.83
[ 25.4 ]
1.00
ID
Wire Entrance
All Data Subject To Change Without Notice
2018-0054
DS-SB175 REV C6
www.andersonpower.com
- 81 -
DIY/开源硬件专区
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
