Resistors
Surface Mount SOIC
Resistor
Mount SOIC
Surface
Networks
Surface
Networks
SOIC Series
Resistor
Mount SOIC
SOIC Series
COTS applications
Tested for
Both narrow and wide body versions available
Tested for COTS applications
Standard
SOIC Series
JEDEC 8, 14, 16, and 20 pin packages
Both narrow and wide body versions available
Ultra-stable TaNSil®
•
Tested for COTS applications
resistors on silicon substrates
Standard JEDEC 8, 14, 16, and 20 pin packages
RoHS compliant
body versions available
•
Both narrow and wide
and Sn/Pb terminations available
Ultra-stable TaNSil® resistors on silicon substrates
•
Standard JEDEC 8, 14, 16, and 20 pin packages
Standard Sn/Pb and Pb-free terminations available
Resistor Networks
·
·
·
·
·
•
Ultra-stable TaNSil
®
resistors on silicon substrates
•
RoHS compliant and Sn/Pb terminations available
All Pb-free parts comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3)
IRC’s TaNSil
®
SOIC resistor networks are the perfect solution for high volume applications that demand a small
wiring board footprint. The .050" lead spacing provides higher lead density, increased component count,
lower resistor cost, and high reliability.
The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost
and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s self-pas-
sivating TaNSil
®
resistor film.
The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be
100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses
created by soldering and temperature excursions.
For applications requiring high performance resistor networks in a low cost, surface mount package, specify
IRC SOIC resistor networks.
Electrical Data
Resistance Range
Absolute Tolerance
Ratio Tolerance to R1
Absolute TCR
Tracking TCR
Element Power Rating @ 70°C
Isolated Schematic
Bussed Schematic
Power Rating @ 70°C
SOIC-N Package
Power Rating @ 70°C
SOIC-W Package
Rated Operating Voltage
________________
Operating Temperature
Noise
(not to exceed
√
Power X Resistance)
10R to 250K
To ±0.1%
To ±0.05%
To ±25ppm/°C
To ±5ppm/°C
100mW
50mW
8-Pin
14-Pin
16-Pin
16-Pin
20-Pin
400mW
700mW
800mW
1.2W
1.5W
Environmental Data
Test Per
MIL-PRF-83401
Thermal Shock
Power
Conditioning
High Temperature
Exposure
Short-time
Overload
Low Temperature
Storage
Life
Typical
Delta R
±0.02%
±0.03%
±0.03%
±0.02%
±0.03%
±0.05%
Max
Delta R
±0.1%
±0.1%
±0.05%
±0.05%
±0.05%
±0.1%
100 Volts
-55°C to +125°C
<-30dB
General Note
General
Note
General
Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s
right to
to make changes
product specification without notice or liability.
Electronics
reserves the right
and is
changes in
in product
going to print.
TT electronics
reserves the
own data
make
considered accurate at time of
specification without notice or liability.
All
information
subject to TT Electronics’
South Staples
and
Corpus Christi Texas
at time of
All
information is
is subject to TT electronics’ own data
Street •
is considered accurate at time of
to print.
© IRC Advanced Film Division
• 4222
own data and is considered accurate
78411 USA
going
going to print.
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
BI Technologies IRC Welwyn
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
www.ttelectronics.com/resistors
SOIC Series Issue January 2009 Sheet 1 of 4
A subsidiary of
TT electronics plc
©
TT Electronics plc
electronics plc
06.18
11. 13
Surface Mount SOIC
Surface Mount SOIC
Resistor Networks
Resistor Networks
Surface Mount SOIC
Resistor Networks
SOIC Series
SOIC Series
Manufacturing Capability Data
ISOLATED SCHEMATIC A
BUSSED SCHEMATIC B
Best
Tracking
(±ppm/°C)
50
10
5
5
Best
Tracking
(±ppm/°C)
100
50
10
5
10
5
5
Best
Tracking
(±ppm/°C)
100
10
50
Best
Tracking
5
5
(±ppm/°C)
10
5
5
100
50
10
5
5
5
50
50
10
5
5
50
5
10
Ohmic
Range
(Ω)
10-25
26-50
51-100
101-200
Ohmic
Range
201-500
(Ω)
501-100K
10-25
26-50
26-50
51-100
51-100
101-200
101-200
Ohmic
Range
201-500
201-500
(Ω)
501-100K
501-100K
10-25
51-100
26-50
Ohmic
Range
101-200
51-100
(Ω)
201-500
101-200
10-25
26-50
501-100K
201-500
51-100
201-500
501-100K
101-200
501-100K
51-100
26-50
201-500
101-200
51-100
501-100K
201-500
101-200
26-50
501-100K
201-500
51-100
201-500
501-100K
Available
Ratio
Tolerances
FG
DFG
Best
Tracking
(±ppm/°C)
200
100
50
25
Best
Tracking
20
(±ppm/°C)
5
200
100
50
25
Best
Tracking
20
(±ppm/°C)
5
200
50
100
Best
Tracking
25
50
(±ppm/°C)
20
25
200
100
5
20
50
20
5
25
5
50
100
20
25
50
5
20
25
100
5
20
50
Welwyn
20
5
25
5
50
Surface Mount QSOP
Resistor Networks
Absolute
TCR
(ppm/°C)
Ohmic
Range
(Ω)
10-25
Available
Tolerances
FGJ
Available
Ratio
Tolerances
FG
26-50
DFGJ
C FG
Manufacturing Capability
D
Data
51-200
250
Absolute
TCR
(ppm/°C)
201-250K
Ohmic
Range
(Ω)
10-25
CDFGJ
CDFG
ISOLATED SCHEMATIC A
BCDFGJ ABCDFG
Available
Available
Ratio
Tolerances
Tolerances
FGJ
FG
Available
Tolerances
FGJ
FGJ
DFGJ
CDFG
BUSSED SCHEMATIC B
DFGJ
Available
BCDFGJ
Tolerances
BCDFG
Available
Ratio
BCDFG
Tolerances
Surface Mount QSOP
Resistor Networks
26-50
DFGJ
C FG
26-50
DFGJ
C DF G
Manufacturing Capability
D
Data
51-200
51-200
CDFGJ
CDFG
CDFGJ
CDFG
ISOLATED SCHEMATIC A
BCDFGJ
BCDFGJ
B C D FJG J A B C D F G
FG
FG
FGJ
DFG
DFG
Surface Mount QSOP
Resistor Networks
250
Available
Manufacturing Capability Data
Tolerances
10-25
Absolute
TCR
(ppm/°C)
50
250
100
26-50
26-50
Ohmic
Range
51-200
51-200
(Ω)
201-250K
201-250K
10-25
26-50
51-200
51-200
250
25
201-250K
201-250K
26-50
26-50
51-200
B C DGG J
BD F G J J
CDFG
DFF J
CDFGJ
AA B F G G
BCDG
CDFF
CDFG
CDFG
FGJ
FG
ISOLATED SCHEMATIC A
DFGJ
DFGJ
Available
CDFGJ
CDFGJ
Tolerances
B CFD FJG J
BCDFGJ
G
DFGJ
CDFGJ
CDFGJ
CDFG
CDFG
Available
Ratio
CDFG
CDFG
Tolerances
ABDF
AA B F G G
B C GG
FF
CDFG
CDFG
CDFG
100
Absolute
TCR
(ppm/°C)
201-250K
201-250K
Ohmic
Range
(Ω)
AA B F G G
BCDF
Available
Ratio
Tolerances
CDFG
DFGJ
CDFG
BUSSED SCHEMATIC B
DFGJ
Available
BCDFGJ
Tolerances
BCDFG
BCDFG
Available
Ratio
BCDFG
BCDFG
Tolerances
B CFD FJG
SCHEMATIC
F G
ABCG
B
G
FD
BUSSED
J A B C D F G
DFGJ
FGJ
Available
DFGJ
Tolerances
B C DGG J
D F FJJ
FG
CD F G
DFG
Available
Ratio
BC D F G
CDFG
Tolerances
B CFD F G
B C DGF G
G
BD F F G
CDF
B CFD FJG J AB C D G G
DF FJ
B C DGG J
BB D F F
CDFG
A C C D GG
DFGJ
B C D G G J ABC CDFFG G
BCD DG G
D F FJJ
FG
DF F
B C DGG J
DFF J
B C DGG J
DFF J
G
B CFD FJG J
BC D FFG
BCDFG
CD G
ABBC D FFG
CD G
D FDFF G
ABBC D G G
C
50
ABFG
© IRC Advanced
201-250K
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
Film Division
B C D F G J
100
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
SOIC Series Issue January 2009 Sheet 2 of 4
26-50
General Note
General Note
DFGJ
CDFGJ
CDFG
CDFG
ADFG
CBFG
TT Electronics reserves the right to
to make changes
product specification without notice
notice or liability.
TT electronics reserves the right
make changes in
in product specification without
or liability.
25
All information is
is subject to TT electronics’ own data and is considered accurate at
of going
going to print.
All information
subject to TT Electronics’ own data and is considered accurate at time
time of
to print.
51-200
D FJ
B
BI
D G G J ABC CDFFG
IRC
C F
Technologies
FG
BCD D G
© TT Electronics plc
plc
© TT electronics
100
201-250K
26-50
51-200
B C DGG J
DFF J
CDFGJ
5
50
10
101-200
www.bitechnologies.com
A
www.irctt.com
DFGJ
BC CDFFG G
C
G
501-100K
B C DGG J
B DDF
51-100
DF FJ
201-500
101-200
B C DGG J
DFF J
BCDFG
BCDFG
www.ttelectronics.com/resistors
www.welwyn-tt.com
CDFG
20
25
06.18
11. 13
Surface Mount SOIC
Surface Mount SOIC
Resistor Networks
Resistor Networks
SOIC Series
SOIC Series
N
(4.902 ± 0.102) (8.661 ± 0.102) (9.906 ± 0.102) (10.211 ± 0.102) (12.751 ± 0.102)
E
H
A
(5.994 ± 0.203)
(3.886 ± 0.102)
(1.626 ± 0.102)
(0.191 ± 0.254)
(10.312 ± 0.203)
(7.493 ± 0.102)
(2.540 ± 0.102)
(0.279 ± 0.051)
1
2
3
0.050" Typ
Note: N = number of pins (8, 14, 16)
D
A
C
0.016" ± .002"
0.007" ±0.003"
0° min / 8° max
.033"±0.017
N
N
R1
1
2
3
1
% Of Rated Power
R1
100
2
3
Schematic A
Isolated
N
50
Schematic B
Bussed
Note: N = number of pins (8, 14, 16)
R1
10
1
2
3
25
70
125
Schematic B
Bussed
Note: N = number of pins (8, 14, 16)
Ambient Temperature (°C)
© IRC Advanced Film Division
• 4222 South Staples Street • Corpus Christi
Texas
78411 USA
Telephone:
361 992 7900 •
Facsimile:
361 992 3377 •
Website:
www.irctt.com
SOIC Series Issue
January
2009 Sheet 3 of 4
General Note
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
TT electronics
is subject to
right to make changes in product specification without
of going
liability.
All information
reserves the
TT Electronics’ own data and is considered accurate at time
notice or
to print.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT Electronics plc
© TT electronics plc
06.18
11. 13
Surface
Mount SOIC
Surface
Mount SOIC
Resistor
Networks
Resistor
Networks
SOIC Series
Surface Mount SOIC
Resistor Networks
SOIC Series
GUS - SS4A - 01 - 1002 - F
B
Ordering Data
Prefix
(Inclusion of Prefix is preferred but, historically, it may have been omitted.)
SS4A =
SS4ALF =
SS4B =
SS4BLF =
Style, Schematic and Termination
8-pin SOIC-N, 4 Isolated Resistors; Sn/Pb terminations
8-pin SOIC-N, 4 Isolated Resistors; 100% tin (Pb-free) terminations
8-pin SOIC-N, 7 Bussed Resistors; Sn/Pb terminations
8-pin SOIC-N, 7 Bussed Resistors; 100% tin (Pb-free) terminations
SS7A =
SS7ALF =
SS7B =
SS7BLF =
14-pin SOIC-N, 7 Isolated Resistors; Sn/Pb terminations
14-pin SOIC-N, 7 Isolated Resistors; 100% tin (Pb-free) terminations
14-pin SOIC-N, 13 Bussed Resistors; Sn/Pb terminations
14-pin SOIC-N, 13 Bussed Resistors; 100% tin (Pb-free) terminations
SS8A =
SS8ALF =
SS8B =
SS8BLF =
16-pin SOIC-N, 8 Isolated Resistors; Sn/Pb terminations
16-pin SOIC-N, 8 Isolated Resistors; 100% tin (Pb-free) terminations
16-pin SOIC-N, 15 Bussed Resistors; Sn/Pb terminations
16-pin SOIC-N, 15 Bussed Resistors; 100% tin (Pb-free) terminations
SL8A =
SL8ALF =
SL8B =
SL8BLF =
16-pin SOIC-W, 8 Isolated Resistors; Sn/Pb terminations
16-pin SOIC-W, 8 Isolated Resistors; 100% tin (Pb-free) terminations
16-pin SOIC-W, 15 Bussed Resistors; Sn/Pb terminations
16-pin SOIC-W, 15 Bussed Resistors; 100% tin (Pb-free) terminations
SL0A =
SL0ALF =
SL0B =
SL0BLF =
20-pin SOIC-W, 10 Isolated Resistors; Sn/Pb terminations
20-pin SOIC-W, 10 Isolated Resistors; 100% tin (Pb-free) terminations
20-pin SOIC-W, 19 Bussed Resistors; Sn/Pb terminations
20-pin SOIC-W, 19 Bussed Resistors; 100% tin (Pb-free) terminations
Absolute TCR Code
00 = ±250ppm/°C; 01 = ±100ppm/°C
02 = ±50ppm/°C; 03 = ±25ppm/°C
Resistance Code
4-Digit Resistance Code
Ex: 1002 = 10K , 50R1 = 50.1
(The USA style coding shown is preferred, but, historically, European style coding (e.g. 10K) may have been used.)
Absolute Tolerance Code
J = ±5%; G = ±2%; F = ±1%; D = ±0.5%
C = ±0.25%; B = ±0.1%
Optional Ratio Tolerance Code
G = ±2%; F = ±1%; D = ±0.5%;
C = ±0.25%; B = ±0.1%; A = ±0.05%
Packaging
Specify tubes or tape & reel.
Tape and reel packaging is compliant with EIA-481-D: 8 mm through 200 mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components
for Automatic Handling.
Tube packaging drawing detail available upon request.
© IRC Advanced Film Division
• 4222 South Staples Street • Corpus Christi
Texas
78411 USA
Telephone:
361 992 7900 •
Facsimile:
361 992 3377 •
Website:
www.irctt.com
SOIC Series Issue
January
2009 Sheet 4 of 4
General
Note
General
Note
TT Electronics
reserves the right
make changes in
in product specification without notice or liability.
TT electronics
reserves the right to
to make changes
product specification without notice or liability.
All
information
subject to TT Electronics’ own data and is considered accurate at time of going to print.
All
information is
is subject to TT electronics’ own data and is considered accurate at time of going to print.
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
©
TT electronics plc
©
TT Electronics plc
06.18
11.13
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TT Electronics
:
GUS-SS4ALF-03-5002-BA GUS-SS8ALF-03-3001-BA GUS-SS8BLF-03-1002-FD GUS-SS4ALF-03-5002-DB GUS-
SS4ALF-03-1002-BA GUS-SS7ALF-03-1002-BA GUS-SS4ALF-03-1001-BB GUS-SS4ALF-03-1003-FD GUS-
SS8ALF-03-2001-DB GUS-SS8ALF-03-5001-DB GUS-SS8ALF-03-4002-BB GUS-SS7ALF-03-1003-DB GUS-
SS8BLF-03-4751-FD GUS-SS8ALF-03-1003-BB GUS-SS4ALF-03-1002-BB GUS-SS4ALF-03-2002-BA GUS-
SS8ALF-03-2001-BB GUS-SS7ALF-03-1002-BB GUS-SS4ALF-03-2002-DB GUS-SS8ALF-03-1001-BB GUS-
SS8BLF-03-1001-FD GUS-SS8ALF-03-3400-DB GUS-SS4ALF-03-1003-BA GUS-SS8ALF-03-1003-FD GUS-
SS8ALF-03-4702-DB GUS-SS4ALF-03-5001-DB GUS-SS4ALF-03-1001-BA GUS-SS4ALF-03-5001-BA GUS-
SS8ALF-03-1003-BA GUS-SS4ALF-03-1003-DB GUS-SS8ALF-03-5002-DB GUS-SS4ALF-03-3002-BA GUS-
SS8ALF-03-1001-BA GUS-SS4ALF-03-1001-DB GUS-SS8ALF-03-1002-DB GUS-SS8ALF-03-5001-BA GUS-
SS4ALF-03-1003-BB GUS-SS8ALF-03-1000-DB GUS-SS4ALF-03-7501-BB GUS-SS4BLF-03-2001-BB GUS-
SS8ALF-03-5002-BB GUS-SS4ALF-03-2001-DB GUS-SS8BLF-03-2002-BB GUS-SS8ALF-03-5002-BA GUS-
SS8ALF-03-1002-BA GUS-SS8ALF-03-2002-BB GUS-SS8ALF-03-1502-DB GUS-SS4ALF-03-4002-BB GUS-
SS8ALF-03-2002-BA GUS-SS8ALF-03-1003-DB GUS-SS4ALF-03-2001-BB GUS-SS4ALF-03-5002-BB GUS-
SS8ALF-03-2002-DB GUS-SS8BLF-03-5001-FD GUS-SS4ALF-03-5001-BB GUS-SS8ALF-03-5001-BB GUS-
SS4ALF-03-1002-FD GUS-SS8ALF-03-1003-B GUS-SS4ALF-03-4991-BB GUS-SS4B-01-4702-G-2629 GUS-SS4A-
03-2002-B
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
