UM10492
PTN3460 eDP to LVDS bridge IC application board
Rev. 1.1 — 16 March 2015
User manual
Document information
Info
Keywords
Abstract
Content
PTN3460, DisplayPort, eDP, LVDS, bridge, application board
This user manual presents demonstration/application board capability of
interfacing an (embedded) DisplayPort source to an LVDS panel. The
application board (nicknamed ‘DPLVDS1’) is intended for use as an
evaluation and customer demonstration tool, as well as a reference
design.
NXP Semiconductors
UM10492
PTN3460 eDP to LVDS bridge IC application board
Revision history
Rev
1.1
1
Date
20150316
20140903
Description
Table 3;
Removed remark for JP10
User manual; initial release
Contact information
For more information, please visit:
http://www.nxp.com
For sales office addresses, please send an email to:
salesaddresses@nxp.com
UM10492
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2015. All rights reserved.
User manual
Rev. 1.1 — 16 March 2015
2 of 14
NXP Semiconductors
UM10492
PTN3460 eDP to LVDS bridge IC application board
1. Introduction
This user manual describes the PTN3460 application board with 1080p LCD panel made
by AUO (part number M215HW03 V1), including:
•
Overall PCB connectors, jumpers, and power supplies
•
Equipment/tools that this board interfaces with during bench testing
•
System-level connections, such as cables and connectors, into which this board will
be plugged
This application board is intended to demonstrate the bridging capabilities of PTN3460 on
DP to LVDS conversion. It is also used to evaluate competitor’s ICs such as Parade’s
PS8615, which is pin-to-pin compatible with PTN3460.
A separate document,
“Application test plan”
will be provided to list items to be verified at
the system level.
1.1 Purpose
•
For internal engineers to evaluate the performance of PTN3460 and to develop
firmware, including collecting and verifying system-level features, performance, and
functionality, such as:
–
Verify power management schemes
–
Power sequence
–
Power consumption measurement during various operating modes
–
Allow access to test points and jumpers for measurement and configuration
purposes
–
Flash over AUX
–
Programming test via I
2
C-bus
•
For marketing to demonstrate DP-LVDS to customers in the field
–
Functional and interoperability test
–
This board should be connected to a DP or an eDP source
–
This board is powered by ATX 20-pin power supply, or
–
External power supplies with +3.3 V (1 A), +5 V (1 A), +12 V (2 A)
–
This board is connected directly to AUO 21-inch LVDS panel, or
–
Connect to NoteBook 14-inch LVDS panel via an AUO-NB adaptor board
•
For customers to evaluate PTN3460
–
Use I
2
C-bus to program EDID
UM10492
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2015. All rights reserved.
User manual
Rev. 1.1 — 16 March 2015
3 of 14
51单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
